2 KASIM 2015 TR-ENG katalog.cdr
Transkript
2 KASIM 2015 TR-ENG katalog.cdr
Kaliteli Döküm ve Kaliteli Yüzey High Quality Casting Surfaces GÜNDOĞDU EKZOTERMİK SİSTEMLERİ Kalite detaylarda gizlidir Quality is in the details Dökümhaneler için besleme sistemleri ve çözümleri GÜNDOĞDU EKZOTERMİK SİSTEMLERİ DÖKÜM ÜRÜN. MAK. İM. İNŞ. SAN. ve TİC. LTD. ŞTİ. Address: İstiklal Mah. 12. Cadde No:12 1.OSB Yanı BEYKÖY DÜZCE / TURKEY Phone : +90 380 551 26 30 - 27 10 • Fax :+90 380 551 26 25 www.gesdokum.com • info@gesdokum.com Feeding systems and solutions for foundries GUNDOGDU EXOTHERMIC SYSTEMS GUNDOGDU EXOTHERMIC SYSTEMS DBS 104 TYPE MINI RISER TE PA NTE D DBS 400 TYPE MINI RISER TE PA NTE D DBS 35 TYPE MINI RISER TEN PA TED GÜNDOĞDU EKZOTERMİK SİSTEMLERİ DÖKÜM ÜRÜN. MAK. İM. İNŞ. SAN. ve TİC. LTD. ŞTİ. İstiklal Mah. 12. Cadde No:12 1.OSB Yanı BEYKÖY DÜZCE / TURKEY TEL : +90 380 551 26 30 - 27 10 • FAX :+90 380 551 26 25 www.gesdokum.com • info@gesdokum.com info@gesdokum.com www.gesdokum.com GUNDOGDU EXOTHERMIC SYSTEMS GUNDOGDU EXOTHERMIC SYSTEMS EKZOTERMİK BESLEYİCİ İÇİN SHELL KIRICI (SHELL BREAKER FOR EXOTHERMIC FEEDER) KX 3.5/5 KX 4/7 KX 4/95 KX 5/8 KX 6/9 KX 6/12 KX 6/13 KX 7/10 KX 8/11 KX 9/12 KX 10/13 KX 11/14 KX 12/15 KX 14/15 KX 16/15 A B h C A 53 62 57 73 80 80 80 94 101 114 126 139 154 173 197 B 20 20 30 30 30 30 30 35 40 45 50 55 60 70 80 C 52 60 56 72 79 79 79 93 100 113 125 137 152 172 196 h 7 7 7 8 8 8 8 8 10 10 10 12 12 12 14 G .E.S. HAKKINDA Gündoğdu Ekzotermik Sistemleri fabrika ve idari binası kendi arazisi üzerinde açık ve kapalı olmak üzere 12.000 m2 lik bir alanda Düzce 1. OSB’nin hemen yanında faaliyet göstermektedir. Gündoğdu Ekzotermik Sistemleri; demir ve çelik döküm sanayinde kullanılmak üzere besleyici gömlek ve ekzotermik besleyici adı verilen ürünler üretmektedir. Bu konuda 30 yıllık tecrübeyi bünyesinde toplayıp kısa sürede Türkiye'de kendi sektöründe ilk iki firmadan biri olmuştur. G.E.S. 2014 yılında taşındığı yeni üretim tesisinde yıllık üretim kapasitesini 12.000.000 adete ulaştırmıştır. Bünyesinde bulunan kalıphanesinde müşteriler tarafından özel ölçülerde istenilen mini besleyici ve ekzotermik besleyici gömlek kalıpları kısa zamanda üretilebilmektedir. OKX TİPİ EKZOTERMİK BESLEYİCİ İÇİN SHELL KIRICI (SHELL BREAKER FOR OKX TYPE EXOTHERMIC FEEDER) OKX 4 OKX 5 OKX 6 OKX 7 A B A1 B1 C C1 A 90 120 140 164 B 35 35 40 45 C 87 115 135 159 A1 174 200 240 284 20 info@gesdokum.com B1 100 112 140 168 A C1 170 195 235 279 h 8 14 14 14 BOUT G.E.S. Gundogdu Exothermic Systems operates in an area near Duzce 1st Organized Industrial Site, consisting indoor and outdoor areas of 12.000m2 including the factory and the administrative building. Gundogdu Exothermic Systems produces such products named as mini risers and exothermic feeder sleeves to be used in iron,steel and casting industries. With an experience of 30 years regarding this issue, G.E.S has become one of the two best prominent companies in this area. After moving to the new production site in 2014, G.E.S has reached an annual production capacity of 12.000.000 items. In it's chamber facility, G.E.S is able to produce mini risers and exothermic feeder sleeves coating moulds upon the special requests of customers. 