W - IEC
Transkript
W - IEC
Riduttori a vite senza fine serie PSH TPS GEAR SRL Via Emilia 9/14 35043 Monselice (PD) Italy T. +39 0429 773883 F. +39 0429 772028 info@tpsgear.it www.tpsgear.it Producer Distributore per Italia İÇİNDEKİLER CONTENTS Giriş / Intro........................................................................................................................................................... 2 Teknik Bilgiler / Explanatory Notes.....................................................................................................................3 - 8 Radyal Yük Hesabı / Calculation of Radial Loads...............................................................................................9 - 12 Kısaltmalar / Abbreviations..................................................................................................................................13 PSH Tanıtımı / Description of PSH...................................................................................................................... 14 W ve IEC Adaptör Kullanımı / Using of W and IEC Adapter.............................................................................. 15 Kullanım Alanları / Application Areas................................................................................................................. 16 - 20 Kullanılan Terimler / Nomenclature.................................................................................................................... 21 - 22 PSH Modüler Sistemi / Modular System of PSH................................................................................................ 23 Mevcut Dizaynlara Genel Bakış / Overview of Available Designs..................................................................... 24 Ürünlerimiz / Products.........................................................................................................................................25 - 27 Sipariş Örneği / Example for Ordering............................................................................................................... 28 Montaj Pozisyonları ve Yağ Markaları / Mounting Positions and Lubrication Marks.........................................29 - 35 Yağ Miktar Tablosu / Lubrication Levels............................................................................................................. 36 Kilit / Backstop..................................................................................................................................................... 37 Toleranslar / Tolerances...................................................................................................................................... 38 Motor Platformu / Installation of Motor Platform................................................................................................. 39 - 41 Motorlu Seçim Tabloları / Selection Tables of Gearedmotors............................................................................ 43 - 59 Motorlu Ölçü Tabloları / Dimension Tables of Gearedmotors ........................................................................... 61 - 83 W - IEC Adaptörü Seçim Tabloları / Selection Tables of W and IEC Adapters.................................................. 85 - 105 W Ölçü Tabloları / Dimension Tables of W..........................................................................................................107 - 117 IEC Adaptörü Ölçü Tabloları / Dimension Tables of IEC Adapters....................................................................118 - 127 W - IEC Adaptörlerin Ağırlık Tablosu / Weights Table of W and IEC Adapters................................................. 128 Servo Motor Adaptörü / Servomotors Adapter....................................................................................................129 Tork Kolu Ölçü Tablosu / Dimensions Table of Torque Arm...............................................................................130 Merkezleme Pimi Ölçü Tablosu / Dimension Tables of Guide Pins................................................................... 131 Konik Sıktırma / Shrink Disc................................................................................................................................132 Koruma Kapaklı Ölçü Tablosu / Dimension Table of Cover...............................................................................133 IP 66 Uygulaması / Protection IP 66 ...................................................................................................................134 Mekanik Keçe / Mechanical Seal.........................................................................................................................135 Çektirme Ölçü Tablosu / Dimension Table of Fixing Elements...........................................................................136 - 137 PSH Genel Parça Listeleri / General Part Lists of PSH......................................................................................138 - 144 Elektrik Motoru / Electrical Motor........................................................................................................................145 - 199 www.pgr.com.tr 1 GİRİŞ INTRO Redüktörleri oluşturan tüm parçaları modern CNC tezgahlarında ve yatay işleme merkezlerinde imal eden Polat Group Redüktör Ar-Ge çalışmalarına devam etmektedir. PGR, dişlilerin profil taşlamasından sonraki işlem olan HONLAMA yöntemini seçerek, üretimin her kademesinde işlem kontrolü yapmaktadır. Polat Group Redüktör, helis dişlilerde TEKİL GÖVDE kavramını Türkiye’de ilk uygulayan şirkettir. Buna ek olarak P serisinden farklı olarak helis dişlili, tekil gövdeli ( ayaklı, flanşlı, ara milli ve çıkış milli ) PA,PF, PD, PM serisi, helisel konik dişlili PKD serisi ve helisel-sonsuz dişlili PSH serisi redüktörlerin tasarım ve üretim işleri büyük bir özenle tamamlanarak seri üretime geçildi.Rulman, dişli ve mil hesapları DIN 3990 Niemann esasına dayalı profesyonel programa (HEXAGON) göre yapıldı. Tüm dişli ünitelerine sementasyon ve normalizasyon ısıl işlemleri uygulanmaktadır. Helis grubunda tekil gövdeler döküldükten sonra doğal şartlar altında ( yağmur, sıcak ve soğuk doğa şartları ) asgari 5 ay bekletilmekte, gövdeler son şekillerini almakta ve tüm yüzeyler yatay işleme merkezinde aynı anda işlenmektedir. Polat Group Redüktör ayrıca SİKLOİD REDÜKTÖR üzerindeki Ar-Ge çalışmalarına devam etmektedir. Polat Group Redüktör en üst teknolojilerle çalışarak ve Türkiye pazarındaki konumunu koruyarak, yeni ürünler ile ilgili etkinliklerine devam etmektedir. Polat Group Redüktör, tarting it’s trial production work alI the forming reducer on modern CNC machine tools and horizontal machining centers. The company makes process controls in every stages of the production by choosing the HONING METHOD which comes after profile grinding in gears. Polat Group Redüktör is the first company that applies the consept of single body in helical gears in Turkey. Additionally, as being separately from P series, the design and production works of PA,PF, PD, PM, series, helical bevel gear reductors with helical gear and helical-worm gear reductors (PSH) single body (foot, flange, gap solid shaft and solid shaft out) had been completed with great care and started series production. Bearing, gear and shaft calculations are made according to professional softwares ( HEXAGON ) based on DIN 3990 and Niemann basics. Carburizing and normalization heat treatment are applied to all the gear units. In helical group, single bodies are left in the natural conditions ( rain, hot & cold natural conditions ) for a minimum period 5 months after casting and the bodies get 3 their final shapes and then all the surface are treated on horizontal machining center at once at the same. Polat Group Redüktör also continues it’s R&D activities on POLAT SİKLOİD GEAR UNITS. Pola Group Redüktör continues it’s investments for new productions with the aim of high technology and maintaining it’s positions on the Turkish Market. KALİTE POLİTİKAMIZ OUR QUALITY POLICY POLAT GROUP REDÜKTÖR A.Ş. ürünlerinin kalitesinde en iyiyi yakalamak için; sektöründeki teknolojik gelişmeleri takip etmeyi, pazar payındaki istikrarını sürdürmek için müşterilerinin istek ve beklentilerine eksiksiz ve zamanında cevap vererek, sürekli artan müşteri memnuniyetini sağlamayı, eğitimli çalışanlarının performansını huzurlu bir çalışma ortamı sağlayarak arttırmayı ve bu şekilde kalite yönetim sistemini sürekli iyileştirmeyi kalite politikası olarak benimsemiştir. To achieve the best quality of its products, POLAT GROUP REDÜKTÖR A.Ş. adopts with its own quality politics by following the technological developments of its sector, in order to keep up the stabilization on its own market share ensuring the customers’ gladness increasing permanently by answering the customers’ wishes and expectations completely at the right time, to have the well - educated staffs increase their performance by providing a peaceful working place and making better the quality management system all the time. VİZYONUMUZ OUR VISION Müşteri ve çalışan memnuniyetini en üst düzeyde tutan, gelişmeleri izleyen değil yaratan bir dünya şirketi olmaktır. Our vision is to become a world company which keeps the customer satisfaction at the top level and which does not only follow the developments but also creates the developments itself. MİSYONUMUZ OUR MISSION Müşterilerimizin ihtiyaçlarını karşılayacak çözümleri bilgi teknolojilerini kullanarak en verimli ve kaliteli şekilde sunmaktır. Our mission is to provide the solutions to our customers in most efficient and qualified way by make use of the information technologies. Polat Group Redüktör olarak birçok farklı ürün yelpazesi ile, müşteri ihtiyacını maksimum seviyede karşılamak için eş zamanlı mühendislik yöntemlerini kullanarak çalışmalarını sürdürmektedir. Tasarım faaliyetleri, ürün geliştirme programları ve bilgisayar destekli çalışmalarımız sürekli gelişen bir grafik çizmektedir. Rekabetçi ve güçlü kalite politikamız müşteri yelpazemizi genişletmektedir. 2 Our reducer group carries out is works using simultaneous engineering methods in order to meet the demands of our customers by presenting several different product ranges. Promotion activities, product development programmes and computer supporting work show a continuously growing chart. Our competitive and strong quality policy is to develop our customer spectrum. www.pgr.com.tr TEKNİK BİLGİLER EXPLANATORY NOTES Teknik Açıklamalar Explanatory Notes Dişli Ünitesini Seçme Selecting of Gear Unit Bir dişli ünitesini seçerken PGR üç fazlı asenkron AC motorlarını veya tek fazlı AC motorları kullanılır ve teknik olarak kıyaslanabilen motorlar için de geçerlidir. Başka motorlar kullanırken, lütfen PGR’e danışınız. Bir dişli ünitesini seçme ile ilgili aşağıdaki önemli ana esaslara bağlı kalınmazsa, aşırı bir yük durumunun olması muhtemeldir. Bu durumda, tüm garantiler geçersizdir. Şüpheli durumda, lütfen dişli ünitesi tasarımını kontrol etmek için birlikte çalışabileceğiniz teknik bilgilerden sorumlu PGR satış ofisi ile irtibata geçiniz. Karşılıklı çıkarlarımız açısından, dişli ünitelerinde aşırı yüklemenin neden olduğu tüm problemler her durumda ,önlenmelidir. Gear unit selection includes PGR’s three-phase AC motor or single phase AC motor and technically equal different motor could be applied. When you apply different motor please contact with PGR. There are some condition for selecting gear unit and these condition must be considered overloading could be effected badly if restirictions are not considered.In these situation,all guarantees could be invalidated. Under suspecious situation please refer to PGR sales office department which is responsible for giving technical information to you. Kriter Conditions Seçme kriteri aşağıdakilerden oluşur: 1. Termal olarak transfer edilebilen güç (termal sınır) Conditions of selecting gear unit; 1. Thermal Limit Dişli ünitesinin aşırı ısınmaması için, bu güç transferi (3 saat) daha uzun bir çalışma zamanını aşmamalıdır. Aşağıdaki maddelerden iki veya daha fazlasının geçerli olması durumunda çalışma durumunu kontrol ediniz. Thermal transfer power should not be exceeded over running time (3 hours) for prevent overheated gear unit. Any suspicion please contact with PGR. .. .. .. Ortam sıcaklığı > 40°C Dönme hızı n1 > 1500 min-1 Motor gücü P1 > 100 kW W kovanlı ve IEC adaptörlü redüktörler Dik olarak montajı yapılan redüktörler ( sayfa 30-35 ) Tahvil oranı itop< 20 (Polat konik dişlili için itop< 40) .. .. .. Ambient temperature > 40°C Rotational speed n1 > 1500 min-1 Input power P1 > 100 kW With W-cylinder and IEC adapter gear units Vertical mounting position ( see page 30-34 ) Reduction ratio itop< 20 (for helical-bevel gear units itop< 40) 2. Mekanik olarak transfer edilebilen güç “P” Bu güç, katalogdaki ilgili tablodaki servis faktörü f B tarafından göz önüne alınır. Bir sonraki bölüm, gerekli servis faktörünün saptanmasını tanımlar. 2. Power transfer with service factor “P” Service factor (f B) is important for power transfer, determination of minium service factor will be given at following information. Genel olarak, dişli ünitesi ekleme, ısı radyasyonu, dar yer vs gibi özel montaj koşulIarı olduğunda bize danışınız. Özel ölçüler (veya su soğutucusu) termal aşırı yüküne karşı var olduğunda; lütfen PGR’e danışınız. For every operating conditions; eg. heat radiation in bounded field (place) which is required special devices (oil cooler or water cooler) for that reason please contact with PGR. Giriş gücü ve servis faktörü Input power and service factor Her bir uygulama için gerekli giriş gücü, hesaplama ile saptanır. Motor anma gücü (P1) , bu giriş gücünden sonra seçilir. Normal olarak, belirli uygulama özel çalıştırma koşullarına ait güvenlik faktörleri gözleneceği ve anma motor çıkış seviyeleri genellikle standart çıkış seviyesi aralığında olduğu için motorun anma gücü istenilen güçten biraz daha yüksektir. For every application requiring input power could be detected or determined by calculation. After determination input power, rated motor power (P 1) is defined. Motor power is greater than require input power due to safety factor is used according to operating conditions. Montajı yapılacak 3 fazlı bir AC motorun anma gücünü seçerken kısa dönem ve seyrek tork tesirini göz önüne almak gerekmez. Bir frekans inventörü üzerindeki 3 fazlı bir AC motor çalıştırırken ilave faktörler anma çıkış gücünün seçimini etkiler. Motorun aksine, kısa dönem ve seyrek tork tesiri önemli derecede dişli ünitesinin seçimini etkiler. Dişli ünitesi servis faktörü f B bu kısa dönem ve seyrek tork tesirini ve ayrıca yeterli doğrulukla dişli ünitesi üzerinde etkileri göz önüne alır. Selecting a motor type is important for right calculation for instance; three phase AC motor which is mounted to gear unit, affecting infrequent torque could not be considered but if you mount three-phase AC motor on frequency inverter latest available factor effects the output power. Besides of motor type short and infrequent torque impression effects selecting gear unit for that service factor is considered. 