1 www.gesdokum.com GUNDOGDU EXOTHERMIC SYSTEMS GUNDOGDU EXOTHERMIC SYSTEMS M İSYON MİNİ BESLEYİCİ İÇİN SHELL KIRICI (SHELL BREAKER FOR MINI RISERS) shell kırıcı(silica sand breaker cores) Dökümhanelerde dökümde kullanılmak üzere üret len yüksek, düşük veya zolasyon karakterl besley c gömlekler kal tel , ucuz ve zamanında tedar k etmek her dökümhanen n hakkıdır. B z bunu sağlamak ç n çalışıyoruz. V kırılma alanı (breaking area) İZYON Yen l klere ve teknoloj ye ayak uydurmak; çok çalışmak, araştırmak ve teknoloj y tak p etmekle mümkündür. G.E.S teknoloj y ve gereks n mler tak p ederek,kend alanında ler y gören çalışmalar yapıp müşter ht yaçlarını karşılamayı prens p ed nm şt r. M DB-DBS 12 40/15 DB-DBS 15 40/15 DB-DBS 19 40/15 DB-DBS 20 40/15 DB-DBS 27 58/25 DB-DBS 40 58/18 DB-DBS 40 58/25 DB-DBS 400 58/18 DB-DBS 400 58/25 DB-DBS 61 58/18 DB-DBS 61 58/25 DB-DBS 74.8 65/25 DB-DBS 11.1 78/25 DB-DBS 133 96/25 DB-DBS 193 100/25 D (mm) 40 40 40 38 56 60 60 60 60 60 60 66 82 98 100 d (mm) 15 15 15 15 25 18 25 18 25 18 25 25 25 25 25 ISSION DB-DBS 12 40/15 DB-DBS 15 40/15 DB-DBS 19 40/15 DB-DBS 20 40/15 DB-DBS 27 58/25 DB-DBS 40 58/18 DB-DBS 40 58/25 DB-DBS 400 58/18 DB-DBS 400 58/25 DB-DBS 61 58/18 DB-DBS 61 58/25 DB-DBS 74.8 65/25 DB-DBS 11.1 65/25 DB-DBS 133 96/26 ISION Keep ng up w th the nnovat ons and the advanc ng technology s only poss ble w th an adaquate research and keep ng pace w th the technology. G.E.S have taken, follow ng the technology and the necess t es, conduct ng fars ghted stud es n t's own field and sat sfy ng the needs of the customers, as a pr nc ple. 2 info@gesdokum.com l (mm) 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 A (cm2) 1,76 1,76 1,76 1,76 4,90 2,54 4,90 2,54 4,90 2,54 4,90 4,90 4,90 4,90 4,90 MİNİ BESLEYİCİ İÇİN METAL KIRICI (METAL BREAKER FOR MINI RISERS) Every foundry has a r ght to supply tself n a t mely manner w th h gh-class and cheap m n r sers and exotherm c feeder sleeves that have h gh,low or solat on character st cs and that are produced to be used n foundr es. As G.E.S, we are work ng hard to prov de these pr v leges. V h (mm) 9.5 9.5 9.5 9.5 11 11 11 11 11 11 11 11 12.5 12.5 12.5 D (mm) 40 40 40 40 58 58 58 58 58 58 58 65 65 96 d (mm) 15 15 15 15 25 18 25 18 25 18 25 25 25 25 h (mm) 12 12 12 12 12 12 12 12 12 12 12 12 12 12 19 www.gesdokum.com GUNDOGDU EXOTHERMIC SYSTEMS GUNDOGDU EXOTHERMIC SYSTEMS METALL AND SHELL BREAKERS DMQ Seri MK Seri P ED NT ATE T * * * * * EKNİK ÖZELLİKLER VE AVANTAJLAR Yüksek ısı ve düşük ısılı besley c ler steğe bağlı florsüz ve düşük florürlü olarak üret lmekted r. Nötr CO2 salınımı ve reç nes z yapısıyla h ç b r zararlı gaz çermemekted r. Metal kırıcı kullanımıyla döküm yüzey le daha az temas ve döküm sonrası daha az şç l kle; kal tey artırır, şç l ğ azaltır. İsteğe bağlı özel ölçülerle üreteb len Yüksek ve düşük ısılı besley c ler dökümhaneler n kompleks döküm hatlarında b le kolay uygulama ve besleme mkânı sunmaktadır. Gundogdu Ekzoterm k S stemler nde bulunan; patentl 100-300 m kron arası özel üret m hammadde yapı ve n tel ğ bakımından ürünler m ze; basınca dayanıklılık, sıcaklığı zole etme, ısı kaybını önleme ve geç soğumayı sağlama g b özell kler katmaktadır. TKMQ Seri KMQ Seri TE PA D NTE * * * * * T ECHNICAL SPECIFICATIONS AND ADVANTAGES Both h gh-temperatured and low-temperatured m n r sers and exotherm c feeder sleeves can be produced as both fluor de-free or low-fluor ded depend ng on the request. The m n r sers and exotherm c feeder sleeves don't conta n any harmful gases w th neutral CO2 em ss on and t's nonres nous character. The less nteract on w th the mould ng surface, due to the usage of metal breakers ncreases the qual ty w th less craftsmensh p after mould ng. H gh and low temperatured r sers that can be produced upon requests w th spec al measures prov des easy appl cat on and feed ng opportun t es even n the complex mould ng l nes of the foundr es. Gundogdu Exotherm c Systems' patented spec al made raw mater als that are between 100-300 m crons, contr butes our products n terms of, pressure res stancy, heat solat on, prevent ng heat loss and prov d ng late-cool ng. 18 info@gesdokum.com 3 www.gesdokum.com GUNDOGDU EXOTHERMIC SYSTEMS GUNDOGDU EXOTHERMIC SYSTEMS DÖKÜMDE BESLEME SİSTEMLERİ EKZOTERMİK VE MİNİ BESLEYİCİLER OKX OVAL TİPİ EKZOTERMİK BESLEYİCİ (OKX OVAL TYPE EXOTHERMIC FEEDER) Döküm yapılırken, katılaşan metal n hac msel çekmes sonucu meydana gelecek boşlukları doldurab lecek kadar sıvı metal n s stemde var olması gerek r. ØA Bu büzülme Øa le oluşacak boşlukların, b r kaynaktan (rezervuar) sıvı metalle beslenmes ne, dökümün beslenmes bu sıvı metal kaynağına da besley c adı ver l r. ØB Øb Besley c ler n ç ndek er y k metal, esas döküm parçası katılaşana dek sıvı halde kalmalı yan döküm parçasından daha sonra katılaşmalıdır. H * Besley c ler, mutlaka esas döküm parçasından sonra katılaşmalıdır. * Besley c ler, döküm parçasının çek lmes n karşılayacak kadar sıvı metal kapas tes ne sah p olmalıdır. * Besley c tasarımında, besley c sayısı, besley c boyutu ve kes lme mal yet m n mum olmalıdır. * Besley c ler, besleme mesafes kurallarına uygun ve yönlenm ş katılaşmayı tem n edecek şek lde tasarlanmalıdır. H B r döküm parçası üret m nde, besley c ler şu temel koşulları yer ne get rmel d r. FEEDING SYSTEMS IN CASTING EXOTHERMIC FEEDER SLEEVES AND MINI RISERS Dur ng the cast ng process, the l qu d metal that w ll f ll the gaps as a result of volumetr c shr nkage of the sol d f ed metal has to be present n the system. L qu d metal feed ng from a source (reservo r) of these gaps, result ng from the shr nkage s called feed ng of the mould ng and th s l qu d metal source s called, feeder. The molten metal conta ned n the feeders must be kept n l qu d form unt l the ma n cast ng p ece gets sol d, and must be sol d f ed after the cast ng p ece. In a process of cast ng p ece product on, the feeders must fulf ll the ma n cond t ons stated below: * The feeders must be sol d f ed obv ously after the cast ng p ece. * The feeders must have the l qu d metal capac ty that w ll meet the shr nkage of the cast ng p ece. * In a feeder des gn, the number, the s ze and the d sjuncture cost of the feeders must be m n mum. * The feeders must be des gned to comply w th the feed ng d stance spec f cat ons and preferred sol dat on. 4 info@gesdokum.com TYPE OKX 4 OKX 5 OKX 6 OKX 6/300 OKX 7 OKX 7/300 OKX 8 OKX 8/300 OKX 9 OKX 10 OKX 10/300 OKX 10,5/300 OKX 11 OKX 11/300 OKX 12/300 OKX 13/300 OKX 14/300 MODULE (cm) OKX GEOM 2,60 1,70 3,00 2,00 3,90 2,60 4,20 2,80 4,40 