4.sayfadaki diyagram 1 çalışma saatine veya güne bağlı olarak yük sınıflandırması, devir ve minimum servis faktörü arasındaki ilişkiyi sunmaktadır. Diagram 1 which is shown on page 4, presents relation between types of load, revolution per hour and minimum service factor depend on operation hours or day. www.pgr.com.tr 3 SERVİS FAKTÖRÜ SERVICE FACTOR Diyagram - 1 Operasyon saat / gün Yük Tipleri Operation hours / day Types of Load 24 16 8 4 H 1.7 1.5 1.9 1.8 1.8 1.7 1.6 1.4 Servis Faktörü fB Service Factor f B 1.5 1.6 1.7 1.4 1.3 M 1.2 1.5 1.3 1.1 1.6 1.4 1.5 1.3 1.4 1.2 1.2 1.1 1.0 U 1.0 0.9 0.8 1.3 1.1 0.9 0.7 0 200 100 400 300 600 500 800 700 1000 900 1200 1100 1400 1300 1500 Devir / Saat (1 / h) Revolution per Hours Diyagram 1, günlük çalışma zamanına bağlı gerekli minimum servis faktörü f B min, ‘Z’ saatteki çevrimleri, ve uygulama yükü sınıflandırması ‘U’, ‘M’, ‘H’ gösterir. Çalışma düzgünlüğüne ve kütle hız faktörüne bağlı olarak, üç yük sınıflandırması belirlenmiştir. Hareket ettiren makineden gelen etkiler çalışma düzgünlüğü sınıflandırmasında tanımlanırken, kütle hız faktörü en fazla olan yük üzerinde etkili olur. Diagram 1 shows requiring minimum service factor depend on revolution per hours ‘Z’ and types of load ‘U’, ‘M’ or ‘H’. In following information mass acceleration factor will be explained how it effects to or relation between load classification.Forces or loads which are applied from driven machin to gear unit while determine load classification, mass acceleration factor is played important role on the high load classification which is designated with ‘H’ sign. Not : Elde edilen servis faktörü f B kullanılan sürücü (tahrik) tipine göre “k” katsayısı ile çarpılır. Note : Service factor f B which is acquired from diagram should be modified with factor “k” that, depends on driver type. k=1 ; elektrik motoru veya hidromotor, k = 1.25 ; çok silindirli içten yanmalı motor, k = 1.50 ; tek silindirli içten yanmalı motor 4 k=1 ; hydraulic motor and electrical motor k = 1.25 ; multi-cylinder engine k = 1.50 ; single-cylinder engine www.pgr.com.tr TEKNİK BİLGİLER EXPLANATORY NOTES Selecting a Gear Unit Dişli Ünitesini Seçme Operation classification; Bir çalışmanın sınıflandırılması : a) Düzgün çalışma (U) Küçük karıştırıcılar, asansörler, konveyörler, montaj bantları, doldurma makinaları, bantlı konveyörler, temizleme makinaları, fanlar, test makinaları. a) Uniform application (U) Small agitators, elevators, conveyors, assembly belts, filling machines, conveyor belts, cleaning machines, fans, testing machines. b) Yumuşak şoklar, düzgün olmayan çalışma (M) b) Moderate shocks, non-uniform application (M) Ağır konveyör bantları, değirmenler, ahır gübre makinaları, vinç hareketli mekanizmalar, bükme makinaları, çimento karıştırıcılar, dişli makinaları, ahşap işleme makinaları için sürücüler, vinçler, kayar kapılar, dengeleme makinaları. Heavy conveyors belts, mills, stall dunging machines, crane traveling mechanisms, bending machines, cement mixers, gear pumps, decoilers, tapping units, packaging machines, feed drives for wood processing machines, hoists, winches sliding doors, balancing machines. c) Ağır şoklar, aşırı düzgün olmayan çalışma (H) c) Heavy shocks, extreme non-uniform application (H) Taş kırıcılar, eksantrik presler, doğrayıcılar, presler, taşlama milleri, çekiçli kırıcılar, kağıt öğütücüler, ağır karıştırıcılar, delme makinaları, katlama makinaları, dönen tezgahlar, yatay karıştırıcılar, kesiciler, vibratörler, santrifüj makinaları, döner tablalar. Stone crusher, eccentric presses, choppers, presses, grinding mills, hammer mills, shredders, heavy mixers, punching machines, folding machines, rolling stands, tumbling barrels, shears, vibrators, centrifuges, roller tables. Yük sınıflandırması, çalışma düzgünlüğünden ve aşağıdaki tabloya göre kütle hız faktörü ‘ maf ‘ den belirlenir. Burada, çalışma veya kütle hız faktöründen gelen daha yüksek sınıf yük sınıflandırmasında geçerlidir. ( Örnek: aşırı düzgün olmayan çalışma ve maf = 2,8 gibi durumda yük sınıfı ‘M’ olarak belirlenir. Load classification is obtained from operation class and mass acceleration factor (maf). For this reason in any situation which factor is greater than other you must take for calculation. (Eg; heavy - shock and m af = 2,8 load classification must be ‘M’) Yük Sınıfı U M H Çalışma Düzgün çalışma Düzgün olmayan çalışma Aşırı düzgün olmayan çalışma Load Classification Kütle hız faktörü maf ≤ 0.25 0.25 < maf ≤ 3 U M H 3 < maf ≤ 10 maf = J Jex.red = ex x ( Jmot Jmot İ ges = Toplam dişli ünitesi oranı Jex.red = Hareket motoru üzerindeki azaltılmış tüm dış kütle atalet momenti Jex = Tüm dış kütle atalet momenti Jmot = Motorun kütle atalet momenti Operation Mass Acceleration Factor Uniform application maf ≤ 0.25 Non-uniform application 0.25 < maf ≤ 3 Extreme non-uniform application 3 < maf ≤ 10 2 1 ) İges İ ges = Total gear unit ratio Jex.red = All external mass moment of inertia on the drive motor, reduced Jex = All external mass moment of inertia Jmot = Mass moment of inertia of the motors Kütle hız faktörü maf , çıkış tarafındaki dış kütleler ile giriş tarafındaki yüksek hız kütlelerin arasındaki ilişkiyi gösterir. Kütle hız faktörü, başlatma ve frenleme işlemlerine ve titreşime göre dişli ünitesindeki tork tesir seviyesini önemli derecede etkiler. Örneğin; bantlı konveyör sistemlerinde dış kütle atalet momenti taşınan ürün kadar yük uygular. m af > 10 ise, transfer elemanlarında büyük bir oynama, yük sınıflamasında belirsizlik varsa veya şüphedeyseniz, PGR'e danışınız. Technically mass acceleration factor m af mass different between external output-side and high speed input-side. maf is played important role at the level of torque propulsive in the gear unit. It is mostly effected at start-up, braking operation and vibration. Please contact with PGR where maf is greater than 10 and large play in transfer elements and vibration in the system. Servis faktörü f B , maksimum dişli ünitesi çıkış momenti M amax ile montajlanmış motor gücü P1 , çıkış hızı n 2 ve dişli ünitesi verimi (η) sonucu ortaya çıkan momenti M a arasındaki ilişkidir. Calculation of service factor is illuminated below. It depends on maximum output moment of gear unit and the output moment which is calculated from motor power, rotation speed and efficiency. www.pgr.com.tr 5 TEKNİK BİLGİLER EXPLANATORY NOTES Dişli Ünitesini Seçme Selecting a Gear Unit Helisel - Sonsuz Dişli Üniteleri İçin Seçim Bilgileri Selection Information For Helical-Worm Gear Unit Helisel-sonsuz dişlili tasarımları için, çok sayıdaki kalkışlarda (oto-blokaj olasılığının azalması) çıkış torkunun geriye dönüşte etki etmesi ya da yüksek atalet momentinin oluşabileceği göz önünde bulundurulmalıdır. Sonsuz dişli sayıları Z2 / Z1 IEC seçim tablolarında listelenmiştir. For more start-stop applications ( reducing possibility of autoirriversibility) you must consider the effecting of the output torque to anti rotation or occuring high moment of inertia in design of helical-worm gear units. Number of Teeth number of worm gear Z 1 ,of gear units with IEC adapters are listed in performance tables. maf ≤ 0.25 all number is possible maf ≤ 3 number of worm teeth Z1 3 önerilir. maf ≤ 10 number of worm teeth Z1 6 önerilir. In selection of helical-worm gear units additional f B1 service factor which is depend on ambient temperature and f B2 service factor which is depend on cycle and calculated according to ED are considered. f B1 and f B2 service factors can be found from diagram 2 and 3. maf ≤ 0.25 tüm sonsuz dişli sayısı mümkündür. maf ≤ 3 sonsuz dişli sayısı Z1 3 önerilir. maf ≤ 10 sonsuz dişli sayısı Z1 6 önerilir. Sonsuz dişli ünitelerinde diyagram 1’den bulunan f Bmin servis faktörüne ek olarak TU dış ortam sıcaklığı için fB1 servis faktörü ve devamlılık süresi faktörüne göre ED için fB2 servis gözönünde bulundurulmalıdır. f B1 ve f B2 servis faktörleri diyagram 2 ve 3’ten bulunabilir. Doğru bir dişli ünitesi seçiminde, tablolardan alınan servis faktörü aynı f Bmin , f B1 ve f B2 servis faktörlerinden büyük olmalıdır. For the right selection, service factor which is taken from performance table must be gearther than f Bmin ,f B1 and f B2 service factors which are taken from diagram 1,2,3. f Bmin . f B1 . f B2 fB Power for helical-worm gear with W cylinder is calculated as follows. W kovanlı helisel-sonsuz dişli üniteleri için güç aşağıdaki formüle göre hesaplanır. P1 = M amax. n2 9550 . f Bmin . f B1 . f B2 . η , [ kW ] M amax [Nm] n2 [ min-1] In this section P1 value must be less than P1max value. P1 ≤ P1max Burada maksimum sürücü gücü P1max değerini geçmemelidir. P1 ≤ P1max For all output speed, maximum output torque [Mamax ] maximum motor power (P1max ) and efficieny of gear units are listed on performance tables of gear unit with W and IEC adapter. Efficiency of gear units must be included factor which is obtained from equation on above. W ve IEC’li performans tablolarında her bir çıkış devri (n 2 ) için maksimum çıkış torku (Mamax ), maksimum motor gücü (P1max ) ve dişli ünitesi verimi listelenmiştir. Dişli ünitesi verimi (η) yukarıdaki formüle göre çıkan faktörü içermelidir. Example ; 0,9 = %90 Örneğin ; 0,9 = %90 Helisel-sonsuz dişli ünitelerinde servis faktörü (f B1 ) hesabına etki eden dış ortam sıcaklığına göre ve çalışma çevriminden dolayı gelecek servis faktörleri (f B2 ) gözönünde bulundurulmalıdır. f B1 service factor according to ambient temperature and f B2 service factor according to running cycle which are effected to the calculation of service factor must be considered in helical-worm gear units. Diyagram-2 1,4 f B1 A 1,3 B 1,2 C 1,1 1,0 0 10 20 30 40 50 TU [°C] Diyagram-3 1,0 0,9 f B2 0,8 ED(%)= tB . 100 60 0,7 0,6 0 20 40 60 80 100 ED [%] 6 www.pgr.com.tr TEKNİK BİLGİLER EXPLANATORY NOTES Verim (η) : Efficiency (η) : PSH helisel-sonsuz dişli üniteleri verimde maksimum %92’ye ulaşabilir. Helical-worm gear units (PSH) can be reached maximum 92% per cent efficiency. Sonsuz dişlilerin maksimum verimliliğe ulaşabilmeleri için dişlilerin birbirine alışması gerekmektedir. Bundan dolayı dişli ünitesi verimi, sonsuz redüktör yeni olduğunda düşük olacaktır. Helisel - sonsuz dişli ünitesinin az sayıdaki kalkışlarında bu etki maksimumdur ama doğrusal açı ile azalır. Tecrübelere göre tam çalışma tamamlanmadan önce aşağıda verilen verim düşüşleri göz önünde bulundurulmalıdır. For reaching maximum efficiency of worm gears, gears must be run together. For that reason efficiency of gear units will be low in first running. At low start-stop applications this affect will be maximum but it could be decrease with linearly. According to experience, before full running incompletely decreasing in efficiency which is specified on below must be considered. Helisel - Sonsuz Çalışması Verimdeki Düşüş 1. Çalışma 2. Çalışma 3. Çalışma 6. Çalışma % 12 % 6 % 3 % 2 Running of Helical-Worm Gear 1 st Running nd 2 Running rd 3 Running th 6 Running Decreasing in Efficiency % 12 % 6 % 3 % 2 Sonsuz dişlideki diş sayıları, IEC seçim tablolarında listelenmiştir. Alıştırma prosedürü maksimum yükte yaklaşık 25 saat çalıştırıldıktan sonra tamamlanmış olur. Teeth number of worm gear, reduction ratio and output speed are listed on the performance tables. Procedure of running together is accomplished after 25 hours running with maximum load. Tablolarda verilen verim değerlerine ulaşabilmek için aşağıdaki bilgiler göz önünde bulundurulmalıdır. For each efficiency value on the performance tables, you must consider as follows instruction; - Dişli ünitesi devamlı çalıştırılmalı, - Dişli ünitesi sabit sıcaklığa ulaşmış olmalı, - Gerekli yağlayıcı ile doldurulmuş olmalı, - Gear units must be run full, - Gear units must be reach constant temperature, - It must be filled suitable lubrication, Radyal ve Eksenel Kuvvetler Axial and Radial Forces Çıkış momenti ve hız genel açıklamalarındaki tablolarda, çıkış mili üzerine izin verilen radyal kuvvetler FR ve eksenel kuvvetler FA listelenmiştir. Tercihen güçlendirilmiş çıkış mili yatakları bir çok dişli ünitesi tipi için geçerlidir. Güçlendirilmiş yataklardaki radyal ve eksenel kuvvetler tablolarda F R GR ve FA GR olarak belirtilmiştir. Listelenen radyal ve eksenel kuvvetler, mil çıkışlı, ayak ve flanş bağlantılı dişli üniteleri için uygulanır. Radyal ve eksenel kuvvetler, bu kuvvetlerden biri 0 (sıfır)’a eşit iken hesaplanmıştır. Permissible forces on the output shaft are given at the selection of gear motor. FR represents radial load and FA represents axial load. FA GR and F R GR represents permissible load with reinforced bearings. This values are calculated when one of them is equal to zero. Ayrıca, radyal ve eksenel kuvvetlere ait bir servis faktörü f B = 1 çıkış gücü ve devir açıklamalı genel tablolarda verilen kuvvetlerin temeline dayanır. Darbeli tipli kuvvetlerin olduğu ve aşırı çalışmalı ( > 8 saat/gün ) uygulamalarda uygun servis faktörü f B > 1 radyal ve eksenel kuvvetler için de gözönünde bulundurulmalıdır. İzin verilen kuvvetler FA ve FR belirli oranda azaltılır. In selection of gear motor tables service factor is given with permissible axial and radial load but it must be considered when operating times is greater than 8 hours and service factor must be greater than 1 for that reason permissible radial and axial loads are reduced. Listelenen radyal kuvvetler, milin ucunun orta kısmında etki eden bir kuvvete karşılık gelir. İzin verilen kuvvetleri saptarken, uygulanan kuvvetin hiç istenmeyen yönü ve dönme yönü varsayıldı.Tam bir hesaplama için, daha yüksek radyal ve eksenel kuvvetler muhtemeldir. Bu yüzden lütfen bize istenen servis süresinin yanısıra gerçek güç ve dönme yönünün detaylarını da belirtiniz. Axial and radial forces are calculated where force acting on the middle of the shaft end see page 39. Direction of rotation is played important role in calculation. For that r eason this forces are calculated and result’s value is found from forces to the shaft worse. Hence, please explain details in your orders. Transfer elemanları, çıkış miline eklenirse, ilgili faktör f z radyal kuvveti saptamada göz önüne alınmalıdır. For belt-pulleys operations or any other motion transfer applications f z factor must be considered while calculating radial and axial load. www.pgr.com.tr 7 TEKNİK BİLGİLER EXPLANATORY NOTES fz için Tablo fz values are shown at table. Faktör fz Açıklama Transfer Elements Dişliler Zincir Dişliler Zincir Dişliler 1.1 1.4 1.2 z ≤ 17 diş z ≤ 13 diş z ≤ 20 diş Gears Sprockets Sprockets 1.1 1.4 1.2 z ≤ 17 diş z ≤ 13 diş z ≤ 20 diş Dar V-Kayış Makaralar Düz kayış Makaralar 1.7 2.5 ön gerilim kuvveti Narrow V-belt pulleys Flat belt pulleys 1.7 2.5 by Pre-Tensioning Transfer Elemanları Notice Radial load is determined with following equation; Mil üzerinde ortaya çıkan radyal kuvvet, aşağıdaki formül kullanılarak hesaplanmıştır. FRvorth = Factor fz 2 . M2 fz ≤ FR do M2 fZ d0 FR : Dişli ünitesi çıkış momenti [Nm] : Tablodan alınan katsayı : Etkili daire çapı [mm] : Devir ve çıkış gücü tablolarından alınan müsaade edilebilir radyal kuvvet [kN] FR vorth : Mil üzerindeki radyal kuvvet [kN] M2 fZ d0 FR : Output torque of gear unit [Nm] : Factor which is taken from table : Effective circular diameter [mm] : Permitted radial forcewhich is taken from the speed and output moment tables. [kN] FR vorth : Radial force on the gear unit shaft [kN] Equation which is determined above is used for when force is not acting on the middle of shaft at other situations following equation is applied. Kuvvet mil ortasına uygulanmazsa, herhangi bir ‘X’ noktasında izin verilen radyal kuvvet formül I ve II kullanılarak hesaplanır. Formül / Equation - I FRXL = FR . z y+x Formül / Equation - II FRXW = X mil bileziğinden kuvvet uygulama noktasına olan uzaklık [ mm ] X Noktası - mil kararlılığı X FRXW izin verilen radyal yük [ kN ] FRXW permitted overhung force [ kN ] FR hız ve çıkış tabloları ve milin ortasına uygulanan kuvvetten alınan radyal kuvvet [ kN ] X Noktası - yatak servis ömrü FR FRXL izin verilen radyal yük [ kN ] FRXL permitted overhung load [ kN ] c [Nmm] CGR [Nmm] f 10-11 distance from the shaft collar to the point of force application [ mm ] point X - shaft stability overhung force from the speed and output tables, force applied at shaft middle [ kN ] point X - bearing service life [mm] y [mm] z [mm] Belirtilmedir ki, hesaplamalarda formül I yatak servis ömrünü, formül II ise mil kararlılığını hesaplamada kullanılır. Hesaplamalar sonucunda küçük değer dikkate alınmalıdır. 8 c (f + x) .1000 Notify that, equation I and equation II are applied for calculating radial load where equation I is used for service life and equation II is used for shaft stability. But small result must be considered. www.pgr.com.tr RADYAL YÜK HESABI CALCULATION OF RADIAL LOADS D F RADYAL YÜKLERİN HESABI CALCULATION OF OVERHUNG LOADS Radyal yük FR (N)' nun hesaplanmasında gerekli tahrik momenti M2 (Nm), kasnak veya dişli çapı D (mm) olmak üzere aşağıdaki formüller kullanılır. Radial load FR (N)is calculated with the following equations where required moment M2 (Nm) and hoop or gear diameter D (mm) is used. 1 - Elastik Kaplin 1 - Elastik Coupling Çalışma sırasında oluşan sapmalar kaplinin güvenlik sınırları içerisinde ise kuvvetler ihmal edilebilir. If elastic coupling is working in its reliable working area, the overhung loads can be neglected. 2 - Düz Dişli ( 20° kavrama açılı ) 2 - For Spur Gear ( Pressure angle 20°) FR 3 - Küçük Hızlarda Zincir Dişli = 2100 x M2 D 3 - For Chain Drive With Low Speed ( Z < 17 ) ( Z < 17 ) FR = 2100 x M2 D 4 - Triger Kayış 4 - For Trigger Belt FR = 2500 x M2 D 5 - V Kayış 5 - For V Belt FR = 5000 x M2 D 6 - Gerdirme Makaralı Kayış 6 - Flat Belt With Spanning Puley FR www.pgr.com.tr = 5000 x M2 D 9 RADYAL YÜK HESABI CALCULATION OF RADIAL LOADS FR Ød x FA I ÇIKIŞ ŞAFTINDAKİ RADYAL VE EKSENEL YÜK HESAPLAMALARI İÇİN DEĞERLER VALUE TABLE FOR RADIAL AND AXIAL LOADS AT OUTPUT SHAFT Redüktör Tipi y z Gearbox Type (mm) (mm) PSH 2040 115.5 (Nmm) (Nmm) 6 0.07 X 10 6 PSH 2050, PSH 3050 104.0 129.0 0.12 X 10 PSH 2063, PSH 3063 118.5 148.5 0.19 X 10 PSH 2080, PSH 3080 150.0 185.0 0.21 X 10 6 6 6 PSH 2100, PSH 3100 179.0 224.0 0.51 X 10 PSH 2125, PSH 3125 233.5 293.5 1.33 X 10 y-z-c-CGR 10 99.5 CGR Güçlendirilmiş Reinforced c Normal Normal 6 6 0.19 X 10 6 0.30 X 10 6 0.41 X 10 6 0.94 X 10 6 2.19 X 10 f d I (mm) (mm) (mm) 0 20 40 0 25 50 0 30 60 0 35 70 0 45 90 0 60 120 8 www.pgr.com.tr RADYAL YÜK HESABI CALCULATION OF RADIAL LOADS W FR1 Ød1 x I GİRİŞ ŞAFTINDAKİ RADYAL VE EKSENEL YÜK HESAPLAMALARI İÇİN DEĞERLER VALUE TABLE FOR RADIAL AND AXIAL LOADS AT INPUT SHAFT f=0 y z c d1 I (mm) (mm) (Nmm) (mm) (mm) PSH 2040 58.5 78.5 0.037 x 10 16 40 PSH 2050 PSH 2063 PSH 2080 PSH 3050 PSH 3063 PSH 3080 PSH 3100 70.0 90.0 3.64 x 10 16 40 PSH 2100 PSH 3125 96.5 121.5 1.07 x 10 24 50 PSH 2125 110.5 150.5 4.70 x 10 38 80 Redüktör Tipi Gearbox Type y-z-c www.pgr.com.tr 6 4 5 5 8 11 RADYAL YÜK HESABI CALCULATION OF RADIAL LOADS W FR1 FA1 Tip Type 12 PSH 2040 PSH 2050 PSH 2063 PSH 2080 PSH 3050 PSH 3063 PSH 3080 PSH 3100 [ kN ] [ kN ] PSH 2100 PSH 3125 PSH 2125 [ kN ] [ kN ] [ kN ] [ kN ] [ kN ] [ kN ] P1 (kW) FA1 FR1 FA1 FR1 FA1 FR1 FA1 FR1 0.12 0.18 0.25 0.37 0.55 0.75 1.10 1.50 2.20 3.00 4.00 5.50 7.50 9.20 11.0 1.2 1.1 1.0 0.89 0.77 0.58 0.35 0.29 0.20 0.15 - 0.85 0.82 0.78 0.75 0.72 0.70 0.61 0.43 0.42 0.23 - 1.2 1.1 1.0 0.89 0.77 0.58 0.35 0.29 0.20 0.15 - 0.85 0.82 0.78 0.75 0.72 0.70 0.61 0.43 0.42 0.23 - 2.9 2.9 2.8 2.6 2.5 2.3 2.1 2.0 1.7 1.5 0.98 0.65 0.27 - 2.1 2.1 2.1 2.1 2.0 1.9 1.8 1.8 1.7 1.6 1.1 1.0 1.0 - 4.1 3.9 3.8 3.5 3.3 2.7 2.5 2.3 1.6 1.4 1.0 0.59 2.1 2.8 2.4 2.7 2.6 2.4 2.3 2.1 1.8 1.3 0.98 0.47 FA1 FR1= 0 FR1 FA1 = 0 8 www.pgr.com.tr KISALTMALAR ABBREVIATIONS = Servis Faktörü (Mamax / Ma) f F A = Çıkış tarafındaki müsaade edilebilir eksenel yük [ kN ] F A = Permissible axial load at the output side [ kN ] F R = Çıkış tarafındaki, milin orta noktasına etkiyen müsaade edilebilir radyal yük [ kN ] F R = Permissible overhung load at the output side, force acting at the shaft's midpoint [ kN ] i total = Gear units total ratio ges = Reduction ratio f i B toplam = Dişli ünitesindeki toplam tahvil oranı i ges M2 B = Tahvil oranı i = Çıkış momenti [Nm] M2 = Service factor (Mamax / Ma) = Output torque [Nm] Mamax = Müsaade edilebilir maksimum çıkış momenti [Nm] Mamax = Max. permissible output torque [Nm] n2 = Çıkış devri [ d/dk ] n2 = Output speed [ min ] Pe = Mamax referans alınarak hesaplanan güç [kW] Pe = Calculated power [kW] with reference to Mamax Pn = Motor güç oranı [kW] Pn = Rated power of motor [kW] η = Verim [ % ] η = Efficiency [ % ] kg = Redüktörün ağırlığı kg = Weight of the geared motor www.pgr.com.tr -1 13 PSH TANITIMI DESCRİPTİON OF PSH POLAT HELİSEL-SONSUZ DİŞLİ ÜNİTESİ (PSH) POLAT HELICAL-WORM GEAR UNIT (PSH) Helisel - sonsuz dişli üniteleri motor mili ile çıkış şaftı arasında 90° açı olan dişli üniteleridir. Bu yüzden uygulamalarda (sistem) faydalı özellik sağlar. Bu katalogta belirtilen tüm helisel - sonsuz dişli üniteleri çok kademelidir. There is a 90° between motor shaft and output shaft in helical-worm gear units. For that reason this features provide more benefits in applications (in system). All helical-worm gear units in this catalogue have multi-stage reduction. Helisel - sonsuz dişli ünitelerinin helisel dişlileri yüksek alaşımlı çelikten yapılmış olup, dişliler sertleştirilmiştir. Dişli geometrileri ve düzeltmeleri optimize edilerek tek gövde prensibine göre hassas şaft hizalaması, yüksek yük kapasitesi, uzun servis ömrü ve düşük ses sağlanmış olur. Helical gears of helical-worm gear units are machined from high alloy steels and case hardened. According to monoblock principle and optimizing the teeth geometries, precise shaft alignment,high load capacity, long service life and low noise are provided. Sonsuz kademedeki çark sertleştirilmiş olduğu gibi özel bronzdan yapılmış ve şaft üzerine sıkıca sabitlenmiştir. Bu kombinasyon uzun servis ömrünü garanti etmektedir. Modern CNC tezgahlarında üretilen helisel-sonsuz dişli üniteleri düzenli proses kontrolü yapılarak en yüksek ürün kalitesi, siz değerli müşterilerimize sunulur. In worm reduction, worm wheel is special bronz material and heat treated at the same time it is fixed to the output shaft. This combination is guaranteed long service life. Helical-worm gear units which are machined in latest version of CNC tools and allways checked regularly in process control, are offered to you with high quality level. Helisel - sonsuz dişli üniteleri ömürleri için fabrikada yüksek kalitede poliglikol tabanlı sentetik uzun ömür yağı ile doldurulur. Bu sentetik yağ sürtünmeyi düşürerek uzun servis ömrü ve yüksek verim sağlamış olur. For long service life of helical-worm gear units, gearboxes are filled with high quality synthetic oil which have polyglicol base. This synthetic oil is decreased friction effect and provided long service life, high efficiency. Helisel-sonsuz dişli ünitelerinden PSH 2040’dan PSH 2125’ e kadar iki kademe olarak mevcuttur. Bu ünitelere yüksek tahvil oranları için indirgeyici gövde montajlanarak 3 kademeli sunulmaktadır. Bunlar ise PSH 3050’den PSH 3125’e kadar toplam 5 gövde büyüklüğünde sağlanmaktadır. In helical-worm gear units, from PSH 2040 to PSH 2125 is two stage reduction. For high reduction ratio three-stage reduction is offered when reduction case is mounted to the two stage reduction gear units. These are PSH 3050 to PSH 3125 and offered totaly in 5 case width. Helisel - Sonsuz Dişli Üniteleri Helical-Worm Gear Units Çıkış gücü 0,12 kW’dan 15 kW’a kadar maksimum çıkış momenti 3570 Nm, 6 gövde büyüklüğü Approx. 3570 Nm output moment altering power from 0.12 kW to 15 kW P1 : 0,12 kW .........15 kW M2 : 3 ............ 3570 Nm P1 : 0,12 kW .........15 kW M2 : 3 ............ 3570 Nm MAX. MÜSAADE EDİLEBİLİR ÇIKIŞ MOMENTİ Ma max. MAX. PERMISSIBLE OUTPUT TORQUES Ma max. 85-105 İki ve Üç kademeli helisel-sonsuz redüktör Helical-worm gear units, double and triple stage reduction Tip/Type 14 Ma max. (Nm) Tip/Type Ma max. (Nm) PSH 2040 100 PSH 2050 185 PSH 3050 195 PSH 2063 360 PSH 3063 380 PSH 2080 710 PSH 3080 770 PSH 2100 1420 PSH 3100 1590 PSH 2125 2850 PSH 3125 3090 www.pgr.com.tr W ve IEC ADAPTÖR KULLANIMI USING OF W AND IEC ADAPTER W ve IEC Adaptör W and IEC Adapter for Gear Units W kovanlı redüktörlerin max. tahrik gücü geçerli olan çıkış devri ve tahvil oranına göre tablolarda verilmiştir. (Bknz 85-105) IEC adaptörlü dişli ünitelerinde, her gövde büyüklüğünün standart gücü DIN EN 50347’ ye göre verilir. P1 değeri W ve IEC seçim sayfalarında listelenmiştir. Bu listedeki değerlerden fazla bir güç istenirse özel hesaplamalar gerekmektedir. Lütfen danışınız. Selection of W cylinder (with free input shaft) and IEC adapter are listed on page 85-105. Maximum power are given according to gear reduction ratio and output speed. Gear units with IEC adapter standard power is specified according to DIN EN 50347. For other power values which are not shown on table, must be required special calculation for operating safety limits.For these cases, please contact with PGR. Kaldırma, asansör ve bu gibi insan yaralanmalarına neden olabilecek çalışmalar için özel hesaplamalar gerekmektedir. Lütfen PGR’ ye danışınız. Direk motor montajlı redüktörle karşılaştırmak gerekirse IEC ilave mil kaplinine ve extra rulman yataklanmasına sahiptir. Direk motor montajına göre IEC bağlantılı redüktörlerde güç kayıpları daha fazladır. PGR olarak biz direk motor montajını öneririz. Bu size sadece teknik avantaj değil finansal olarak da avantaj sağlar. On the other hand for operations where accident could be caused personnel damage special calculation must be required, please consult us. Direct motor mounting has a lot of advantage according to mounting of IEC adapter. At gear units with IEC adapter has additional solid shaft coupling and bearing seats for that reason power losses are greater than direct motor mounting. Last but not least direct motor mounting could be provided more technical and financial advantage. www.pgr.com.tr 15 KULLANIM ALANLARI APPLICATION AREAS UYGULAMALAR APPLICATIONS KARIŞTIRICILAR AGITATORS (MIXERS) * Saf Sıvılar * Sıvılar ve Katılar * Değişken Yoğunluklu Sıvılar HAVALANDIRMA TERTİBATLARI * Santrifüj * Lob * Pervane MAYALAMA VE DAMITMA * Şişeleme Mekanizması * Mayalama Kazanları - Kesintisiz İş * Fırınlar, Ocaklar - Kesintisiz İş * Ezme, Karışım Kazanları - Kesintisiz İş * Ölçü Haznesi - Sık Sık Başlama TOPRAK İŞLEME MAKİNELERİ * Tuğla Presi * Briket Makinesi * Çamur Karma Makinesi KOMPRESÖRLER * Santrifüj * Lob * Çok Pistonlu * Tek Pistonlu KONVEYÖRLER - GENEL MAKSATLI * Üniform Yüklü * Üniform Yüklü Olmayan * Pistonlu veya Karıştırıcılı VİNÇLER * Kuru Havuz Ana Kaldırma vinci Yardımcı Vinç Direkli Vinç Döndürme İşi Çekme İşi * Endüstriyel İşi Ana Kaldırma Vinci ASANSÖRLER * Kova * Santrifuj Boşaltma * Yürüyen Merdiven * Taşıma, Nakliye * Yerçekimi Boşaltım KIRMA MAKİNELERİ * Taş ya da Maden 16 * Pure Liquids * Liquids and Solids * Liquids - Variable Density BLOWERS * Centrifugal * Lobe * Vane BREWING AND DISTILLING * Bottling Machinery * Brew Kettles - Continuous Duty * Cookers - Continuous Duty * Mash Tubs - Continuous Duty * Scale Hopper - Frequent Starts CLAY WORKING MACHINERY * Brick Press * Briquette Machine * Pug Mill COMPRESSORS * Centrifugal * Lobe * Reciprocating, Multi-Cylinder * Reciprocating, Single-Cylinder CONVEYORS - GENERAL PURPOSE * Uniformly Loaded or Fed * Not Uniformly fed * Reciprocating Or Shaker CRANES * Dry Dock Main Hoist Auxiliary Hoist Boom Hoist Slewing Drive Traction Drive * Industrial Duty Main Hoist ELEVATORS * Bucket * Centrifugal Discharge * Escalators * Freight * Gravity Discharge CRUSHER * Stone or Ore www.pgr.com.tr KULLANIM ALANLARI APPLICATION AREAS UYGULAMALAR APPLICATIONS TARAMA MAKİNELERİ DREDGES * Kablo Bobinleri * Konveyörler * Pompalar * İstifleme Makineleri * Vinçler EKSTRUDERLER * Genel * Plastikler Değişken Hızlı Tahrik Sabit Hızlı Tahrik *Kauçuk, Lastik Kesintisiz Vida İşlemleri Kesintili Vida İşlemleri FANLAR * Santrifüj * Yüksek Emişli * İndüklenmiş Çekiş * Endüstriyel ve Maden Ocağı