2,90 4,80 3,20 4,80 3,20 5,60 3,70 5,20 3,60 5,50 3,80 6,40 4,40 6,50 4,50 6,10 4,20 6,80 4,70 7,50 5,20 7,90 5,50 8,80 6,10 DIMENSIONS(mm) a A b 60 90 144 80 120 160 100 140 200 100 140 200 120 164 240 120 164 240 140 188 280 140 188 280 160 212 320 180 236 360 180 236 360 235 287 325 200 260 400 200 260 400 230 296 455 250 314 495 300 359 600 B 174 200 240 240 284 284 328 328 372 416 416 377 460 460 521 559 659 H 150 150 200 300 200 300 200 300 200 200 300 300 200 300 300 300 300 VOLUME dm3 1,2 1,7 3,5 5,3 5,1 7,7 7,0 10,5 9,1 11,6 17,3 19,7 14,3 21,4 28,0 33,1 48,2 17 www.gesdokum.com GUNDOGDU EXOTHERMIC SYSTEMS GUNDOGDU EXOTHERMIC SYSTEMS BO TİPİ EKZOTERMİK BESLEYİCİ (BO TYPE EXOTHERMIC FEEDER) * EKZOTERMİK BESLEYİCİLER * MİNİ BESLEYİCİLER * ÖRTÜ TOZLARI - EXOPOWDER 01 * EXOTHERMIC FEEDER SLEEVES * MINI RISERS * COVERING POWDERS - EXOPOWDER 01 Gündoğdu Ekzoterm k S stemler tarafından üret len Ekzoterm k Besley c ler dem r ve çel k dökümde kullanılmaktadır. G.E.S. bünyes nde şu anda 7 farklı modelde kum bazlı Ekzoterm k Besley c üret m yapılmakatadır. Ekzoterm k Besley c ler b r çok ölçü ve şek lde standart olarak üret leb ld ğ g b müşter ler n özel stek ve talepler ne göre kalıp hazırlama ün tem zde kısa süre çer s nde de üret leb lmekted rler. M n Besley c ler yüksek ekzoterm k özell kler neden yle Ekzoterm k Besley c lere göre daha yüksek derecelerde daha uzun sürelerde yanmakta ve daha yüksek besleme kapas tes sağlamaktadır. M n Besley c ler dem r ve çel k dökümünde kullanılırlar ve d ğer Ekzoterm k Besley c lere göre yaklaşık yüzde 60-70 oranında daha fazla ver ml l k sağlayab lmekted rler. M n Besley c ler özel yapıları sayes nde normal ekzoterm k besley c ler n kolaylıkla uygulanamayacağı küçük ve dar döküm parçaların üret m nde daha ver ml b r şek lde kullanılab lmekted rler. Döküm esnasında açık besley c üzer ne uygulanan, sıcak metalle anında reaks yona g rerek genleşen, sıcak metal n üzer nde nce b r kabuk oluşturarak hızlı soğumayı engellemek suret yle yüksek zolasyon sağlayan, çek nt ler önleyen ve sten ld ğ nde müşter ht yaçlarına göre formüle ed leb len EXOPOWDER 01 adı ver len örtü tozu üret lmekted r. The exotherm c feeder sleeves produced by G.E.S. are used n ron and steel cast ngs. W th n G.E.S, 7 d fferent modeled sand based Exotherm c Feeders are be ng produced. Apart from the standart product on n var ous measures and shapes, Exotherm c Feeders can also be produced n our product on fac l tes n a short t me accord ng to the spec al requests of the customers. TYPE BO 5/8 BO 6/9 BO 7/10 BO 8/11 BO 9/12 BO 10/13 MODULE (cm) BO GEOM 1,50 0,95 1,70 1,05 2,00 1,25 2,25 1,40 2,50 1,55 2,80 1,75 DIMENSIONS(mm) ∅du ∅Du ∅do 51 69 47 57 74 51 69 88 64 78 98 70 88 107 80 97 118 90 16 info@gesdokum.com ∅Do 75 80 95 104 116 128 H 80 91 101 108 119 131 VOLUME dm3 0,15 0,21 0,35 0,46 0,66 0,89 M n R sers, due to the r h gh exotherm c features have much more gn t on durat ons and h gh feed ng capac t es compared to the Exotherm c Feeders. M n R sers are used n ron-steel cast ng and and they are approx mately 60-70% more product ve compared to the Exotherm c Feeders. M n R sers, thanks to the r un que structures can be used n product on of the small and t ght cast ng p eces where Exotherm c Feeders can not be used eas ly. Dur ng the cast ng process a coat ng powder named EXOPOWDER01 s produced that prevents shr nkages, prov des h gh solat on by form ng th n crust on the hot metal prevent ng fast cool ng that expands by engag ng n an nstant react on w th the hot metal and that s appl ed on the feeder dur ng the cast ng process. 