BESLEME ÜNİTELERİ * Palet * Bant * Disk * Pistonlu * Vida GIDA ENDÜSTRİSİ * Hububat Fırını * Hamur Karıştırıcı * Kıyma Makinesi * Dilimleyici METAL İŞLEMELERİ * Çekme Makinesi Taşıma ve Ana Tahrik * Hammadde İticileri * Makaslar * Tel Çekme * Tel Sargı Makinesi * Salgı Tezgahı Geri Dönmesiz Tek Tahrik Grup Tahriki DÖNER İŞLEMELER * Küresel ve Çubuk Düz Halka Dişli Helisel Halka Dişli Doğrudan Bağlı * Çimento Fırını * Kurutucular ve Soğutucular www.pgr.com.tr * Cable Reels * Conveyors * Pumps * Stackers * Winches EXTRUDERS * General * Plastics Variable Speed Drive Fixed Speed Drive *Rubber Continuous Screw Operation Intermittent Screw Operation FANS * Centrifugal * Forced Draft * Induced Draft * Industrial and Mine FEEDERS * Apron * Belt * Disc * Reciprocating * Screw FOOD INDUSTRY * Cereal Cooker * Dough Mixer * Meat Grinder * Slicer METAL MILLS * Draw Bench Carriage and Main Drive * Slab Pushers * Shears * Wire Drawing * Wire Winding Machine * Runout Table Non-Reversing Individual Drives Group Drives MILLS (ROTARY TYPE) * Ball and Rod Spur Ring Gear Helical Ring Gear Direct Connected * Cement Kilns * Dryers and Coolers 17 KULLANIM ALANLARI APPLICATION AREAS UYGULAMALAR APPLICATIONS KERESTE ENDÜSTRİSİ LUMBER INDUSTRY * Kabuk Soyucular Besleme Tamburu Ana Tahrik * Konveyörler Brülör Ana Yük veya Ağır Yük Ana Kütük Hızar ve Taşıma Bandı Kalın Dilim Taşıma * Kesme Testereleri Zincir Sürükleme * İndirme Boşaltma Tamburları * Uzun Deste * Tomruk Çekme-Eğme * Kütük Döndürme Aygıtları * Sıralama Tablası * Taşıma Zincir Kreynyolu * Tabla Tahriki KAĞIT İŞLEMELERİ * Karıştırıcı * Saf çözeltiler İçin Karıştırıcı * Kabuk Soyma Tromelleri * Mekanik Kabuk Soyucu * Dövücü - Öğütücü * Düzleştirme Makinesi * Kalenderleme * Yüzey Pürüzlendirici * Çentik Besleyici * Kaplama Merdanesi * Konveyörler Çentik, Kabuk, Kimyasal Kalın Dilimler İçeren Kütükler * Kesici * Silindir Kalıpları * Kurutucu Kağıt Makinesi Konveyör Tip * Kabartmalı Basıcı * Ekstrüder * Kağıt Merdaneleri * Presler * Küspe Makinesi * Pompalar FİLTRELER * Havalı Yıkama * Döner - Taş veya Çakıl * Hareketli Su Girişi 18 * Barkers Spindle Feed Main Drive * Conveyors Burner Main or Heavy Duty Main Log Re-saw, Merry-Go-Round Slab Transfer * Cut-Off Saws Chain Drag * Debarking Drums * Long Deck * Log Hauls - Incline * Log Turning Devices * Sorting Table * Transfers Chain Causeway * Tray Drives PAPER MILLS * Agitator (Mixer) * Agitator for Pure Liquors * Barking Drums * Mechanical Barkers * Beater * Breaker Stack * Calender * Chipper * Chip Feeder * Coating Rolls * Conveyors Chip, Bark, Chemical Log (including Slab) * Cutter * Cylinder Molds * Dryer Paper Machine Conveyor Type * Embosser * Extruder * Paper Rolls * Presses * Pulper * Pumps SCREENS * Air Washing * Rotary - Stone or Gravel * Traveling Water Intake www.pgr.com.tr KULLANIM ALANLARI APPLICATION AREAS UYGULAMALAR APPLICATIONS PLASTİK ENDÜSTRİSİ İLK İŞLEMLER PLASTIC INDUSTRY PRIMARY PROCESSING * Yoğun İç Karıştırıcılar Harmanlayıcı Kesintisiz Karıştırıcı PLASTİK ENDÜSTRİSİ İKİNCİL İŞLEMLER * Hacim Kalıpçıları * Kaplama * Tabaka * Boru * Ön Plastikleştirme * Rot * Saç, Plaka * Borular POMPALAR * Santrifüj * Oranlama * Pistonlu Tek Tesirli - 3 veya daha fazla Silindir Çift Tesirli - 2 veya daha fazla Silindir * Döner Şanzuman Tipi Lob Pervane KAUÇUK - LASTİK ENDÜSTRİSİ * Yoğun İç Karıştırıcılar Harmanlayıcılar Kesintisiz Karıştırıcılar *Karıştırma İşlemi 2 Yumuşak Merdane 1 veya 2 Oluklu Merdane * Toplu İşleme - 2 Yumuşak Silindir * Kırıcı ve Isıtıcı - 2 Merdane, 1 Oluklu Merdane * Kırıcı - 2 Oluklu Merdane * Tutma, Besleme, Karıştırma İşlemi - 2 Merdane * Arıtıcı - 2 Merdane * Kalenderler ATIK SU BOŞALTIM EKİPMANLARI * Çubuklu Elek * Kimyasal Besleme Üniteleri * Su Boşaltma Eleği * Köpük Kesici * Yavaş veya Hızlı Karıştırıcılar * Tortu Toplayıcı * Koyulaştırıcı * Vakumlu Filtre www.pgr.com.tr * Intensive Internal Mixers Batch Mixers Continuous Mixers PLASTIC INDUSTRY SECONDARY PROCESSING * Blow Molders * Coating * Film * Pipe * Pre-Plasticizers * Rods * Sheet * Tubing PUMPS * Centrifugal * Proportioning * Reciprocating Single Acting - 3 or more cylinders Double Acting - 2 or more cylinders *Rotary Gear Type Lobe Vane RUBBER INDUSTRY * Intensive Internal Mixers Batch Mixers Continuous Mixers * Mixing Mill 2 Smooth Rolls 1 or 2 corrugated Rolls * Batch Drop Mill - 2 Smooth Rolls * Cracker Warmer-2 Rolls,1 Corr. Roll * Cracker - 2 Corrugated Rolls * Holding, Feed and Blend Mill - 2 Rolls * Refiner - 2 Rolls * Calenders SEWAGE DISPOSAI EQUIPMENT * Bar Screens * Chemical Feeders * Dewatering Screen * Scum Breaker * Slow or Rapid Mixers * Sludge Collector * Thickener * Vacuum Filter KOMPAKTÖRLER COMPACTORS ÇEKTİRMELER - YAVAŞ VE KUVVETLİ PULLERS - BARGE HAUL 19 KULLANIM ALANLARI APPLICATION AREAS UYGULAMALAR APPLICATIONS ŞEKER ENDÜSTRİSİ SUGAR INDUSTRY * Pancar Dilimleme Aleti * Kamış Bıçakları * Kırma Makineleri TEKSTİL ENDÜSTRİSİ * Harman Ölçer * Kalenderler * Şablonlar * Kuru Konserveler * Boyama Makinesi * Dokuma Tezgahları * Çamaşır Sıkma Makinesi - Merdane * Kaplama * Doldurma Makinesi * Haşıl Makinesi * Halat Yıkama Makinesi * Eğirme Makinesi * Germe Kurutma Makineleri * Yıkama Makineleri * Masura Sarıcısı 20 * Beet Slicer * Cane Knives * Crushers TEXTILE INDUSTRY * Batcher * Calenders * Cards * Dry Cans * Dyeing Machinery * Looms * Mangle * Napper * Pads * Siashers * Soapers * Spinners * Tenter Frames * Washers * Winders DAMPERLİ ARAÇLAR CAR DUMPERS ÇEKİCİ ARAÇLAR CAR PULLERS ARITICILAR CLARIFIERS KONSERVE DOLUM MAKİNELERİ CAN FILLING MACHINES www.pgr.com.tr KULLANILAN TERİMLER NOMENCLATURE REDÜKTÖR TİPİ REDÜKTÖR DİZAYNI GEAR TYPE GEAR DESIGN Ayak Montajlı Foot Mounted PSH 2040...PSH 2125 = PSH 3050...PSH 3125 = İki kademeli, Helisel Sonsuz Dişlili redüktör Double reduction, helicalworm gearboxes Üç kademeli, Helisel Sonsuz Dişlili redüktör Triple reduction, helicalworm gearboxes Gövdeden Montajlı Flange Mounted PSH 2040...PSH 2125 = PSH 3050...PSH 3125 = İki kademeli, Helisel Sonsuz Dişlili redüktör Double reduction, helicalworm gearboxes Üç kademeli, Helisel Sonsuz Dişlili redüktör Triple reduction, helicalworm gearboxes TMA = Ayak montajlı, Tek mil çıkışlı Foot mounted, Solid shaft ÇMA = Ayak montajlı, Çift mil çıkışlı, Foot mounted, Solid shaft on both sides DG/B14 = Gövdeden montajlı, Delik milli, B14 flanşlı Case mounted, Hollow shaft, Flange B14 DG/B5 = Gövdeden montajlı, Delik milli, B5 flanşlı Case mounted, Hollow shaft, Flange B5 DG/KS-B14 = Gövdeden montajlı, Delik milli, Konik sıktırmalı, B14 flanşlı Case mounted, Hollow shaft, Shrink disk connector, Flange B14 DG/TK = Gövdeden montajlı, Delik milli, Tork kollu Case mounted, Hollow shaft, Torque arm DG/Ç = Gövdeden montajlı, Delik milli, Çektirmeli Case mounted, Hollow shaft, Fixing element DG/Ç/KK = Gövdeden montajlı, Delik milli, Çektirmeli, Koruma Kapaklı Case mounted, Hollow shaft, Fixing element with cover DG/KS/KK = Gövdeden montajlı, Delik milli, Konik sıktırmalı, Koruma Kapaklı Case mounted, Hollow shaft, Shrink disk connector with cover TMG/B5 = Gövdeden montajlı, Tek mil çıkışlı, B5 flanşlı Case mounted, Solid shaft, Flange B5 Gövdeden Montajlı / B5 Flanşlı Case Mounted / Flange B5 PSH 2040...PSH 2125 = İki kademeli, Helisel Sonsuz Dişlili redüktör Double reduction, helicalworm gearboxes PSH 3050...PSH 3125 = Üç kademeli, Helisel Sonsuz Dişlili redüktör Triple reduction, helicalworm gearboxes www.pgr.com.tr 21 KULLANILAN TERİMLER NOMENCLATURE Giriş Aksamları Input Options IEC = DIN 42677' ye göre standart motorlar için aksamlar = For assembly with IEC standard motors acc. to DIN 42677 W = Motorsuz girişli redüktörler için aksam = With free input shaft T = Turbo kaplin = Turbo coupling Motor Motor Kutup Numarası Number of Poles Motor Seçenekleri Motor Options Üç fazlı motor Motor boyutu 63 - 315 2 = 2 Kutuplu = 2 - Poles BRE = Frenli = With brake Three phase motor Motor size 63 - 315 4 = 4 Kutuplu EF = Tek fazlı, fanlı = Separate fan, single phase 6 = 6 Kutuplu ZF 4 - 2 = 1:2 oranında hız değiştirici dahlander bağlantısı = Çift fazlı, fanlı = Separate fan, double phase DF = Pole changing 1:2 Dahlander connection = Üç fazlı, fanlı = Separate fan, three phase IG = Enkoderli = With encoder EExell = Patlamaya karşı güvenliği arttırılmış üç fazlı motor = Explosion proof three phase motor increased safety = 4 - Poles = 6 - Poles 8 - 2 = 1:4 oranında hız değiştirici ayrılmış sarmal dizilişli = Pole changing 1:4 Separate windings KK/FK= Debriyajlı = With clutches SR = Toza karşı korumalı fren = Brake dust - proof TF = Termistörlü = Thermistor RG Diğer kutup kombinasyonları talep karşısında karşılanacaktır Other pole combinations on request 22 = Korozyon korumalı frenli = Brake corrosion protected WU = Yumuşak kalkışlı rotor = Soft start rotor B = Geri dönmeye karşı kilitli = Backstop TW = Isıya duyarlı = Thermal trip HL = Manuel frenli motor = Brake motor with hand release www.pgr.com.tr PSH MODÜLER SİSTEMİ MODULAR SYSTEM OF PSH Elektrik Motoru (Frenli) Electric Motor (With Brake) Elektrik Motoru (Frensiz) Electric Motor (None Brake) Helisel Sonsuz, Delik Milli Redüktör Helical-Worm, Hollow Shaft Reducer Gövdeden Montajlı Case Mounted Elektrik Motoru (Frenli) Electric Motor (With Brake) 25 - 27 Helisel Dişlili İndirgeç Helical Reduction Gearcase Elektrik Motoru (Frensiz) Electric Motor (None Brake) Helisel Sonsuz, Mil Çıkışlı Redüktör Helical-Worm, Solid Shaft Reducer Ayak Montajlı Foot Mounted IEC Adaptörü IEC Adapter 25 - 27 W Kovanı Free Input Shaft www.pgr.com.tr W Kovanı Free Input Shaft Elektrik Motoru (Frenli) Electric Motor (With Brake) IEC Adaptörü IEC Adapter Elektrik Motoru (Frensiz) Electric Motor (None Brake) 23 MEVCUT DİZAYNLARA GENEL BAKIŞ OVERVIEW TO AVAILABLE DESIGNS Anlamı Meaning Kısaltmalar Abbrev DG/B5 Gövdeden montajlı, Delik milli, B5 flanşlı Case mounted, Hollow shaft, Flange B5 DG/B14 Gövdeden montajlı, Delik milli, B14 flanşlı Case mounted, Hollow shaft, Flange B14 DG/TK Gövdeden montajlı, Delik milli, Tork kollu Case mounted, Hollow shaft, Torque arm Ç Koruma kapaklı Cover as a touch guard IEC IEC adaptörü Adapter for mounting B5 IEC standard motors B WB KS TMG/B5 GR TMA W 24 Çektirme elementli Fixing elements for hollow shaft KK ÇMA Helisel Sonsuz Dişlili Redüktör Helical Worm Gear Units Ayak montajlı, Çift mil çıkışlı Foot mounted, Solid shaft on both sides Kilit Integrated backstop W kilidi Backstop in W adapter Konik sıktırma Hollow shaft with shrink disc Gövdeden montajlı, Tek mil çıkışlı, B5 flanşlı Case mounted, Solid shaft, Flange B5 Güçlendirilmiş rulman Reinforced bearing Ayak montajlı, Tek mil çıkışlı Foot mounted, Solid shaft W kovanı Free input shaft www.pgr.com.tr ÜRÜNLERİMİZ PRODUCTS PSH 2080...TMA- 80S/4A R L R L R L R Tek mil çıkışlı, Ayak montajlı, Helisel sonsuz dişlili, Motorlu redüktör Helical worm geared motor, Solid shaft, Food mounted, With motor PSH 2080...TMA - IEC 80 R Tek mil çıkışlı, Ayak montajlı, Helisel sonsuz dişlili, IEC Adaptörlü redüktör Helical worm geared motor, Solid shaft, Food mounted, With IEC adapter PSH 2080...TMA - W R Tek mil çıkışlı, Ayak montajlı, Helisel sonsuz dişlili, W kovanlı redüktör Helical worm geared motor, Solid shaft, Food mounted, With free input shaft PSH 2080...ÇMA - 80S/4A Çift mil çıkışlı, Ayak montajlı, Helisel sonsuz dişlili, Motorlu redüktör Helical worm geared motor, Solid shaft on both sides, Food mounted, With motor PSH 2080...ÇMA - IEC 80 Çift mil çıkışlı, Ayak montajlı, Helisel sonsuz dişlili, IEC adaptörlü redüktör Helical worm geared motor, Solid shaft on both sides, Food mounted, With IEC adapter PSH 2080...ÇMA - W Çift mil çıkışlı, Ayak montajlı, Helisel sonsuz dişlili, W kovanlı redüktör Helical worm geared motor, Solid shaft on both sides, Food mounted, With free input shaft PSH 2080...TMG/B5 - 80S/4A Tek mil çıkışlı, Gövdeden montajlı, B5 Flanşlı Helisel sonsuz dişlili, Motorlu redüktör Helical worm geared motor, Solid shaft, case mounted, Flange B5, With motor PSH 2080...TMG/B5 - IEC 80 Tek mil çıkışlı, Gövdeden montajlı, B5 Flanşlı Helisel sonsuz dişlili, IEC Adaptörlü Redüktör Helical worm geared motor, Solid shaft, case mounted, Flange B5, With IEC Adapter PSH 2080...TMG/B5 - W Tek mil çıkışlı, Gövdeden montajlı, B5 Flanşlı Helisel sonsuz dişlili, W kovanlı redüktör Helical worm geared motor, Solid shaft, case mounted, Flange B5, With free input shaft www.pgr.com.tr 25 ÜRÜNLERİMİZ PRODUCTS PSH 2080...DG/TK - 80S/4A R L R L R L R L R L R L R L R L R L R Delik milli, Gövdeden montajlı, Tork kollu Helisel sonsuz dişlili, Motorlu redüktör Helical worm geared motor, Hollow shaft, Case mounted, Torque arm, With motor R PSH 2080...DG/TK - IEC 80 Delik milli, Gövdeden montajlı, Tork kollu Helisel sonsuz dişlili, IEC adaptörlü redüktör Helical worm geared motor, Hollow shaft, Case mounted, Torque arm, With IEC adapter R PSH 2080...DG/TK - W Delik milli, Gövdeden montajlı, Tork kollu Helisel sonsuz dişlili, W kovanlı redüktör Helical worm geared motor, Hollow shaft, Case mounted, Torque arm, With free input shaft R PSH 2080...DG/KS - 80S/4A Delik milli, Gövdeden montajlı, Konik sıktırmalı Helisel sonsuz dişlili, Motorlu redüktör Helical worm geared motor, Hollow shaft, Case mounted, Shrink disc, With motor PSH 2080...DG/KS - IEC 80 R Delik milli, Gövdeden montajlı, Konik sıktırmalı Helisel sonsuz dişlili, IEC adaptörlü redüktör Helical worm geared motor, Hollow shaft, Case mounted, Shrink disc, With IEC adapter R PSH 2080...DG/KS - W Delik milli, Gövdeden montajlı, Konik sıktırmalı Helisel sonsuz dişlili, W kovanlı redüktör Helical worm geared motor, Hollow shaft, Case mounted, Shrink disc, With free input shaft PSH 2080...DG/Ç - 80S/4A R Delik milli, Gövdeden montajlı, Çektirme elementli Helisel sonsuz dişlili, Motorlu redüktör Helical worm geared motor, Hollow shaft, Case mounted, Fixing element, With motor PSH 2080...DG/Ç - IEC 80 R Delik milli, Gövdeden montajlı, Çektirme elementli Helisel sonsuz dişlili, IEC adaptörlü redüktör Helical worm geared motor, Hollow shaft, Case mounted, Fixing element, With IEC adaper PSH 2080...DG/Ç - W R Delik milli, Gövdeden montajlı, Çektirme elementli Helisel sonsuz dişlili, W kovanlı redüktör Helical worm geared motor, Hollow shaft, Case mounted, Fixing element, With free input shaft 26 www.pgr.com.tr ÜRÜNLERİMİZ PRODUCTS R PSH 2080...DG/Ç-KK - 80S/4A L R L R L R Delik milli, Gövdeden montajlı, Çektirme elementli, Koruma kapaklı, Helisel sonsuz dişlili, Motorlu redüktör