5 www.gesdokum.com GUNDOGDU EXOTHERMIC SYSTEMS GUNDOGDU EXOTHERMIC SYSTEMS Ü RETİM VE KALİTE BOX TİPİ EKZOTERMİK BESLEYİCİ (BOX TYPE EXOTHERMIC FEEDER) * GÜNDOĞDU EKZOTERMİK SİSTEMLERİ kuruluşundan t baren ISO 9001-2008 - OHSAS 18001:2007 kal te yönet m s stemler ne göre üret m yapmaktadır. * G.E.S. 2014 yılında taşındığı yen üret m tes s nde yıllık üret m kapas tes n 12.000.000 adete ulaştırmıştır. * M n besley c ve ekzoterm k besley c gömlek olmak üzere 2 ana grup altında 11 ayrı çeş t model ve 200'e yakın ölçüde ürün ve bünyes nde bulunan kalıphanes nde müşter ler tarafından özel ölçülerde sten len m n besley c ve ekzoterm k besley c gömlek kalıpları kısa zamanda üret leb lmekted r. * Döküm esnasında açık besley c üzer ne uygulanan, sıcak metalle anında reaks yona g rerek genleşen, sıcak metal n üzer nde nce b r kabuk oluşturarak hızlı soğumayı engellemek suret yle yüksek zolasyon sağlayan, çek nt ler önleyen ve sten ld ğ nde müşter ht yaçlarına göre formüle ed leb len EXOPOWDER 01 adı ver len örtü tozu üret lmekted r. * B r çok uluslararası patentl ürünü olan G.E.S.’ n AR&GE laboratuvarlarında dökümhaneler n ht yaçlarına yönel k yen l kç ürünler gel şt r lmeye devam ed lmekted r. * “Kal te varılacak b r stasyon değ l, sürekl b r yolculuktur” prens b yle hareket ed lerek; üret m departmanına g ren her hammadde ve yardımcı malzemeler n satın alınmasından müşter ye sevk ne kadar kal te yönet m s stem ne göre kontrolü sağlanmaktadır. * Ser üret m önces ürünlere uzman laboratuvar ek b tarafından sıcaklık anal z ve basınç dayanım testler uygulanmaktadır. * G.E.S. çözüm ortağı olan dökümhaneler n uzman personeller yle b rl kte, yen gel şt r lm ş ürünler n ser üret m önces kalıp çer s nde çalışma testler n n yapılması sağlanmaktadır. P RODUCTION and QUALITY * Gundogdu Exotherm c Systems s nce the day t's been founded carr es out product ons that are n compl ance w th ISO 9001-2008 - OHSAS 18001:2007 qual ty management systems. * G.E.S reached a product on level of 12.000.000 p eces annually n t's new product on fac l ty that G.E.S moved n 2014. * Under two ma n groups cons st ng of m n r sers and exotherm c feeders and 11 d fferent var ety models w th approx mately 200 products; n t's chamber fac l ty, G.E.S s able to produce the m n r sers and exotherm c feeders sleeve chambers that are requested n spec al measures by the customers. * Dur ng the cast ng process a coat ng powder named EXOPOWDER01 s produced that prevents shr nkages, prov des h gh solat on by form ng th n crust on the hot metal prevent ng fast cool ng that expands by engag ng n an nstant react on w th the hot metal and that s appl ed on the feeder dur ng the cast ng process. * G.E.S own ng var ous d fferent nternat onally patented products, cont nues to develop nnovat ve products n t's R&D labs accord ng to the needs of the foundr es. * Operat ng w th t's pr nc pal " Qual ty s not a dest nat on, t's an ongo ng process", G.E.S prov des elaborate qual ty nspect ons from the purchase of the raw mater als and s de elements n the product on department to the r del very to the customer. * Before the mass product on, the products are tested n terms of temperature analys s and pressure res stance by expert lab crews. * G.E.S, before the mass product on, w th the expert personnels of the partner foundr es, prov des operat on tests of the newly developed products n templates. 6 info@gesdokum.com TYPE BOX 1 BOX 2 BOX 3 BOX 4 BOX 5 BOX 6 BOX 6/150 BOX 7 BOX 8 BOX 9 BOX 9/300 BOX 10 BOX 10/300 BOX 11 BOX 11/300 BOX 12 BOX 12/300 BOX 13 BOX 14 BOX 15 BOX 16 BOX 17 BOX 18 MODULE (cm) BOX GEOM 1,40 0,90 1,95 1,25 2,40 1,60 2,80 1,90 3,20 2,15 3,90 2,60 3,80 2,50 4,30 2,85 4,70 3,10 4,80 3,35 5,40 3,75 5,60 3,85 6,40 4,40 6,20 4,30 7,30 5,00 6,80 4,65 8,00 5,55 7,00 5,00 7,40 5,30 7,80 5,55 8,10 5,80 8,10 6,00 8,40 6,20 DIMENSIONS(mm) ∅d ∅D 40 64 60 86 80 110 100 140 120 160 140 180 150 190 160 205 180 230 200 250 200 250 250 305 250 305 300 360 300 360 350 415 350 415 400 465 450 515 500 565 550 618 600 670 650 722 H 150 150 150 150 150 200 150 200 200 200 300 200 300 200 300 200 300 200 200 200 200 200 200 VOLUME dm3 0,20 0,40 0,80 1,20 1,70 3,10 2,70 4,00 5,10 6,30 9,40 9,80 14,70 14,10 21,20 19,20 28,90 25,10 31,80 39,30 47,50 56,50 66,40 15 www.gesdokum.com GUNDOGDU EXOTHERMIC SYSTEMS GUNDOGDU EXOTHERMIC SYSTEMS B TİPİ MİNİ BESLEYİCİ (B TYPE MINI RISER) KX K KONİK TİPİ EKZOTERMİK BESLEYİCİ (KX K CONIC TYPE EXOTHERMIC FEEDER) TYPE KXK 0 KXK 0/150 KXK 1 KXK 1/150 KXK 2 KXK 2/150 KXK 3 KXK 4 KXK 4.5 KXK 5 KXK 5,5 KXK 6 KXK 7 KXK 8 KXK 9 KXK 10 KXK 11 MODULE KXK 1,50 1,61 2,10 2,20 2,30 2,50 2,70 3,20 3,60 4,10 4,40 4,80 5,10 5,50 6,20 7,00 7,70 (cm) GEOM 1,00 1,07 1,40 1,45 1,50 1,70 1,80 2,10 2,40 2,70 2,90 3,20 3,50 3,80 4,30 4,80 5,30 DIMENSIONS(mm) ∅du ∅Du ∅do 30 55 50 34 55 50 38 69 78 38 69 78 45 74 85 45 74 87 48 76 94 60 97 118 65 109 135 70 120 147 80 128 165 87 132 175 100 150 200 110 160 225 124 180 252 150 210 300 175 240 355 14 info@gesdokum.com ∅Do 75 75 100 100 114 115 130 157 177 192 211 222 250 278 310 360 410 h 15 15 27 27 34 34 43 50 65 68 80 90 100 110 120 140 155 H 100 150 100 150 100 150 150 150 180 195 225 250 250 250 300 300 300 VOLUME dm3 0,18 0,36 0,41 0,46 0,48 0,81 0,93 1,40 2,16 3,00 4,05 5,10 6,50 8,00 12,20 17,00 22,60 TYPE B5 B 12 B 20 B 20.5 B 19 B 27 B 31 B 40 B 61 B 74.8 B 11.1 B 133 MODULE (cm) 0,75 0,85 1,30 1,30 0,95 1,30 1,30 1,40 1,70 1,92 2,20 2,50 VOLUME (cm3) 8 16 25 25 28 38 45 58 88 121 159 191 DIMENSIONS(mm) du do Du 16 13 28 21 18 40 21 18 36 21 18 50 25 20 40 25 23 44 25 23 45 32 28 60 36 32 60 41 35 82 50 40 90 50 40 100 Do 50 60 78 78 60 78 55 88 87 109 130 140 h 50 50 85 85 70 85 100 80 97 110 100 120 H 57 62 100 100 82 97 115 90 108 135 122 140 7 www.gesdokum.com GUNDOGDU EXOTHERMIC SYSTEMS GUNDOGDU EXOTHERMIC SYSTEMS DB TİPİ MİNİ BESLEYİCİ (DB TYPE MINI RISER) TYPE DB 5 DB 12 DB 15 DB 20 DB 20.5 DB 19 DB 27 DB 40 DB 40.1 OV. DB 400 DB 61 DB 74.8 DB 11.1 DB 132 DB 133 DB 231 DB 164 DB 166 DB 193 DB 237 DB 238 DB 286 DB 287 DB 420 DB 540 DB 544 MODULE (cm) 0,75 0,85 1,20 1,30 1,30 0,95 1,30 1,40 1,40 1,40 1,70 1,90 2,20 2,50 2,50 2,90 2,20 3,30 2,70 2,80 3,20 3,20 3,40 3,40 3,60 4,20 