Helical worm geared motor, Hollow shaft, Case mounted, Fixing element and cover, With motor R PSH 2080...DG/Ç-KK - IEC 80 Delik milli, Gövdeden montajlı, Çektirme elementli, Koruma kapaklı, Helisel sonsuz dişlili, IEC adaptörlü redüktör Helical worm geared motor, Hollow shaft, Case mounted, Fixing element and cover, With IEC adapter R PSH 2080...DG/Ç-KK - W Delik milli, Gövdeden montajlı, Çektirme elementli, Koruma kapaklı, Helisel sonsuz dişlili, W kovanlı redüktör Helical worm geared motor, Hollow shaft, Case mounted, Fixing element and cover, With free input shaft PSH 2080...DG/B14 - 80S/4A Delik milli, Gövdeden montajlı, B14 Flanşlı Helisel sonsuz dişlili, Motorlu redüktör Helical worm geared motor, Hollow shaft, Case mounted, Flange B14, With motor PSH 2080...DG/B14 - IEC 80 Delik milli, Gövdeden montajlı, B14 Flanşlı Helisel sonsuz dişlili, IEC adaptörlü redüktör Helical worm geared motor, Hollow shaft, Case mounted, Flange B14, With IEC adapter PSH 2080...DG/B14 - W Delik milli, Gövdeden montajlı, B14 Flanşlı Helisel sonsuz dişlili, W kovanlı redüktör Helical worm geared motor, Hollow shaft, Case mounted, Flange B14, With free input shaft PSH 2080...DG/B5 - 80S/4A R L R L R L R Delik milli, Gövdeden montajlı, B5 Flanşlı Helisel sonsuz dişlili, Motorlu redüktör Helical worm geared motor, Hollow shaft, Case mounted, Flange B5, With motor R PSH 2080...DG/B5 - IEC 80 Delik milli, Gövdeden montajlı, B5 Flanşlı Helisel sonsuz dişlili, IEC adaptörlü redüktör Helical worm geared motor, Hollow shaft, Case mounted, Flange B5, With IEC adapter PSH 2080...DG/B5 - W R Delik milli, Gövdeden montajlı, B5 Flanşlı Helisel sonsuz dişlili, W kovanlı redüktör Helical worm geared motor, Hollow shaft, Case mounted, Flange B5, With free input shaft www.pgr.com.tr 27 SİPARİŞ ÖRNEĞİ EXAMPLE FOR ORDERING PSH 2100 10,73 DG/KS - 132 M / 4 BRE IEC IEC W W 63 71 80 90 100 112 132 160 R Çıkış Yönü Output Direction L/R : Sol/Sağ L/R : Left/Right Motorlu With Motor 25 - 27 Gövde Büyüklüğü Kutup sayısı Case Width Number of Poles Motor Aksesuarları Motor Accessories 2 4 6 4-2 8-2 63 M 71 M 80 M 90 S/L 100 L 112 M 132 S/M 160 M/L Diğer Kutup kombinasyonları istendiğinde karşılanacaktır. İges: Tahvil İges: Reduction Other pole combinations on request 45-59 BRE RG SR HL TF TW WU EF ZF DF IG KK/FK B 22 Standart Ürünler Available standard products DG/KS: Delik Milli, Konik Sıktırmalı DG/KS: Hollow Shaft, Shrink Disc Connector 2 Kademe Reduction 2 3 61-83 TMA ÇMA DG/B14 DG/B5 DG/KS DG/Ç-KK TMG/B5 DG/KS-KK 25 - 27 DG/TK DG/Ç 100 Sonsuz dişli merkezi ile çıkış şaftı merkezleri arası uzaklık Distance between center of the worm gear and center of output shaft 040 050 100 125 063 080 61-83 Tip ( POLAT Helisel - Sonsuz Redüktör ) Type ( POLAT Helical - Worm Gearbox ) 28 www.pgr.com.tr www.pgr.com.tr Reducers are delivered as being filled with mineral oil. Following tables are presented properties of oils depend on ambient temperature. Gear units which is W or IEC adapter type and gear motors are charged with lubricant. Ambient temperature is played important role for choosing lubricant. Relation between ambient temperature and properties of oils are shown in table. Lubricants must be changed every 10000 hours or after two years, but this time changes when synthetic oil is used. Lubricants must be changed every 20000 hours or after four years where synthetic oil is used. However, operating conditions should be considered for changing oil time eg. in aggressive environment large temperature changing, oil must be changed frequently. For bearings grease should be changed every 10000 running time and it should be done with fresh grease and least 1/3 of bearing must be covered. Redüktörler fabrikadan çalışmaya hazır ve mineral yağ doldurulmuş olarak gönderilirler. Bütün dişli üniteler aşağıdaki tablonun ortam sıcaklığı sütununda listesi verilen yağlayıcı (normal) ile dolu olarak sevk edilirler. Diğer ortam sıcaklıkları için listede verilen yağlayıcılar ilave masraf karşılığında temin edilebilir. Yağlayıcı her 10 000 çalışma saatinde veya 2 yıl sonra değiştirilmelidir. Sentetik yağlar için yağ değişikliği her 20000 çalışma saatinde veya 4 yıl sonra yapılmalıdır. Zorlu çalışma koşullarında örneğin yüksek rutubet ve büyük sıcaklık değişimleri ve kötü çevre şartları gibi durumlarda daha kısa aralıklarla yağ değişimi yapılması tavsiye edilir. Yağ değişiminin üniteyi komple temizleme işlemi ile birleştirilmesi önerilir. Rulman içerisindeki gres her 10000 çalışma saatinde değiştirilmeli ve yeni gres ile doldurulmalıdır. Bu işlem yapılırken rulmanın 1/3 ünün gresle dolu olması sağlanmalıdır. Redüktör Tipi Yağ Tipi Synthetic oil Sentetik yağ Synthetic grease # - 50...110 # - 50...110 Mineral oil grease Sentetik gres - 30...60 Normal Aero Shell Grease 16 oder 7 Alvania Fett RL 3 Alvania Fett R 3 or Shell Tivela compound A Cassida 220 Shell Tivela Oel WB Shell Tellus Oel T 15 Shell omala Oel 100 Shell Omala Oel 220 SHELL Mobiltemp SHC 32 Mobilux 2 Mobilux 3 Glygoyle Grease 00 Mobil DTE FM 220 Glygoyle 30 Mobil DTE 11 M Mobilgear 627 Mobilgear 630 MOBİL # -30° C altında ve 60° C üzerindeki ortam sıcaklıklarında şafttaki sızdırmazlık elemanı için özel kalitedeki malzeme kullanılmalıdır. Anti Friction Bearings Rulmanlar ISO VG 220 - 25...80 - 35...60 ISO VG 220 ISO VG 220 ISO VG 15 ISO VG 100 - 25...80 - 25...80 # - 50...-15 - 15...25 ISO VG 220 - 5...40 Normal ISO vizkozite sınıfı ISO viscosity class Ambient Temp. °C Ortam Sıcaklığı Mineral yağlı gres Synthetic fluid grease Akışkan sentetik gres Food - grade oil Gıda yağları Biyolojik Sentetik yağ Helical -Worm Gearboxes Biodegradable oil Helisel - Sonsuz Dişlili Redüktör Mineral oil Mineral yağ Type of gearbox Type of Lubricant Energrease LS 2 Energrease LS 3 Enersyn GSF Biogear SE 220 Enersyn SG-XP 220 Bartran HV 15 Energol GR-XP 100 Energol GR-XP 220 BP Discor 8 - EP 2 Glissando FT 3 Glissando 30 Glissando 20 Glissando 6833 EP 00 Renolin 220 Plantogear 220 S Polydea PGLP 220 Alrkraft Hydraulic Oil 15 Deagear DX SAE 80W Falcon CLP 150 Deagear DX SAE 85W-90 Falcon CLP 220 DEA Product 783/46 Spheerol EPL 2 Aralub BAB EP 2 Aralub SKL 2 Spheerol AP 3 Spheerol AP 2 LZV - EP Aralub HL 3 Aralub HL 2 Alpha Gel 00 OPTIMOL optileb GE 220 Degol FG 220 Aralub SKA 00 Carelube GES 220 Alphasyn PG 220 Alpha SP 220 Alpha MW 220 Alpha MAX 220 Alpha SP 100 Alpha MW 100 Alpha MAX 220 Hyspin AWS 15 Hyspin SP 15 Hyspin ZZ 15 CASTROL Bio-Degol S 220 Degol GS 220 Vitamol 1010 Degol BG 100 Degol BG 220 ARAL Klübersynth GH 6 - 220 Tribol 3499 Tribol 3030/100-2 Tribol 4020/220-2 Tribol 3785 Tribol 800/1000 Tribol Food Proof 1810/220 Isoflex Topas NB52 Centoplex 3 Centoplex 2 Klübersynth GE 46 -1200 Klüberoil 4UH1 - 220 Tribol Bio Top Klüber - Bio 1418/220 GM 2 - 220 Tribol 800/220 Isoflex MT 30 rot Klüberoil GEM 1-100 Tribol 1100/100 Tribol 770 Klüberoil GEM 1-220 KLÜBER Tribol 1100/220 TRIBOL # Different materials should be used for sealing rings at operation temperature where temperature is below -30 ºC and above 60 ºC. Beacon 325 Beacon 2 Beacon 3 Fliessfett S 420 GEAR OIL FM 220 ESSO Glycolube 220 Univis J 13 Spartan EP 100 Spartan EP 220 ESSO Note: Consider that different kind of oil ( synthetic and mineral oil) should not be mixed. Lubricating oil properties and selection of oil must be correct for the reducers to have long life and to run with good performance. In order to prevent oil leakage during long period storage due to inner pressure, top plug should be removed according to assembly type and venting plug should be mounted. Not: Sentetik ve mineral yağlayıcılar birbirine karıştırılmamalıdır. / LUBRICATION YAĞLAMA Çalıştırmadan veya uzun süreli olarak depoya kaldırmadan önce ventildeki tapa sökülüp, havalandırma tapası takılarak aşırı basınç ve yağ sızıntısı önlenmelidir. YAĞLAMA LUBRICATION 29 MONTAJ POZİSYONLARI MOUNTING POSITIONS PSH Ayaklı / Foot Mounted M1 M6 PSH 2050 PSH 2063 M2 PSH 2080 PSH 2100 M4 PSH 2125 M5 M3 M1 M6 M2 PSH 3050 PSH 3063 PSH 3080 PSH 3100 PSH 3125 M4 M5 M3 Havalandırma tapası / Vent plug 30 Boşaltma tapası / Drain plug Yağ Seviye tapası / Oil level www.pgr.com.tr MONTAJ POZİSYONLARI MOUNTING POSITIONS PSH Gövdeden Montajlı / Case Mounted M1 M6 PSH 2050 PSH 2063 PSH 2080 PSH 2100 M4 M2 PSH 2125 M5 M3 M1 M6 M2 PSH 3050 PSH 3063 PSH 3080 PSH 3100 PSH 3125 M4 M5 M3 Havalandırma tapası / Vent plug www.pgr.com.tr Boşaltma tapası / Drain plug Yağ Seviye tapası / Oil level 31 MONTAJ POZİSYONLARI MOUNTING POSITIONS TERMİNAL KUTUSU VE KABLO GİRİŞ YÖNLERİ / POSITION OF TERMINAL BOX AND CABLE ENTRY M1 3 ııı ıv M5 2 ııı ıv ıı ı 3 1 ıı 2 ı 4 1 4 M3 3 1 ı ıv ıı ıı ııı 1 2 ıv ııı ı 32 M6 4 2 4 3 www.pgr.com.tr MONTAJ POZİSYONLARI MOUNTING POSITIONS M2 M6 M1 PSH 2040 Ayak Montajlı Foot Mounted M5 M4 M3 M2 M6 M1 M4 M5 PSH 2040 Gövdeden Montajlı Case Mounted M3 www.pgr.com.tr 33 MONTAJ POZİSYONLARI MOUNTING POSITIONS M6 M2 M1 M4 PSH 2050...2125 Ayak Montajlı Foot Mounted M5 M3 M6 M2 M1 M4 M5 PSH 2050...2125 Gövdeden Montajlı Case Mounted M3 34 www.pgr.com.tr MONTAJ POZİSYONLARI MOUNTING POSITIONS M2 M6 M1 M4 PSH 3050...3125 Ayak Montajlı Foot Mounted M5 M3 M6 M2 M4 M1 M5 PSH 3050...3125 Gövdeden Montajlı Case Mounted M3 www.pgr.com.tr 35 YAĞ MİKTAR TABLOSU LUBRICATION LEVELS Ayak Montajlı / Foot Mounted Gövdeden Montajlı / Case Mounted (Litre) (L) 30-35 M1 M2 M3 M4 M5 M6 M1 M2 M3 M4 M5 M6 PSH 2040 0.50 0.65 0.65 0.65 0.55 0.55 0.55 0.85 0.80 0.65 0.55 0.55 PSH 2050 0.60 1.25 0.80 1.20 0.75 0.75 0.40 1.35 0.85 1.20 0.95 0.95 PSH 2063 0.45 1.80 1.35 1.65 1.05 1.05 0.45 1.60 1.25 1.60 1.35 1.35 PSH 2080 0.90 2.75 1.90 3.00 1.85 1.85 0.70 3.00 2.25 3.30 2.30 2.30 PSH 2100 1.60 6.00 3.80 5.95 3.50 3.50 1.35 6.40 4.40 6.40 4.00 4.00 PSH 2125 3.10 12.10 6.90 11.30 6.40 6.40 3.00 11.2 6.70 10.40 6.80 6.80 Ayak Montajlı / Foot Mounted Gövdeden Montajlı / Case Mounted (Litre) (L) 36 30-35 M1 M2 M3 M4 M5 M6 M1 M2 M3 M4 M5 M6 PSH 3050 0.95 1.60 1.20 1.50 1.00 1.00 0.85 1.75 1.10 1.70 1.20 1.20 PSH 3063 0.90 2.40 1.75 2.10 1.30 1.30 0.90 2.10 1.50 1.95 1.60 1.60 PSH 3080 1.80 3.35 2.30 3.70 2.10 2.10 1.15 3.90 2.50 3.80 2.55 2.55 PSH 3100 2.20 8.10 4.40 7.35 4.00 4.00 2.15 6.90 5.00 7.10 4.45 4.45 PSH 3125 5.10 15.10 7.90 14.50 7.30 7.30 4.00 12.90 7.70 12.1 7.70 7.70 www.pgr.com.tr KİLİT BACKSTOP Kilit Backstop Opsiyonel olarak kilitlerimiz mevcuttur. Bu kilitler tek yöne dönmeye izin verirken, diğer yöne dönmeyi engeller. 63 gövde ve üzeri üç fazlı motorlar, W kovanları ve IEC adaptörleri yağlanması yapılmış kilit ile donatılabilir. Bu kilitler çıkartılabilir, merkezkaç kuvveti tarafından kontrol edilir ve yaklaşık olarak 900 d/dk üzerine çıktıktan sonra aşınmaya maruz kalır. Backstop system is available for all type of helical gear unit. Lubricated backstop system could be used optionally for using motor size 63 and greater, W cylinder and IEC adapters. Backstop system permits just one direction rotation it resists another direction rotation. Rotation speed is important for abrasion. Nearly 900 min-1 and greater rotation speed influece abration. Please, determine direction of rotation when you offer. Direction of rotation should be determined according to output shaft. Kilit mekanizmalı redüktörler için çıkış şaftının veya milinin dönme yönünün verilmesi gerekir. Dönme yönü çıkış şaftına veya çıkış miline göre düzenlenir. Kararlaştırılan dönme yönü için, tarif edilen dönme yönü her zaman çıkış şaftına veya miline göre düzenlenir. Delik milli redüktörler ise konik sıktırma tarafından belirlenir. Arrows which is designated by ‘CW’ or ‘CCW’ shows locking direction from viewing at face of output shaft end. For hollow shafts gearboxes this direction determined by shrinkdisc side. DİKKAT: Motoru ve sistemi çalıştırmadan önce redüktörün dönme yönünü kontrol ediniz. Redüktör üzerindeki oklar dönme yönünü gösterir. Precaution : When you receive gear units, please check direction of rotation before running or installation for avoid damage. Bloke edilen yön CCW ise Dönme Yönü CW If Locking direction is CCW, Rotational direction is CW Bloke edilen yön CW ise Dönme Yönü CCW If Locking direction is CW, Rotational direction is CCW CW : Saat yönü CW CCW : Saat yönü tersi : Clockwise rotation CCW : Counterclockwise rotation Tip Type 2 kademe helisel - sonsuz redüktör PSH 2040... PSH 2125 Çıkış şaftı L veya konik sıktırma R’de 2-stage helical worm gear motor: PSH 2040... PSH 2125 Output shaft position L or shrink disc at R 2 kademe helisel - sonsuz redüktör PSH 2040... PSH 2125 Çıkış şaftı R veya konik sıktırma L’de 2-stage helical worm gear motor: PSH 2040... PSH 2125 Output shaft position R or shrink disc at L 3 kademe helisel - sonsuz redüktör PSH 3050... PSH 3125 Çıkış şaftı L veya konik sıktırma R’de 3-stage helical worm gear motor: PSH 3050... PSH 3125 Output shaft position L or shrink disc at R 3 kademe helisel - sonsuz redüktör PSH 3050... PSH 3125 Çıkış şaftı R veya konik sıktırma L’de 3-stage helical worm gear motor: PSH 3050... PSH 3125 Output shaft position R or shrink disc at L Çıkış Şaftı Dönüş Yönü: CW Output shaft rotational direction: CW Çıkış Şaftı Dönüş Yönü: CCW Output shaft rotational direction: CCW Motor Dönüş Yönü CW Motor rotational direction CW Motor Dönüş Yönü CCW Motor rotational direction CCW Motor Dönüş Yönü CCW Motor rotational direction CCW Motor Dönüş Yönü CW Motor rotational direction CW Motor Dönüş Yönü CCW Motor rotational direction CCW Motor Dönüş Yönü CW Motor rotational direction CW Motor Dönüş Yönü CW Motor rotational direction CW Motor Dönüş Yönü CCW Motor rotational direction CCW CCW CW www.pgr.com.tr CW CCW 37 TOLERANSLAR TOLERANCES GEARED MOTORS AND GEARBOXES INFORMATION REFERRING TO DIMENSION - DRAWINGS MOTOR VE REDÜKTÖRLERDE BOYUT - ÇİZİM BİLGİLERİ Motor ölçüleri istenen opsiyona göre ölçüleri değişebilir. Motor dimension could be changed according to customer purchase. DELİK MİLLİLER Delik mil çapı toleransı için ( DIN 748 ) ISO H7. Müşteri mili çap toleransı ISO h6. "H" yükleme tipi bulunuyorsa ISO k6 HOLLOW SHAFTS Tolerance of hollow shaft (DIN 748) ISO H7. Tolerance of customer’s solid shaft which is used for hollow shaft ISO h6, with type of load classification ‘H’ which is heavyshock operation ISO k6. IEC - ADAPTÖR Flanş merkezi çap toleransı için ISO H7 IEC - ADAPTER Diameter tolerance of flange centering is machined according to ISO H7. GİRİŞ VE ÇIKIŞ ŞAFTLARI INPUT AND OUTPUT SHAFT Mil çapı toleransı ( DIN 748 ) : Tolerances of solid shaft ( DIN 748 ) : Ø 14 ile Ø 50 mm arası için ISO k6, Ø 50 mm üzeri için ISO m6 between Ø 14 - Ø 50 mm to ISO k6, greater than Ø 50 mm to ISO m6. Şaftta diş çekilmiş delikler için DIN 332/2 ye göre; Tapped center hole is machined according to DIN 332, sheet 2; = Ø 13 > Ø 16 > Ø 21 > Ø 24 > Ø 30 > Ø 38 > Ø 50 > Ø 85 - Ø 16 Ø 21 Ø 24 Ø 30 Ø 38 Ø 50 Ø 85 Ø 130 M5 M6 M8 M10 M12 M16 M20 M24 - Ø 16 Ø 21 Ø 24 Ø 30 Ø 38 Ø 50 Ø 85 Ø 130 M5 M6 M8 M10 M12 M16 M20 M24 61-83 Kama yatakları DIN 6885 Keyways are machined according to DIN 6885, sheet 1 Şaft boyu "h" DIN 747 Shaft heights are machined according to "h" to DIN 747 FLANŞLAR FLANGES Flanş merkezi çap toleransı ( DIN 42948 ); Diameter tolerance of flange centering is machined according to ( DIN 42948 ); < Ø 230 mm’ ye kadar ISO j6, > Ø 230 mm üzeri için ISO h6 38 61-83 = Ø 13 > Ø 16 > Ø 21 > Ø 24 > Ø 30 > Ø 38 > Ø 50 > Ø 85 < Ø 230 mm to ISO j6, > Ø 230 mm to ISO h6 www.pgr.com.tr MOTOR PLATFORMU MOTOR PLATFORM INSTALLATION Motor Platformu Ölçüleri Motor Platform Dimensions C E A S Ød B Hmin Hmax Z t w v u x Tip Type I O R Bağlantı boyutları ve platform ölçüleri Connection and Platform dimensions Flanş Flange Mil Ölçüleri Shaft size A B C E R S H min H max Z O d I t u v w x MK I 63 M - 100 L 224 253 206 45 60 140 153 173 41 121.5 24 50 27 8 5 40 8 160 S MK II 80 M - 112 M 238 320 252 50 66 145 199 224 48 115.5 28 60 31 8 5 50 9 250 S MK III-A 90 S - 132 M 305 430 302 58 110 260 254 286 61 127 38 80 41 10 5 70 8 300 S MK III-B 90 S - 132 M 305 430 302 58 110 260 254 286 91 172 42 110 45 12 10 90 8 Ø250 MK IV 112 M - 200L 478 530 402 75 130 315 315 355 116 254 65 140 69 18 15 110 8 Ø350 MK V 200 L - 250 M 664 690 572 105 382 369 465 515 119 247 65 140 69 18 15 110 12 Ø450 Motor Platform Montajı Assembling of Motor Platform Motor platform tasarımı PGR monoblok dişli ünitesi serilerinin tüm montaj pozisyonlarında kullanılabilir. 