VOLUME (cm3) 8 16 22 25 25 27 36 56 56 81 88 121 159 191 266 200 238 240 267 276 339 339 408 415 590 770 DIMENSIONS(mm) du do Du 16 13 30 21 19 40 21 18 40 21 18 38 21 18 50 25 20 40 25 23 56 32 28 60 32 28 54 40 37 60 36 32 60 41 35 66 50 40 82 50 40 90 58 48 98 58 32 95 60 50 90 45 37 78 65 60 100 58 48 100 65 55 98 60 57 110 60 50 82 60 50 110 80 75 110 80 75 110 8 info@gesdokum.com Do 50 58 66 80 80 60 78 88 88/76 87 87 106 116 140 133 140 133 142 121 138 140 148 148 148 145 172 h 50 50 70 85 85 70 81 80 79 70 97 110 102 120 120 100 100 180 90 122 122 120 175 175 125 165 KX SX TİPİ EKZOTERMİK BESLEYİCİ (KX SX TYPE EXOTHERMIC FEEDER) H 59 62 85 100 100 84 98 98 90 92 115 135 122 140 141 122 125 205 115 140 144 144 204 202 150 203 TYPE KX SX 3,5/5 KX SX 4/7 KX SX 4/95 KX SX 5/8 KX SX 6/9 KX SX 6/12 KX SX 7/10 KX SX 8/11 KX SX 9/12 KX SX 10/13 KX SX 12/15 MODULE (cm) KX SX GEOM 0,90 0.60 1.05 0.75 1.20 0.80 1.40 0.95 1.55 1.05 1.60 1.10 1,80 1.25 2.05 1.40 2.25 1.55 2.55 1.75 2,90 2.00 DIMENSIONS(mm) du Du do 35.0 53.0 30.5 41.5 62.5 35.5 42.5 63.0 36.0 52.0 73.5 48.0 57.5 80.0 52.5 57.5 80.0 52.5 69.5 94.0 65.0 79.0 102.0 71.5 89.0 115.0 81.0 97.0 127.5 91.0 118.0 154.5 112.0 Do 49.0 59.0 59.0 70.0 76.0 75.0 89.5 99.0 110.0 119.0 148.0 h 39.5 63.0 85.0 70.0 78.5 105.0 87.0 96.5 104.5 117.0 130.0 H 49.5 71.5 97.0 80.0 91.0 120.0 99.0 108.0 120.0 133.0 150.0 VOLUME dm³ 0.03 0.07 0.10 0.13 0.18 0.26 0.30 0.42 0.58 0.80 1.35 TYPE - DIMENSIONS(mm) KX SX a b KX SX 3,5/5 12 2 KX SX 4/7 14 2 KX SX 4/95 14 2 KX SX 5/8 16 2 KX SX 6/9 18 2 KX SX 6/12 18 2 KX SX 7/10 20 3 KX SX 8/11 22 3 KX SX 9/12 24 3 KX SX 10/13 26 3 KX SX 12/15 - 13 www.gesdokum.com GUNDOGDU EXOTHERMIC SYSTEMS GUNDOGDU EXOTHERMIC SYSTEMS KX S TİPİ EKZOTERMİK BESLEYİCİ (KX S TYPE EXOTHERMIC FEEDER) TYPE KX S KX S KX S KX S KX S KX S KX S KX S KX S 3,5/5 4/7 4/95 5/8 6/9 7/10 8/11 9/12 10/13 MODULE (cm) KX SX GEOM 0,95 0.60 1.20 0.75 1.30 0.80 1.50 0.95 1.70 1.05 2,00 1.25 2.25 1.40 2.50 1.55 2.80 1.75 DIMENSIONS(mm) du Du do 35.0 53.0 30.5 41.5 62.5 35.5 42.5 63.0 36.0 52.0 73.5 48.0 57.5 80.0 52.5 69.5 94.0 65.0 79.0 102.0 71.5 89.0 115.0 81.0 97.0 127.5 91.0 12 info@gesdokum.com Do 49.0 59.0 59.0 70.0 76.0 89.5 99.0 110.0 119.0 h 39.5 63.0 85.0 70.0 78.5 87.0 96.5 104.5 117.0 H 49.5 71.5 97.0 80.0 91.0 99.0 108.0 120.0 133.0 VOLUME dm³ 0.03 0.07 0.10 0.13 0.18 0.30 0.42 0.58 0.80 DBS TİPİ MİNİ BESLEYİCİ (DBS TYPE MINI RISER) TYPE DBS 5 DBS 12 DBS 15 DBS 20 DBS 20.5 DBS 19 DBS 27 DBS 35 DBS 35.5 DBS 40 DBS 40.1 OV. DBS 400 DBS 61 DBS 74.8 DBS 104 DBS 11.1 DBS 132 DBS 133 DBS 231 DBS 164 DBS 166 DBS 193 DBS 237 DBS 238 DBS 286 DBS 287 DBS 420 DBS 540 DBS 544 MODULE (cm) 0,75 0,85 1,20 1,30 1,30 0,95 1,30 1,30 1,30 1,40 1,40 1,40 1,70 1,90 1,90 2,20 2,50 2,50 2,90 2,20 3,30 2,70 2,80 3,20 3,20 3,40 3,40 3,60 4,20 VOLUME (cm3) 8 16 22 25 25 27 36 35 27 56 56 81 88 121 104 159 191 266 200 238 240 267 276 339 339 408 415 590 770 DIMENSIONS(mm) du do Du 16 13 30 21 19 40 21 18 40 21 18 38 21 18 50 25 20 40 25 23 56 25 23 55 27 25 60 32 28 60 32 28 54 40 37 60 36 32 60 41 35 66 40 36 66 50 40 82 50 40 90 58 48 98 58 32 95 60 50 90 45 37 78 65 60 100 58 48 100 65 55 98 60 57 110 60 50 82 60 50 110 80 75 110 80 75 110 Do 50 58 66 80 80 60 78 60 64 88 88/76 87 87 106 106 116 140 133 140 133 142 121 138 140 148 148 148 145 172 h 50 50 70 85 85 70 81 86 50 80 79 70 97 110 102 102 120 120 100 100 180 90 122 122 120 175 175 125 165 H 59 62 85 100 100 84 98 100 70 98 90 92 115 135 115 122 140 141 122 125 205 115 140 144 144 204 202 150 203 9 www.gesdokum.com GUNDOGDU EXOTHERMIC SYSTEMS GUNDOGDU EXOTHERMIC SYSTEMS DBS S TİPİ MİNİ BESLEYİCİ (DBS S TYPE MINI RISER) TYPE DBS S 5 DBS S 12 DBS S 15 DBS S 20 DBS S 20.5 DBS S 19 DBS S 27 DBS S 35 DBS S 35.5 DBS S 40 DBS S 40.1 OV. DBS S 400 DBS S 61 DBS S 74.8 DBS S 104 DBS S 11.1 DBS S 132 DBS S 133 DBS S 231 DBS S 164 DBS S 166 DBS S 193 DBS S 237 DBS S 238 DBS S 286 DBS S 287 DBS S 420 DBS S 540 DBS S 544 MODUL (cm) 0,75 0,85 1,20 1,30 1,30 0,95 1,30 1,30 1,30 1,40 1,40 1,40 1,70 1,90 1,90 2,20 2,50 2,50 2,90 2,20 3,30 2,70 2,80 3,20 3,20 3,40 3,40 3,60 4,20 VOLUME (cm3) 8 16 22 25 25 27 36 35 27 56 56 81 88 121 104 159 191 266 200 238 240 267 276 339 339 408 415 590 770 DIMENSIONS(mm) du do Du 16 13 30 21 19 40 21 18 40 21 18 38 21 18 50 25 20 40 25 23 56 25 23 55 27 25 60 32 28 60 32 28 54 40 37 60 36 32 60 41 35 66 40 36 66 50 40 82 50 40 90 58 48 98 58 32 95 60 50 90 45 37 78 65 60 100 58 48 100 65 55 98 60 57 110 60 50 82 60 50 110 80 75 110 80 75 110 10 info@gesdokum.com Do 50 58 66 80 80 60 78 60 64 88 88/76 87 87 106 106 116 140 133 140 133 142 121 138 140 148 148 148 145 172 h 50 50 70 85 85 70 81 86 50 80 79 70 97 110 102 102 120 120 100 100 180 90 122 122 120 175 175 125 165 KX TİPİ EKZOTERMİK BESLEYİCİ (KX TYPE EXOTHERMIC FEEDER) H 59 62 85 100 100 84 98 100 70 98 90 92 115 135 115 122 140 141 122 125 205 115 140 144 144 204 202 150 203 TYPE KX 2/6 KX 3.5/5 KX 3/9 KX 4/7 KX 4/95 KX 5/8 KX 6/9 KX 6/12 KX 6/13 KX 7/10 KX 8/11 KX 9/12 KX 10/13 KX 11/14 KX 12/15 KX 14/15 KX 16/15 MODULE (cm) KX GEOM 0,86 0,54 1,00 0,60 1,10 0,65 1,20 0,75 1,30 0,80 1,50 0,95 1,70 1,05 1,80 1,10 1,85 1,15 2,00 1,25 2,25 1,40 2,50 1,55 2,80 1,75 3,00 1,90 3,20 2,00 4,19 2,62 4,84 3,02 DIMENSIONS(mm) ∅du ∅Du ∅do 24,00 40,00 21,00 35,00 53,00 30,50 32,00 45,50 31,00 41,50 62,50 35,50 42,50 63,00 36,00 52,00 73,50 48,00 57,50 80,00 52,50 57.5 80,00 52,50 57,50 80,00 52,50 69,50 94,00 65,00 79,00 102,00 71,50 89,00 115,00 81,00 97,00 127,50 91,00 107,00 140,00 100,00 118,00 154,50 112,00 134,00 174,00 127,00 160,00 200,00 153,00 ∅Do 37,00 49,00 44,00 59,00 59,00 70,00 76,00 75,00 75,00 89,50 99,00 110,00 119,00 133,00 148,00 167,00 193,00 h 50,00 39,50 80,00 63,00 85,00 70,00 78,50 105,00 115,00 87,00 96,50 104,50 117,00 125,00 130,00 133,00 133,00 H 60,00 49,50 90,00 71,50 97,00 80,00 91,00 120,00 130,00 99,00 108,00 120,00 133,00 140,00 150,00 153,00 153,00 VOLUME dm3 0,01 0,03 0,06 0,07 0,10 0,13 0,18 0,26 0,29 0,30 0,42 0,58 0,80 1,03 1,35 1,71 2,07 11 www.gesdokum.com
Benzer belgeler
db type feeder
Nötr CO2 salınımı ve reç nes z yapısıyla h ç b r zararlı gaz çermemekted r. Metal kırıcı kullanımıyla döküm yüzey le daha az temas ve döküm sonrası daha az şç l kle; kal tey artırır, şç l ğ azaltır...
Detaylıİncele - Thermowood
ga ned the attent on and adm rat on of domest c and nternat onal nvestors and producers. Today we have become a nat onal group of compan es w th ntegrated product on l nes establ shed on 30.000 m² ...
Detaylı