5 motor platformu boyutu tüm motor-redüktör kombinasyonlarını kapsar. Çok kademeli redüktörleri de karşılayan ayrı ayrı redüktörler için seçim tablolarından motor platformları bakılabilir. Motor platform design could be used at all PGR monoblock gear unit series for all mounting positions. There are 5 motor platform designs. This platforms are provide using possibility with all motorgear unit series. Motor platform type, dimension and suitable belt type could be followed from table which is shown on page 45 - 46,on the other hand this table is valid for multi stage gear units. * Her montaj pozisyonu için kullanılabilir. * Optimum kayış gerilimi için kolayca yönlendirilebilen yükseklik ayarlaması yapılabilir. * Sabitleme elemanlarıda dahil olmak üzere korozyona karşı dirençlidir. * Hafif, vibrasyonu absorbe eden alümiyum yapı mevcuttur. * Birçok motor boyutu için kullanım kolaylığı sağlar. * Tabloya göre “i” oranının 1’e eşit olduğu durumlar için önerilir. * Her yöne 90°’ ye kadar eksen etrafında dönebilme özelliğine sahiptir. www.pgr.com.tr * It could be used for all mounting positions. * It could be adjusted for optimum belt-tension and height easily. * It has high corrosion resistance however fixing elements have this property. * Alumium structure provide vibration absorbing and light weight. * It could be used with all motor type. * We recommend, it is suitable for while “i” ratio is equal to one, table is prepared according to this situation * It could be adjusted to all direction up to 90° 39 MOTOR PLATFORMU MOTOR PLATFORM INSTALLATION Type PSH 2050 PSH 2063 PSH 2080 PSH 2100 PSH 2125 Motor W III W II W III 63 M MK I 71 M MK I 80 M MK I MK II 90 S 90 L MK I MK II MK III - A 100 L MK I MK II MK III - A MK II MK III - A Tip 112 M 132 S 132 M MK III - A Seçim Örneği: Çıkış gücü ve hızına göre gerekli olan dişli ünitesinin temel tipini ve gerekli çıkış gücü veya çıkış dönüş hızına dayanan çıkış gücü ve dişli oranını saptayınız. Örnek : 0.75 kW , 17.3 d/dk i = 78.83 PSH 2080 - 80 M Selection Example: Motor platform assignment could be explained in one example hence, according to selecting gear unit reduction ratio,output speed and motor power is determined. For instance ; 0.75 kW , 17.3 min-1, i = 78.83 PSH 2080 - 80 M Bu esas dişli ünitesi tipi için, motor platformu MK I tayin edildiğini tablodan (yukarıya bakınız) saptayınız. Bu nedenle,tam tip tanımı PSH 2080 - MK I - 80’dir. From table (see above of this page) type of gear unit (column) and motor type ( row ) are intersected. Hence, from this motor bracket MK I dimension should be used. Full designation is PSH 2080 - MK I - 80. MK I için, tablodan ( sayfa 41 ) bant makarası ve bant tipi ile ilgili daha fazla bilgi alabilirsiniz. Following page shows more detail about belt pulley and type of belt (see page 41). You can see dimension of belt length with motor platform assignment. Esas boyutlar, tabloda gösterilmiştir. 40 www.pgr.com.tr MOTOR PLATFORMU MOTOR PLATFORM INSTALLATION min A max dwK dwG Ayar aralığı Adjustment range Kayış uzunluğu Belt length Amin Amax 63 M/4A 63 M/4B 71 M/4A 71 M/4B 80 M/4A 80 M/4B 90 S/4A 90 L/4A 100 L/4A 100 L/4B 0.12 0.18 0.25 0.37 0.55 0.75 1.10 1.50 2.20 3.00 216 216 224 224 233 233 243 243 253 253 236 236 244 244 253 253 263 263 273 273 80 M/4A 80 M/4B 90 S/4A 90 L/4A 100 L/4A 100 L/4B 112 M/4B 0.55 0.75 1.10 1.50 2.20 3.00 4.00 279 279 289 289 299 299 311 304 304 314 314 324 324 336 90 S/4A 90 L/4B 100 L/4A 100 L/4B 112 M/4B 132 S/4C 132 M/4B 132 M/4 1.10 1.50 2.20 3.00 4.00 5.50 7.50 9.20 344 344 354 354 366 386 386 386 376 376 386 386 398 418 418 418 112 M/4B 132 S/4C 132 M/4B 132 M/4 160 M/4B 160 L/4A 180 M/4B 180 L/4B 200 L/4C 4.00 5.50 7.50 9.20 11.0 15.0 18.5 22.0 30.0 427 447 447 447 475 475 495 495 515 467 487 487 487 515 515 535 535 555 200 L/4C 225 S/4A 225 M/4C 30.0 37.0 45.0 665 690 690 715 740 740 (dwg = 80) (i = 1) Lw 697 697 710 710 737 737 750 750 772 772 (dwg = 112) (i = 1) Lw 930 930 950 950 980 980 1000 (dwg = 160) (i = 1) Lw 1222 1222 1250 1250 1262 1312 1312 1312 (dwg = 200) (i = 1) Lw 1500 1550 1550 1550 1600 1600 1650 1650 1700 (dwg = 250) (i = 1) Lw 2182 2207 2207 250 M/4C 55.0 715 765 (dwg = 250) (i = 1) Lw 2240 MK V MK V Kayış Tipi SPB Kayış Tipi SPA Belt type SPB Belt type SPA MK IV Kayış Tipi XPA Belt type XPA MK I Kayış Tipi SPZ Belt type SPZ (kW) MK II Kayış Tipi XPZ Belt type XPZ Çıkış Output MK III Kayış Tipi SPZ Belt type SPZ Motor www.pgr.com.tr Mil merkezi uzaklığı Kayış sayısı Shaft centre distance Number of belts A 223 223 229 229 243 243 249 249 260 260 1 1 1 1 1 1 1 2 2 3 289 289 299 299 314 314 324 1 1 1 1 1 2 2 360 360 374 374 380 405 405 405 1 1 1 1 2 2 3 3 436 461 461 461 486 486 511 511 536 1 1 2 2 2 3 3 4 4 698 710 710 4 4 5 727 4 41 Motorlu Seçim Sayfaları Selection Of Gearmotors PSH 2040 DG PSH 2040 TMA PSH 2050 DG ... 2125 DG PSH 3050 DG ... 3125 DG PSH 2050 TMA ... 2125 TMA PSH 3050 TMA ... 3125 TMA www.pgr.com.tr 43 TEKNİK AÇIKLAMALAR TECHNICAL EXPLANATIONS Motorlu redüktör performans tablolarının yapısı. Notify about performance tables for Geared motor. Redüktör motor gücü Gear unit motor power 0.55 kW Motor gücü Rated motor power Ölçü sayfaları Drawing page Çıkış devri Output speed Çıkış momenti Output torque Servis faktörü Service factor Tahvil oranı Reduction ratio P1 [kW] 0.55 n2 [Min -1] M2 fB [Nm] 1.2 1.5 1.8 2293 1811 1578 1.3 1.7 2.0 iges 1198.50 928.25 793.81 Redüktör tipi Gear unit motor type FR FA FR GR FA GR [kN] [kN] [kN] [kN] 25.0 27.0 27.0 21.0 21.0 21.0 27.0 27.0 27.0 28.0 28.0 28.0 Ağırlık Weight Tip / Type Kg Sayfa Page mm PSH 3125 - 80M/4A 117 83-84 Müsaade edilebilir eksenel yükler Güçlendirilmiş rulmanlarda Müsaade edilebilir radyal yükler Normal rulmanlarda FR için listelenmiş değerlerde FA = 0 (N) olarak hesaplanmıştır Permissible radial force or load on output shaft while normal bearings are used. For this load FA is assumed equal zero. FA = 0 (N) Müsaade edilebilir eksenel yükler Normal rulmanlarda FA için listelenmiş değerlerde FR = 0 (N) olarak hesaplanmıştır Permissible axial force or load on output shaft while normal bearings are used. For this load FR is assumed equal zero. FR = 0 (N) 44 FA için listelenmiş değerlerde FR = 0 (N) olarak hesaplanmıştır Permissible axial force on output shaft while reinforced bearings are used. For this load FR is assumed equal to zero. FR = 0 (N) Müsaade edilebilir radyal yükler Güçlendirilmiş rulmanlarda FR için listelenmiş değerlerde FA = 0 (N) olarak hesaplanmıştır Permissible radial force or load on output shaft while reinforced bearings are used. For this load FA is assumed equal to zero. FA = 0 (N) www.pgr.com.tr 0.12 kW P1 [kW] Tip / Type Kg Sayfa Page mm 16.0 16.0 PSH 3100 - 63M/4A 65 78-79 13.0 13.0 13.0 13.0 12.0 12.0 12.0 12.0 PSH 3080 - 63M/4A 37 74-75 9.0 13.0 12.0 PSH 2080 - 63M/6 32 72-73 10.0 10.0 9.0 9.0 13.0 13.0 12.0 12.0 PSH 2080 - 63M/4A 32 72-73 1343.24 1140.10 5.0 5.0 8.0 8.0 9.0 9.0 10.0 10.0 PSH 3063 - 63M/4A 27 70-71 0.9 1.1 1.2 626.57 529.13 464.67 6.0 7.0 7.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 PSH 2063 - 63M/6 22 68-69 262 226 198 154 130 116 86 78 1.4 1.6 1.8 2.2 2.8 3.1 4.2 4.0 626.57 529.13 464.67 264.14 223.06 195.89 183.60 162.27 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 10.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 PSH 2063 - 63M/4A 22 68-69 1.0 1.3 1.5 1.7 2.0 2.2 247 # 239 # 242 # 238 # 234 # 239 # 0.8 0.8 0.8 0.8 0.8 0.8 1330.71 991.88 868.89 755.93 663.52 586.50 4.0 4.0 4.0 4.0 4.0 4.0 8.0 8.0 8.0 8.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 PSH 3050 - 63M/4A 23 66-67 1.6 2.0 2.2 224 # 235 # 227 # 0.8 0.8 0.8 524.57 439.88 385.33 4.0 4.0 4.0 8.0 8.0 8.0 6.0 6.0 6.0 8.0 8.0 8.0 PSH 2050 - 63M/6 18 64-65 2.5 3.0 3.4 5.7 6.8 7.7 8.9 10.1 11.5 14.2 230 # 188 168 135 115 101 69 62 56 46 0.8 1.0 1.1 1.4 1.6 1.8 2.5 2.7 3.0 3.7 524.57 439.88 385.33 231.43 194.06 170.00 147.90 129.82 114.75 92.73 4.0 5.0 5.0 5.0 5.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 PSH 2050 - 63M/4A 18 64-65 n2 -1 fB [Min ] M2 [Nm] 0.9 1.1 732 490 2.2 3.2 1.1 1.4 1.6 1.9 490 391 336 301 1.3 0.12 iges FR FA FR GR FA GR [kN] [kN] [kN] [kN] 1506.84 1173.93 16.0 16.0 12.0 12.0 16.0 16.0 1.6 2.0 2.3 2.6 1199.07 955.78 805.70 705.97 9.0 9.0 10.0 10.0 9.0 9.0 9.0 9.0 424 1.8 656.63 9.0 2.0 4.8 280 164 2.5 4.3 656.63 276.81 1.0 1.2 484 # 452 # 0.8 0.8 1.4 1.6 1.9 390 329 295 2.1 2.5 2.8 5.0 5.9 6.7 7.2 8.1 # Max. çıkış momenti fB = 0.8 # Max. Output Torque With fB = 0.8 İşareti belirtilen tahvil oranlarının B14 veya B5 flanşlı gövde bağlantılılar için geçerli olduğunu gösterir. Sign shows that this reduction ratio is valid for geared motor with B14 and B5 flange www.pgr.com.tr 45 0.12 kW 0.18 kW P1 [kW] 0.12 0.18 n2 -1 [Min ] M2 fB iges [Nm] 4.3 5.5 10.2 11.4 13.2 15.2 17.2 19.5 22.0 25.3 28.2 29.4 31.3 35.8 40.8 46.1 59.9 67.4 77.1 87.8 99.3 128.9 149.7 175.4 198.7 257.8 299.4 122 103 76 53 47 41 37 33 41 26 31 22 25 23 20 18 14 13 12 10 9 7 6 5 5 4 3 1.1 2.0 2.6 2.9 3.7 4.5 720 430 345 317 257 214 # FR FA FR GR FA GR [kN] [kN] [kN] [kN] Tip / Type Kg Sayfa Page mm 0.8 1.0 1.4 1.8 2.0 2.1 2.3 2.5 2.5 3.1 3.1 3.6 3.2 3.5 3.9 4.1 5.2 5.8 6.5 7.0 7.7 9.2 10.2 10 11 12 14 304.20 237.90 128.70 115.23 99.45 86.86 76.38 67.50 59.80 52.00 46.77 44.78 42.08 36.75 32.31 28.56 22.00 19.55 17.08 15.01 13.27 10.22 8.80 7.51 6.63 5.11 4.40 3.0 3.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 - - PSH 2040 - 63M/4A 10 62-63 2.2 3.7 4.6 5.0 5.9 7.1 1173.93 660.00 519.44 468.59 365.06 298.69 16.0 16.0 16.0 16.0 16.0 16.0 12.0 12.0 12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 PSH 3100 - 63M/4B 65 78-79 1.4 604 2.4 645.00 16.0 12.0 16.0 16.0 PSH 2100 - 71M/6A 58 76-77 1.1 1.4 1.7 1.9 720 574 494 442 1.1 1.3 1.6 1.7 1199.07 955.78 805.70 705.97 7.0 8.0 9.0 9.0 9.0 9.0 9.0 9.0 12.0 13.0 13.0 13.0 12.0 12.0 12.0 12.0 PSH 3080 - 63M/4B 37 74-75 1.4 589 1.3 656.63 8.0 9.0 13.0 12.0 PSH 2080 - 71M/6A 33 72-73 2.0 4.9 5.7 7.2 411 240 165 136 1.7 3.0 4.3 4.9 656.63 276.81 234.60 187.00 9.0 10.0 10.0 10.0 9.0 9.0 9.0 9.0 13.0 13.0 13.0 13.0 12.0 12.0 12.0 12.0 PSH 2080 - 63M/4B 32 72-73 475 1.7 0.8 529.13 426 1.9 0.8 464.67 0.9 626.57 384 2.1 1.1 529.13 331 2.5 1.2 464.67 291 2.9 1.5 264.14 226 5.1 1.9 223.06 191 6.0 2.1 195.89 170 6.9 2.8 183.60 127 7.3 2.7 162.27 114 8.3 2.9 144.50 103 9.3 3.4 118.23 88 11.4 3.8 104.13 78 12.9 # Max. çıkış momenti fB = 0.8 # Max. Output Torque With fB = 0.8 5.0 6.0 6.0 7.0 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 9.0 10.0 10.0 10.0 10.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 PSH 2063 - 71M/6A 23 68-69 PSH 2063 - 63M/4B 22 68-69 İşareti belirtilen tahvil oranlarının B14 veya B5 flanşlı gövde bağlantılılar için geçerli olduğunu gösterir. Sign shows that this reduction ratio is valid for geared motor with B14 and B5 flange 46 www.pgr.com.tr 0.18 kW 0.25 kW P1 [kW] 0.18 Tip / Type Kg Sayfa Page mm 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 PSH 2050 - 63M/4B 18 64-65 - - PSH 2040 - 63M/4B 11 62-63 21.0 21.0 27.0 27.0 28.0 28.0 PSH 3125 - 71M/4A 114 82-83 14.0 16.0 16.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 16.0 16.0 PSH 3100 - 71M/4A 66 78-79 645.00 16.0 12.0 16.0 16.0 PSH 2100 - 71M/6B 59 76-77 2.5 645.00 16.0 12.0 16.0 16.0 PSH 2100 - 71M/4A 58 76-77 968 772 664 594 0.8 1.0 1.2 1.3 1199.07 955.78 805.70 705.97 1.0 5.0 7.0 8.0 9.0 9.0 9.0 9.0 10.0 11.0 12.0 13.0 12.0 12.0 12.0 12.0 PSH 3080 - 71M/4A 38 74-75 1.4 1.7 810 655 0.9 1.1 656.63 520.20 5.0 8.0 9.0 9.0 11.0 13.0 12.0 12.0 PSH 2080 - 71M/6B 34 72-73 2.1 5.0 5.9 7.4 8.8 553 323 222 183 157 1.3 2.2 3.2 3.7 4.3 656.63 276.81 234.60 187.00 157.64 8.0 10.0 10.0 10.0 10.0 9.0 9.0 9.0 9.0 9.0 13.0 13.0 13.0 13.0 13.0 12.0 12.0 12.0 12.0 12.0 PSH 2080 - 71M/4A 33 72-73 n2 -1 M2 fB 5.8 6.9 7.9 9.1 10.4 11.7 14.5 16.7 20.6 23.5 26.6 198 169 148 102 91 82 68 60 60 53 47 0.9 1.1 1.3 1.7 1.8 2.0 2.5 2.8 2.8 3.2 3.3 11.7 13.5 15.5 17.6 19.9 22.5 25.9 28.8 30.0 32.0 36.6 41.6 47.1 61.2 68.8 78.8 89.6 101.4 131.7 152.9 179.2 202.9 263.3 305.8 78 69 60 54 48 60 38 47 34 38 33 29 26 20 19 17 15 14 10 9 8 7 6 5 0.9 1.2 FR FA FR GR FA GR [kN] [kN] [kN] [kN] 231.43 194.06 170.00 147.90 129.82 114.75 92.73 80.75 65.25 57.27 50.63 5.0 5.0 5.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 1.2 1.3 1.5 1.6 1.7 1.7 2.1 2.1 2.4 2.3 2.4 2.7 2.8 3.5 3.9 4.4 4.8 5.3 6.3 7.0 6.8 7.3 8.4 9.3 115.23 99.45 86.86 76.38 67.50 59.80 52.00 46.77 44.78 42.08 36.75 32.31 28.56 22.00 19.55 17.08 15.01 13.27 10.22 8.80 7.51 6.63 5.11 4.40 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.0 1363 1050 2.3 2.9 1475.08 1198.50 27.0 27.0 0.9 1.2 2.1 1351 968 578 1.2 1.6 2.8 1506.84 1173.93 660.00 1.4 829 1.8 2.2 565 1.2 1.5 1.7 2.0 [Min ] 0.25 iges [Nm] İşareti belirtilen tahvil oranlarının B14 veya B5 flanşlı gövde bağlantılılar için geçerli olduğunu gösterir. Sign shows that this reduction ratio is valid for geared motor with B14 and B5 flange www.pgr.com.tr 47 0.25 kW P1 [kW] 0.25 48 n2 -1 fB [Min ] M2 [Nm] 2.6 3.0 5.3 6.2 7.1 7.6 8.6 9.6 11.8 13.3 15.1 18.0 20.3 22.8 445 391 304 257 229 170 153 139 118 106 95 96 86 76 0.8 0.9 1.2 1.4 1.6 2.1 2.0 2.2 2.5 2.8 3.1 3.2 3.4 3.7 7.6 213 8.2 9.4 10.7 12.1 15.0 17.2 21.3 24.3 27.5 34.0 39.0 44.9 51.2 57.9 14.0 16.0 18.2 20.6 23.2 26.7 29.7 31.0 33.0 37.8 43.0 48.7 63.2 71.1 81.4 92.6 104.7 136.0 158.0 185.1 209.7 272.0 315.9 iges Tip / Type Kg Sayfa Page mm 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 PSH 2063 - 71M/4A 23 68-69 6.0 8.0 PSH 3050 - 71M/4A 24 66-67 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 PSH 2050 - 71M/4A 19 64-65 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 - - PSH 2040- 71M/4A 12 62-63 FR FA FR GR FA GR [kN] [kN] [kN] [kN] 529.13 464.67 264.14 223.06 195.89 183.60 162.27 144.50 118.23 104.13 92.19 77.40 68.41 60.92 5.0 6.0 7.0 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 9.0 10.0 10.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 0.9 182.08 5.0 8.0 199 137 123 110 91 80 81 71 63 52 46 43 38 33 0.9 1.3 1.4 1.5 1.9 2.1 2.1 2.4 2.4 3.0 3.4 3.6 4.0 4.6 170.00 147.90 129.82 114.75 92.73 80.75 65.25 57.27 50.63 40.91 35.63 30.93 27.15 24.00 5.0 5.0 5.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 5.0 5.0 92 81 72 65 80 52 63 45 51 45 40 35 28 27 23 21 18 14 12 11 9 8 6 1.0 1.1 1.2 1.3 1.2 1.6 1.6 1.8 1.7 1.8 2.0 2.1 2.6 2.9 3.3 3.5 4.0 4.6 5.2 5.0 5.4 6.2 6.9 99.45 86.86 76.38 67.50 59.80 52.00 46.77 44.78 42.08 36.75 32.31 28.56 22.00 19.55 17.08 15.01 13.27 10.22 8.80 7.51 6.63 5.11 4.40 3.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 www.pgr.com.tr 0.37 kW P1 [kW] 0.37 n2 -1 M2 fB 1.1 1577 2.0 1.2 2.1 1454 869 1.4 1.8 iges FR FA FR GR FA GR [kN] [kN] [kN] [kN] 1198.50 27.0 21.0 27.0 1.1 1.8 1173.93 660.60 13.0 16.0 12.0 12.0 1214 979 1.2 1.5 645.00 510.00 14.0 16.0 2.1 5.7 849 362 1.7 3.9 645.00 241.67 1.8 959 0.7 2.1 2.6 4.9 5.8 7.3 8.7 9.9 11.1 12.9 14.5 17.4 20.6 830 671 486 333 275 236 214 195 170 153 153 130 6.1 7.0 7.5 8.4 9.5 11.6 13.1 14.9 17.7 20.0 22.5 27.5 31.2 35.2 39.2 11.9 14.8 17.0 21.0 23.9 27.0 33.5 38.4 44.3 50.4 57.0 [Min ] Sayfa Page mm Tip / Type Kg 28.0 PSH 3125 - 71M/4B 115 82-83 16.0 16.0 16.0 16.0 PSH 3100 - 71M/4B 67 78-79 12.0 12.0 16.0 16.0 16.0 16.0 PSH 2100 - 80M/6A 61 76-77 16.0 16.0 12.0 12.0 16.0 16.0 16.0 16.0 PSH 2100 - 71M/4B 59 76-77 520.20 2.0 9.0 10.0 12.0 PSH 2080 - 80M/6A 36 72-73 0.9 1.1 1.5 2.1 2.4 2.8 3.0 3.2 3.5 3.7 4.3 4.8 656.63 520.20 276.81 234.60 187.00 157.64 138.13 123.58 106.25 94.15 78.83 66.45 5.0 7.0 9.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 11.0 12.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 PSH 2080 - 71M/4B 34 72-73 386 344 256 230 209 177 159 143 144 129 115 96 85 76 73 0.9 1.0 1.4 1.3 1.4 1.7 1.9 2.1 2.1 2.3 2.4 2.7 2.9 3.2 3.6 223.06 195.89 183.60 162.27 144.50 118.23 104.13 92.19 77.40 68.41 60.92 49.84 43.90 38.87 34.94 6.0 7.0 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 10.0 10.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 PSH 2063 - 71M/4B 24 68-69 166 136 121 121 106 95 78 69 65 57 51 1.0 1.2 1.4 1.4 1.6 1.6 2.0 2.2 2.4 2.7 3.1 114.75 92.73 80.75 65.25 57.27 50.63 40.91 35.63 30.93 27.15 24.00 5.0 5.0 5.0 5.0 6.0 6.0 6.0 6.0 5.0 5.0 5.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 7.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 PSH 2050 - 71M/4B 20 64-65 [Nm] İşareti belirtilen tahvil oranlarının B14 veya B5 flanşlı gövde bağlantılılar için geçerli olduğunu gösterir. Sign shows that this reduction ratio is valid for geared motor with B14 and B5 flange www.pgr.com.tr 49 0.37 kW 0.55 kW P1 n2 -1 M2 fB iges FA FR GR FA GR [kN] [kN] [kN] [kN] Tip / Type Kg Sayfa Page mm [kW] [Min ] 0.37 22.9 26.3 29.3 30.6 32.5 37.3 42.4 47.9 62.2 70.0 80.2 91.2 103.2 134.0 155.6 182.3 206.5 267.9 311.2 120 78 95 68 77 68 61 55 42 41 36 32 28 22 19 16 15 11 10 0.8 1.0 1.0 1.2 1.1 1.2 1.3 1.4 1.7 2.0 2.2 2.4 2.6 3.1 3.4 3.5 3.7 4.1 4.6 59.80 52.00 46.77 44.78 42.08 36.75 32.31 28.56 22.00 19.55 17.08 15.01 13.27 10.22 8.80 7.51 6.63 5.11 4.40 3.0 4.0 3.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 - - PSH 2040 - 71M/4B 13 62-63 1.2 1.5 1.8 2.0 2.3 2.6 3.2 3.7 4.3 5.2 2293 1811 1578 1762 1549 1416 1150 998 860 730 1.3 1.7 2.0 1.6 1.7 2.2 2.6 2.6 2.8 3.9 1198.50 928.25 793.81 690.49 607.31 546.92 444.38 380.02 323.00 270.16 25.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 PSH 3125 - 80M/4A 117 82-83 2.1 1263 1.3 660.00 14.0 12.0 16.0 16.0 PSH 3100 - 80M/4A 69 78-79 1.4 1.8 1804 1456 0.8 1.0 645.00 510.00 7.0 13.0 12.0 12.0 16.0 16.0 16.0 16.0 PSH 2100 - 80M/6B 62 76-77 2.2 2.7 5.8 7.6 8.5 10.9 1234 995 526 420 385 314 1.2 1.4 2.7 3.3 3.5 3.9 645.00 510.00 241.67 183.33 165.38 128.85 14.0 16.0 16.0 16.0 16.0 16.0 12.0 12.0 12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 PSH 2100 - 80M/4A 61 76-77 3.9 696 1.0 234.60 7.0 9.0 12.0 12.0 PSH 2080 - 80M/6B 37 72-73 3.5 6.0 7.5 8.9 10.1 11.3 13.2 14.9 17.8 21.1 24.0 26.9 31.3 771 484 400 343 311 283 247 223 222 189 168 151 131 0.9 1.5 1.7 2.0 2.1 2.2 2.4 2.5 3.0 3.3 3.6 3.8 4.2 402.90 234.60 187.00 157.64 138.13 123.58 106.25 94.15 78.83 66.45 58.23 52.10 44.79 6.0 9.0 9.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 11.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 PSH 2080 - 80M/4A 36 72-73 0.55 [Nm] FR İşareti belirtilen tahvil oranlarının B14 veya B5 flanşlı gövde bağlantılılar için geçerli olduğunu gösterir. Sign shows that this reduction ratio is valid for geared motor with B14 and B5 flange 50 www.pgr.com.tr 0.55 kW P1 [kW] 0.55 n2 -1 fB [Min ] M2 [Nm] 7.6 8.6 9.7 11.8 13.4 15.2 18.1 20.5 23.0 28.1 31.9 36.0 40.1 49.0 55.6 62.8 73.6 372 335 304 257 230 208 209 187 167 140 124 111 106 88 78 69 59 1.0 0.9 1.0 1.1 1.3 1.4 1.5 1.6 1.7 1.9 2.0 2.2 2.5 2.8 3.1 3.5 3.6 21.5 24.4 27.7 34.2 39.3 45.3 51.6 58.3 72.2 82.9 94.8 106.5 120.4 149.1 171.1 195.8 176 155 139 114 100 94 84 74 60 52 46 43 38 31 27 24 43.3 49.0 63.6 71.6 82.0 93.3 105.5 137.0 159.1 186.4 211.2 274.0 318.2 87 78 61 59 52 46 40 31 27 24 21 16 14 www.pgr.com.tr iges Tip / Type Kg Sayfa Page mm 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 PSH 2063 - 80M/4A 26 68-69 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 PSH 2050- 80M/4A 22 64-65 - - PSH 2040 - 80M/4A 15 62-63 FR FA FR GR FA GR [kN] [kN] [kN] [kN] 183.60 162.27 144.50 118.23 104.13 92.19 77.40 68.41 60.92 49.84 43.90 38.87 34.94 28.59 25.18 22.29 19.01 6.0 7.0 7.0 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 7.0 7.0 7.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 10.0 10.0 10.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 1.0 1.1 1.1 1.4 1.5 1.6 1.9 2.1 2.4 2.3 2.5 2.8 3.0 3.5 3.8 4.0 65.25 57.27 50.63 40.91 35.63 30.93 27.15 24.00 19.39 16.89 14.77 13.15 11.63 9.39 8.18 7.15 5.0 5.0 5.0 6.0 5.0 5.0 5.0 5.0 5.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 8.0 8.0 8.0 8.0 8.0 7.0 7.0 7.0 6.0 6.0 6.0 5.0 5.0 4.0 4.0 4.0 0.9 1.0 1.2 1.3 1.5 1.6 1.8 2.1 2.3 2.4 2.4 2.8 3.2 32.31 28.56 22.00 19.55 17.08 15.01 13.27 10.22 8.80 7.51 6.63 5.11 4.40 3.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 51 0.75 kW P1 [kW] 0.75 52 n2 -1 M2 fB 1.2 1.5 1.8 2.0 2.3 2.6 3.2 3.7 4.3 5.2 5.9 7.5 3127 2469 2152 2402 2113 1931 1569 1361 1173 995 884 710 1.0 1.3 1.4 1.2 1.3 1.6 1.9 1.9 2.0 2.8 3.1 3.1 1.3 1.9 2747 2034 2.1 Tip / Type Kg Sayfa Page mm 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 PSH 3125 - 80M/4B 118 82-83 27.0 27.0 28.0 28.0 PSH 2125 - 90S/6A 104 80-81 12.0 16.0 16.0 PSH 3100 - 80M/4B 70 78-79 9.0 13.0 16.0 16.0 16.0 16.0 14.0 13.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 PSH 2100 - 80M/4B 62 76-77 234.60 187.00 157.64 138.13 123.58 106.25 94.15 78.83 66.45 58.23 52.10 44.79 37.89 31.94 27.99 25.04 7.0 8.0 9.0 9.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 9.0 9.0 8.0 8.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 12.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 PSH 2080 - 80M/4B 37 72-73 118.23 104.13 92.19 77.40 68.41 60.92 49.84 43.90 38.87 34.94 28.59 25.18 22.29 19.01 15.58 12.75 11.23 9.94 8.48 7.0 7.0 7.0 7.0 7.0 7.0 8.0 8.0 7.0 7.0 7.0 6.0 6.0 6.0 6.0 5.0 5.0 5.0 5.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 7.0 10.0 10.0 10.0 10.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 PSH 2063 - 80M/4B 27 68-69 iges FR FA FR GR FA GR [kN] [kN] [kN] [kN] 1198.50 928.25 793.81 690.49 607.31 546.92 444.38 380.02 323.00 270.16 236.72 187.50 20.0 25.0 26.0 25.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 1.0 1.4 695.60 495.64 25.0 27.0 21.0 21.0 1722 0.9 660.00 9.0 2.2 2.7 5.8 7.6 8.5 10.9 14.9 19.6 1683 1357 717 572 525 428 366 285 0.8 1.0 2.0 2.4 2.5 2.9 2.8 3.1 645.00 510.00 241.67 183.33 165.38 128.85 94.25 71.50 6.0 7.5 8.9 10.1 11.3 13.2 14.9 17.8 21.1 24.0 26.9 31.3 36.9 43.8 50.0 55.9 660 545 468 424 386 337 303 302 258 229 205 179 161 137 122 109 1.1 1.2 1.4 1.5 1.6 1.8 1.8 2.2 2.4 2.6 2.8 3.1 2.8 3.0 3.1 3.3 11.8 13.4 15.2 18.1 20.5 23.0 28.1 31.9 36.0 40.1 49.0 55.6 62.8 73.6 89.9 109.8 124.7 140.8 165.1 351 314 283 285 255 228 191 168 151 145 120 107 95 82 69 57 50 45 39 0.8 0.9 1.0 1.1 1.2 1.2 1.4 1.5 1.6 1.8 2.0 2.3 2.6 2.6 2.7 2.9 3.1 3.3 3.4 [Min ] [Nm] www.pgr.com.tr 0.75 kW 1.10 kW P1 n2 -1 M2 fB iges FA FR GR FA GR [kN] [kN] [kN] [kN] Tip / Type Kg Sayfa Page mm [kW] [Min ] 0.75 34.2 39.3 45.3 51.6 58.3 72.2 82.9 94.8 106.5 120.4 149.1 171.1 195.8 155 137 128 114 101 82 72 63 59 52 42 37 33 1.0 1.1 1.2 1.4 1.5 1.8 1.7 1.8 2.1 2.2 2.6 2.8 2.8 40.91 35.63 30.93 27.15 24.00 19.39 16.89 14.77 13.15 11.63 9.39 8.18 7.15 5.0 5.0 5.0 5.0 5.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 3.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 5.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 PSH 2050 - 80M/4B 23 64-65 63.6 71.6 82.0 93.3 105.5 137.0 159.1 186.4 211.2 274.0 318.2 83 81 71 63 56 43 37 33 29 22 19 0.9 1.0 1.1 1.2 1.3 1.5 1.8 1.7 1.9 2.1 2.4 22.00 19.55 17.08 15.01 13.27 10.22 8.80 7.51 6.63 5.11 4.40 3.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 - - PSH 2040- 80M/4B 16 62-63 1.5 3596 0.9 928.25 18.0 21.0 27.0 28.0 PSH 3125 - 90S/4A 121 82-83 1.9 2951 1.0 495.64 23.0 21.0 27.0 28.0 PSH 2125 - 90L/6B 106 80-81 2.0 2.8 7.0 7.7 8.8 9.7 12.0 14.0 2799 2068 977 898 802 733 622 539 1.0 1.4 2.7 2.9 3.1 3.3 3.6 4.0 695.60 495.64 201.71 182.58 160.58 144.62 117.50 100.48 23.0 27.0 27.0 27.0 27.0 27.0 26.0 25.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 PSH 2125 - 90S/4A 104 80-81 3.4 4.6 5.8 7.7 8.5 10.9 13.6 15.0 19.7 21.9 28.1 33.0 36.5 41.1 1650 1313 1044 833 764 624 518 534 416 380 300 271 244 212 0.8 1.1 1.4 1.6 1.7 2.0 2.3 2.5 2.9 3.1 3.7 3.4 3.5 4.1 410.00 303.85 241.67 183.33 165.38 128.85 103.85 94.25 71.50 64.50 50.25 42.78 38.59 34.29 10.0 14.0 16.0 16.0 16.0 15.0 14.0 14.0 13.0 12.0 12.0 11.0 11.0 10.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 PSH 2100 - 90S/4A 65 76-77 1.10 www.pgr.com.tr [Nm] FR 53 1.10 kW P1 [Min ] M2 fB [kW] n2 -1 [Nm] 1.10 8.9 10.2 11.4 13.3 15.0 17.9 21.2 24.2 27.1 31.5 37.2 44.1 50.4 56.3 65.5 73.9 88.3 100.8 112.6 131.0 681 617 562 491 442 440 376 334 299 260 234 200 177 159 138 122 106 93 84 72 1.0 1.0 1.1 1.2 1.3 1.5 1.7 1.8 1.9 2.1 2.3 2.6 2.9 3.1 3.4 3.6 3.1 3.2 3.4 3.5 28.3 32.1 36.3 40.4 49.3 56.0 63.3 74.2 90.5 110.6 125.6 141.9 166.3 190.5 278 245 220 211 175 156 138 119 101 84 74 66 56 49 58.8 72.7 83.5 95.5 107.2 121.2 150.2 172.4 197.2 93.9 106.3 138.0 160.2 187.7 212.7 275.9 320.5 54 iges Tip / Type Kg Sayfa Page mm 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 PSH 2080 - 90S/4A 40 72-73 10.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 PSH 2063 - 90S/4A 30 68-69 5.0 5.0 5.0 5.0 3.0 3.0 3.0 3.0 3.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 PSH 2050 - 90S/4A 26 64-65 3.0 3.0 3.0 3.0 2.0 2.0 2.0 2.0 - - PSH 2040 - 90S/4A 19 62-63 FR FA FR GR FA GR [kN] [kN] [kN] [kN] 157.64 138.13 123.58 106.25 94.15 78.83 66.45 58.23 52.10 44.79 37.89 31.94 27.99 25.04 21.53 19.08 15.97 13.99 12.52 10.76 7.0 8.0 8.0 9.0 9.0 9.0 10.0 10.0 9.0 9.0 9.0 8.0 8.0 8.0 7.0 7.0 7.0 6.0 6.0 6.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 12.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 0.9 1.0 1.1 1.2 1.4 1.6 1.8 1.8 1.9 2.2 2.4 2.6 3.0 3.2 49.84 43.90 38.87 34.94 28.59 25.18 22.29 19.01 15.58 12.75 11.23 9.94 8.48 7.40 7.0 7.0 7.0 7.0 6.0 6.0 6.0 6.0 5.0 5.0 5.0 5.0 5.0 4.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 7.0 7.0 7.0 7.0 6.0 147 120 104 92 85 75 61 54 47 1.1 1.2 1.1 1.2 1.4 1.5 1.8 2.1 2.2 24.00 19.39 16.89 14.77 13.15 11.63 9.39 8.18 7.15 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 3.0 92 81 63 54 48 43 34 29 0.8 0.9 1.1 1.2 1.2 1.3 1.4 1.6 15.01 13.27 10.22 8.80 7.51 6.63 5.11 4.40 3.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 www.pgr.com.tr 1.50 kW P1 [kW] 1.50 n2 -1 M2 fB [Nm] 2.9 7.0 7.8 8.8 9.8 12.1 14.1 16.2 18.5 20.5 25.2 2800 1323 1216 1085 992 842 730 705 628 566 471 1.0 2.0 2.1 2.3 2.4 2.7 2.9 2.7 2.9 2.9 3.0 [Min ] iges 495.64 201.71 182.58 160.58 144.62 117.50 100.48 87.40 76.88 69.23 56.25 Tip / Type Kg Sayfa Page mm 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 PSH 2125 - 90L/4A 106 80-81 FR FA FR GR FA GR [kN] [kN] [kN] [kN] 23.0 27.0 27.0 27.0 27.0 25.0 24.0 23.0 23.0 22.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 5.1 1592 0.9 183.33 11.0 12.0 16.0 16.0 PSH 2100 - 100L/6A 71 76-77 5.9 7.7 8.6 11.0 13.7 15.1 19.9 22.0 28.3 33.2 36.8 41.4 47.2 58.6 1414 1128 1034 845 702 723 563 514 406 367 331 287 261 213 1.0 1.2 1.3 1.5 1.7 1.8 2.2 2.3 2.7 2.5 2.6 3.0 2.8 3.0 241.67 183.33 165.38 128.85 103.85 94.25 71.50 64.50 50.25 42.78 38.59 34.29 30.06 24.23 13.0 15.0 15.0 14.0 13.0 13.0 12.0 12.0 11.0 11.0 10.0 10.0 10.0 9.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 PSH 2100- 90L/4A 67 76-77 15.1 18.0 21.4 24.4 27.3 31.7 37.5 44.5 50.7 56.7 66.0 74.4 88.9 101.5 113.4 132.0 148.8 188.1 598 596 509 452 405 352 317 271 240 215 187 166 143 126 114 98 87 69 0.9 1.1 1.2 1.3 1.4 1.6 1.7 1.9 2.1 2.3 2.5 2.7 2.2 2.4 2.5 2.6 2.8 2.8 94.15 78.83 66.45 58.23 52.10 44.79 37.89 31.94 27.99 25.04 21.53 19.08 15.97 13.99 12.52 10.76 9.54 7.55 8.0 8.0 9.0 9.0 9.0 9.0 8.0 8.0 8.0 7.0 7.0 7.0 6.0 6.0 6.0 6.0 6.0 5.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 8.0 8.0 8.0 7.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 PSH 2080 - 90L/4A 42 72-73 49.7 56.4 63.7 74.7 91.1 111.4 126.4 142.9 167.5 191.9 237 211 187 161 137 113 100 89 76 67 1.0 1.2 1.3 1.3 1.4 1.6 1.8 1.9 2.2 2.3 28.59 25.18 22.29 19.01 15.58 12.75 11.23 9.94 8.48 7.40 6.0 6.0 6.0 5.0 5.0 5.0 5.0 4.0 4.0 4.0 8.0 8.0 8.0 8.0 7.0 7.0 6.0 6.0 6.0 6.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 PSH 2063 - 90L/4A 32 68-69 84.1 96.1 108.0 122.1 151.2 173.6 198.6 141 125 115 102 83 73 63 0.8 0.9 1.0 1.1 1.3 1.5 1.7 16.89 14.77 13.15 11.63 9.39 8.18 7.15 4.0 4.0 2.0 3.0 3.0 3.0 3.0 4.0 4.0 2.0 2.0 3.0 3.0 3.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 7.0 7.0 7.0 7.0 7.0 PSH 2050 - 90L/4A 28 64-65 www.pgr.com.tr 55 2.20 kW P1 [kW] 2.20 56 n2 -1 M2 fB [Nm] 4.2 7.0 7.7 8.8 9.7 12.0 14.0 16.1 18.3 20.4 25.1 29.3 34.4 39.9 44.4 2968 1954 1796 1564 1465 1243 1078 1042 928 836 696 602 519 463 417 1.0 1.3 1.4 1.6 1.6 1.8 2.0 2.3 2.5 2.3 3.0 3.3 3.5 2.7 2.9 10.9 13.6 15.0 19.7 21.9 28.1 33.0 36.5 41.1 46.9 58.2 68.7 74.4 82.5 86.8 105.9 131.4 155.1 1248 1037 1067 831 759 599 542 489 424 385 314 269 254 229 216 180 145 125 27.1 31.5 37.2 44.1 50.4 56.3 65.5 73.9 88.3 100.8 112.6 131.0 147.8 186.8 74.2 90.5 110.6 125.6 141.9 166.3 190.5 [Min ] iges Tip / Type Kg Sayfa Page mm 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 PSH 2125 - 100L/4A 110 80-81 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 15.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 PSH 2100 - 100L/4A 71 76-77 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 7.0 7.0 7.0 7.0 7.0 6.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 11.0 PSH 2080 - 100L/4A 46 72-73 7.0 5.0 5.0 5.0 5.0 5.0 5.0 11.0 11.0 10.0 10.0 10.0 9.0 9.0 10.0 10.0 10.0 10.0 10.0 9.0 9.0 PSH 2063 - 100L/4A 36 68-69 FR FA FR GR FA GR [kN] [kN] [kN] [kN] 337.55 201.71 182.58 160.58 144.62 117.50 100.48 87.40 76.88 69.23 56.25 48.10 40.98 35.31 31.79 23.0 27.0 27.0 26.0 25.0 24.0 23.0 22.0 21.0 21.0 20.0 19.0 18.0 17.0 17.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 1.0 1.1 1.2 1.5 1.6 1.9 2.0 2.3 2.6 2.5 2.9 3.0 2.2 2.3 3.1 2.6 2.8 3.0 128.85 103.85 94.25 71.50 64.50 50.25 42.78 38.59 34.29 30.06 24.23 20.52 18.94 17.09 16.25 13.31 10.73 9.09 12.0 12.0 11.0 11.0 11.0 10.0 10.0 10.0 9.0 9.0 9.0 8.0 8.0 8.0 8.0 7.0 7.0 7.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 10.0 9.0 11.0 9.0 9.0 8.0 598 521 469 400 355 317 276 245 212 186 168 144 128 102 1.0 1.1 1.2 1.3 1.4 1.5 1.7 1.9 1.6 2.0 2.1 2.4 2.5 2.7 52.10 44.79 37.89 31.94 27.99 25.04 21.53 19.08 15.97 13.99 12.52 10.76 9.54 7.55 8.0 8.0 7.0 7.0 7.0 7.0 7.0 7.0 6.0 6.0 6.0 5.0 5.0 5.0 238 202 167 147 132 112 99 0.9 0.9 1.1 1.2 1.3 1.5 1.6 19.01 15.58 12.75 11.23 9.94 8.48 7.40 5.0 4.0 4.0 4.0 4.0 4.0 4.0 www.pgr.com.tr 3.00 kW P1 [Min ] M2 fB [kW] n2 -1 [Nm] 3.00 7.0 7.7 8.8 9.7 12.0 14.0 16.1 18.3 20.4 25.1 29.3 34.4 39.9 44.4 54.6 63.8 74.9 88.7 109.1 127.6 2664 2449 2186 1998 1695 1470 1421 1265 1139 949 830 708 631 568 467 404 344 297 242 209 1.0 1.0 1.1 1.2 1.3 1.4 1.7 1.8 1.7 2.2 2.4 2.6 2.0 2.1 2.3 2.5 2.6 2.1 2.3 2.5 19.7 21.9 28.1 33.0 36.5 41.1 46.9 58.2 68.7 74.4 82.5 86.8 105.9 131.4 155.1 1133 1035 817 739 666 578 525 428 367 346 313 294 246 198 170 44.1 50.4 56.3 65.5 73.9 88.3 100.8 112.6 131.0 147.8 186.8 545 483 432 376 333 289 253 229 197 174 140 www.pgr.com.tr iges Tip / Type Kg Sayfa Page mm 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 27.0 26.0 PSH 2125 - 100L/4B 113 80-81 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 15.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 PSH 2100 - 100L/4B 74 76-77 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 11.0 11.0 11.0 11.0 11.0 11.0 PSH 2080 - 100L/4B 48 72-73 FR FA FR GR FA GR [kN] [kN] [kN] [kN] 201.71 182.58 160.58 144.62 117.50 100.48 87.40 76.88 69.23 56.25 48.10 40.98 35.31 31.79 25.83 22.09 18.82 15.90 12.92 11.05 24.0 24.0 24.0 24.0 23.0 22.0 21.0 20.0 20.0 19.0 18.0 17.0 17.0 16.0 15.0 15.0 14.0 13.0 13.0 12.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 20.0 17.0 16.0 15.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 26.0 1.1 1.1 1.3 1.5 1.7 1.9 1.9 2.1 2.3 1.6 1.7 2.3 1.9 2.1 2.2 71.50 64.50 50.25 42.78 38.59 34.29 30.06 24.23 20.52 18.94 17.09 16.25 13.31 10.73 9.09 9.0 9.0 9.0 9.0 9.0 9.0 9.0 8.0 8.0 7.0 7.0 8.0 7.0 7.0 6.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 11.0 11.0 8.0 8.0 10.0 8.0 8.0 7.0 1.0 1.1 1.1 1.2 1.4 1.2 1.4 1.5 1.7 1.8 2.0 31.94 27.99 25.04 21.53 19.08 15.97 13.99 12.52 10.76 9.54 7.55 6.0 6.0 6.0 6.0 6.0 5.0 5.0 5.0 5.0 5.0 5.0 8.0 8.0 9.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 57 4.00 kW 5.50 kW P1 [Min ] M2 fB [kW] n2 -1 [Nm] 4.00 9.9 12.2 14.2 16.4 18.6 20.7 25.4 29.7 34.9 40.5 45.0 55.4 64.7 76.0 89.9 110.7 129.4 2627 2229 1933 1868 1664 1498 1247 1079 931 830 747 614 531 452 391 318 275 0.9 1.0 1.1 1.3 1.4 1.3 1.7 1.8 2.0 1.9 2.4 2.6 2.8 2.9 2.4 2.6 2.8 28.5 33.4 37.1 41.7 47.6 59.0 69.7 75.5 83.7 88.0 107.4 133.3 157.3 198.6 1074 971 876 760 691 563 482 455 411 386 324 261 223 177 66.4 74.9 89.5 102.2 114.2 132.9 149.9 189.4 18.8 20.9 25.7 30.0 35.3 40.9 45.5 55.9 65.4 76.8 90.9 99.4 111.8 130.8 153.6 171.2 186.5 198.8 5.50 58 iges Tip / Type Kg Sayfa Page mm 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 27.0 26.0 25.0 PSH 2125 - 112M/4B 122 80-81 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 15.0 15.0 14.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 15.0 PSH 2100 - 112M/4B 83 76-77 7.0 7.0 3.0 4.0 4.0 4.0 5.0 5.0 13.0 13.0 13.0 13.0 12.0 12.0 12.0 11.0 12.0 12.0 9.0 10.0 10.0 10.0 10.0 10.0 PSH 2080 - 112M/4B 57 72-73 21.0 21.0 21.0 21.0 21.0 20.0 19.0 19.0 18.0 17.0 14.0 16.0 13.0 13.0 12.0 12.0 12.0 12.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 26.0 25.0 24.0 23.0 23.0 22.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 25.0 27.0 24.0 24.0 23.0 23.0 22.0 22.0 PSH 2125 - 132S/4C 136 80-81 FR FA FR GR FA GR [kN] [kN] [kN] [kN] 144.62 117.50 100.48 87.40 76.88 69.23 56.25 48.10 40.98 35.31 31.79 25.83 22.09 18.82 15.90 12.92 11.05 21.0 21.0 20.0 19.0 19.0 18.0 18.0 17.0 17.0 16.0 16.0 15.0 14.0 14.0 13.0 12.0 12.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 20.0 19.0 16.0 15.0 14.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 26.0 25.0 1.0 1.1 1.3 1.4 1.5 1.8 1.7 1.8 1.7 1.9 2.1 2.4 2.5 2.6 50.25 42.78 38.59 34.29 30.06 24.23 20.52 18.94 17.09 16.25 13.31 10.73 9.09 7.20 8.0 8.0 8.0 8.0 8.0 8.0 7.0 6.0 6.0 7.0 6.0 6.0 6.0 6.0 12.0 9.0 10.0 12.0 10.0 10.0 10.0 6.0 6.0 9.0 6.0 7.0 6.0 6.0 495 438 380 333 301 259 229 184 1.0 1.0 0.9 1.1 1.1 1.3 1.5 1.6 21.53 19.08 15.97 13.99 12.52 10.76 9.54 7.55 5.0 5.0 4.0 4.0 4.0 5.0 5.0 4.0 2264 2038 1697 1469 1266 1129 1017 836 723 616 532 481 432 374 318 285 262 246 1.0 1.0 1.2 1.3 1.5 1.1 1.8 2.0 2.2 2.5 2.3 2.8 2.8 2.9 3.1 3.3 3.3 3.4 76.88 69.23 56.25 48.10 40.98 35.31 31.79 25.83 22.09 18.82 15.90 14.54 12.92 11.05 9.41 8.44 7.75 7.27 16.0 16.0 16.0 16.0 15.0 15.0 15.0 14.0 14.0 13.0 12.0 12.0 12.0 11.0 11.0 10.0 10.0 10.0 www.pgr.com.tr 5.50 kW 7.50 kW 11.00 kW 9.20 kW 15.00 kW P1 n2 -1 M2 fB iges FA FR GR FA GR [kN] [kN] [kN] [kN] Tip / Type Kg Sayfa Page mm [kW] [Min ] 5.50 48.1 59.6 70.4 76.3 84.6 88.9 108.6 134.7 159.0 200.7 940 766 656 620 559 526 440 355 304 241 1.1 1.3 1.3 0.9 1.3 1.4 1.6 2.0 2.4 2.8 30.06 24.23 20.52 18.94 17.09 16.25 13.31 10.73 9.09 7.20 6.0 6.0 6.0 3.0 4.0 6.0 5.0 6.0 5.0 5.0 7.0 8.0 8.0 3.0 3.0 8.0 4.0 5.0 5.0 5.0 16.0 16.0 16.0 16.0 16.0 16.0 15.0 15.0 14.0 14.0 16.0 16.0 16.0 13.0 14.0 16.0 14.0 14.0 14.0 14.0 PSH 2100 - 132S/4C 97 76-77 30.1 35.4 41.1 45.6 56.1 65.6 77.0 91.2 99.7 112.2 131.2 154.1 171.8 187.1 199.4 1996 1721 1535 1382 1136 982 837 723 654 587 508 432 388 356 334 1.0 1.1 0.8 1.3 1.5 1.6 1.8 1.7 2.1 2.0 2.2 2.3 2.4 2.4 2.5 48.10 40.98 35.31 31.79 25.83 22.09 18.82 15.90 14.54 12.92 11.05 9.41 8.44 7.75 7.27 14.0 14.0 13.0 13.0 13.0 13.0 12.0 11.0 12.0 11.0 10.0 10.0 10.0 10.0 10.0 21.0 20.0 16.0 16.0 16.0 16.0 15.0 11.0 15.0 11.0 11.0 11.0 11.0 11.0 11.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 26.0 26.0 25.0 24.0 23.0 23.0 22.0 22.0 28.0 28.0 28.0 28.0 28.0 27.0 27.0 23.0 26.0 22.0 22.0 22.0 21.0 21.0 21.0 PSH 2125 - 132M/4B 147 80-81 89.2 108.9 135.1 159.5 201.4 714 598 482 413 327 1.0 1.2 1.5 1.8 2.1 16.25 13.31 10.73 9.09 7.20 5.0 2.0 3.0 4.0 5.0 6.0 2.0 3.0 3.0 4.0 16.0 14.0 14.0 14.0 13.0 16.0 11.0 12.0 12.0 12.0 PSH 2100 - 132M/4B 107 76-77 45.6 56.1 65.6 77.0 91.2 99.7 112.2 131.2 154.1 171.8 187.1 199.4 1695 1393 1205 1026 886 802 720 623 530 476 437 410 1.1 1.2 1.3 1.5 1.4 1.7 1.7 2.0 2.1 2.4 2.3 2.3 31.79 25.83 22.09 18.82 15.90 14.54 12.92 11.05 9.41 8.44 7.75 7.27 12.0 12.0 12.0 12.0 10.0 11.0 10.0 10.0 10.0 10.0 9.0 9.0 13.0 14.0 14.0 14.0 9.0 13.0 9.0 10.0 10.0 10.0 10.0 10.0 27.0 27.0 27.0 27.0 25.0 26.0 24.0 24.0 23.0 22.0 22.0 21.0 26.0 26.0 26.0 25.0 20.0 25.0 21.0 21.0 20.0 20.0 20.0 20.0 PSH 2125 - 132M/4 154 80-81 56.1 65.6 77.0 91.2 99.7 112.2 131.2 154.1 171.8 187.1 199.4 1665 1440 1227 1060 959 861 745 634 569 522 490 1.0 1.1 1.2 1.2 1.4 1.4 1.7 1.8 2.0 1.9 1.9 25.83 22.09 18.82 15.90 14.54 12.92 11.05 9.41 8.44 7.75 7.27 11.0 11.0 11.0 8.0 10.0 9.0 9.0 9.0 9.0 9.0 9.0 11.0 12.0 12.0 6.0 12.0 7.0 8.0 8.0 8.0 8.0 9.0 27.0 27.0 27.0 24.0 25.0 24.0 23.0 22.0 22.0 21.0 21.0 24.0 24.0 24.0 18.0 24.0 19.0 19.0 19.0 19.0 19.0 19.0 PSH 2125 - 160M/4B 174 80-81 99.7 112.2 131.2 154.1 171.8 187.1 199.4 1307 1174 1015 865 775 712 668 1.0 1.1 1.2 1.3 1.5 1.4 1.4 14.54 12.92 11.05 9.41 8.44 7.75 7.27 9.0 4.0 5.0 6.0 7.0 7.0 8.0 9.0 3.0 4.0 5.0 6.0 6.0 6.0 24.0 22.0 22.0 21.0 21.0 20.0 20.0 21.0 15.0 16.0 16.0 16.0 17.0 17.0 PSH 2125 - 160L/4A 199 80-81 7.50 9.20 11.00 15.00 www.pgr.com.tr [Nm] FR 59 İKİ - ÜÇ KADEMELİ MOTORLU ÖLÇÜ SAYFALARI DOUBLE - TRIBLE STAGE DIMENSION OF GEARMOTORS PSH 2040 DG PSH 2050 DG ... 2125 DG PSH 2050 TMA ... 2125 TMA www.pgr.com.tr PSH 2040 TMA PSH 3050 DG ... 3125 DG PSH 3050 TMA ... 3125 TMA 61 PSH 2040 PSH 2040 TMA ... (kBre) (k) (o) 170 63 100 80 100 24 Ø20 k6 144 80 20 0,5 (Øg) 11 80 100 20 3 120 11 20 (g1) Ø9 23 j 11 40 40 55 90 110 27 22.5 32 4 6 28 20 87 63 M6 PSH 2040 DG/B5 ... PSH 2040 TMG/B5 ... (k1Bre) (k1) (o) 60 15 60 3 (Øg) 0,5 82 144 1 40 Øb1 j6 Øa1 Øe 75 f1 (g1) Øs1 Øa1 60 3 Ø20 k6 Øb1 j6 170 64 f1 c1 c1 Ø35 22.5 28 28 32 4 6 22.8 Ø20 H7 6 120 M6 a1 b1 c1 120 80 10 160 110 10 f1 s1 100 3 6,6 130 3,5 9 63 M 71 M 80 M 90 S 90 L g 124 140 159 193 193 g1 111 119 127 151 151 k/k1 364/364 388/388 412/412 434/434 454/454 kBre/k1Bre 416/416 448/448 474/474 507/507 527/527 o 194 218 242 264 284 j - - 3 12 12 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. 62 e1 Note: Dimension which is designated by (...) depends on marks of motor. www.pgr.com.tr PSH 2040 PSH 2040 DG/B14 ... (k1Bre) (k1) (g1) (o) 170 60 64 3 60 3 (Øg) 0,5 82 144 90 74 M6x10 Ø75 22.8 Ø20 H7 6 Ø35 120 28 28 PSH 2040 DG/Ç ... 120 114 Ø30 I 15 II Ø20h6 95 I II 136-137 63 M 71 M 80 M 90 S 90 L g 124 140 159 193 193 g1 111 119 127 151 151 k1 364 388 412 434 454 k1Bre 416 448 474 507 527 o 194 218 242 290 310 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. www.pgr.com.tr Note: Dimension which is designated by (...) depends on marks of motor. 63 PSH 2050 PSH 2050 ÇMA ... PSH 2050 TMA ... (kBre) (k) (o) 186 115 (g1) 4 Ø11 Ø25 k6 Ø11 179 35 15 100 80 7,5 (Øg) 30 15 117 115 50 75 40 28 35 40 100 5 65 54 122 8 80 121 M10 PSH 2050 DG/B5 ... PSH 2050 TMG/B5 ... (k1Bre) (k1) (o) 181 198 135 45 c1 71 50 f1 Øe1 39 3 63 63 63 Øa1 Øb1 j6 Ø25 k6 Øa1 Øb1 j6 188 Ø25(30)H7 100 7,5 (Øg) Øs1 f1 c1 (g1) 28.3 (33.3) 28 45 45 5 M10 a1 b1 c1 e1 f1 s1 a1 b1 c1 e1 f1 s1 200 130 12 165 3.5 4 x 11 160 110 10 130 3.5 4x9 63 M 71 M 80 M 90 S 90 L g 124 140 159 193 193 g1 111 119 127 151 151 k/k1 384 / 379 426 / 421 453 / 448 476 / 471 496 / 491 kBre/k1Bre 436 / 431 486 / 481 515 / 510 549 / 544 569 / 564 o 198 240 267 290 310 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. 64 40 8 Ø45 8(8) Ø25(30)H7 132 Note: Dimension which is designated by (...) depends on marks of motor. www.pgr.com.tr PSH 2050 PSH 2050 DG/B14 ... (k1Bre) (k1) (g1) 66 3 3 188 Ø45 66 100 7,5 (Øg) Ø115 Ø95 j6 (o) 181 Ø132 Ø25(30)H7 Ø45 8(8) 28.3 (33.3) 6 45 PSH 2050 DG/Ç ... PSH 2050 DG/KS ... II 6 Ø45 Ø25(30)H7 60 3 3 68 30(30) Ø100 I 35(40) Ø25(30)h6 Ø25(30)h6 110 60 Ø25(30)h6 Ø25(30)H7 II 60 PSH 2050 DG/KS-KK ... 170 (175) Ø38(40) I 3 60 45 20 132 125 3 132 M8x13 71 136-137 Konik sıktırma / Shrink disc Altıköşe başlı civata / Hexagonal screw 132 DIN 931 / DIN 933* 10.9Vz Tip/Type Mamax (Nm) sh6 s f6 dxl Zs MA (Nm) KS 25/35 182 2.8 2.3 M5x25 8 7 KS 30/40 182 5.4 4.7 M6x35* 8 12 63 M 71 M 80 M 90 S 90 L g 124 140 159 193 193 g1 111 119 127 151 151 k1 379 421 448 471 491 k1Bre 431 481 510 544 564 o 198 240 267 290 310 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. www.pgr.com.tr Note: Dimension which is designated by (...) depends on marks of motor. 65 PSH 3050 PSH 3050 TMA ... PSH 3050 ÇMA ... (kBre) (k) 186 115 (o) 58 50 (g1) 75 115 4 Ø25 k6 179 Ø11 100 (Øg) j 35 15 117 80 37,5 30 15 Ø11 40 28 35 5 65 100 54 122 8 80 121 40 M10 PSH 3050 DG/B5 ... PSH 3050 TMG/B5 ... (k1Bre) (k1) 181 58 198 135 45 (o) c1 f1 71 50 Øe1 39 3 63 63 c1 (g1) 45 45 5 M10 a1 b1 c1 e1 f1 s1 a1 b1 c1 e1 f1 s1 200 130 12 165 3.5 4 x 11 160 110 10 130 3.5 4x9 63 M 71 M g 124 140 g1 111 119 k/k1 442 / 437 484 / 479 kBre/k1Bre 494 / 489 544 / 539 o 198 240 j 2.5 10 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. 66 40 8 Ø45 Ø25(30)H7 8(8) 28.3 (33.3) 28 Øa1 f1 63 132 Øb1 j6 Ø25 k6 Øa1 Øb1 j6 Ø25(30)H7 188 (Øg) 37,5 100 Øs1 Note: Dimension which is designated by (...) depends on marks of motor. www.pgr.com.tr PSH 3050 PSH 3050 DG/B14 ... (k1Bre) (k1) (o) 58 Ø25(30)H7 Ø45 8(8) 28.3 (33.3) 45 PSH 3050 DG/Ç ... PSH 3050 DG/KS ... 6 60 Ø100 Ø45 Ø25(30)H7 3 3 68 30(30) Ø25(30)h6 Ø25(30)H7 35(40) Ø25(30)h6 Ø25(30)h6 II 60 PSH 3050 DG/KS-KK ... 60 110 I 3 60 170 (175) Ø38(40) II 3 45 20 I 3 188 (Øg) 37,5 100 6 132 132 125 66 3 M8x13 71 66 Ø45 (g1) Ø132 Ø115 Ø95 j6 181 136-137 Konik sıktırma / Shrink disc 132 Altıköşe başlı civata / Hexagonal screw DIN 931 / DIN 933* 10.9Vz Tip/Type Mamax (Nm) sh6 s f6 dxl Zs MA (Nm) KS 25/35 182 2.8 2.3 M5x25 8 7 KS 30/40 182 5.4 4.7 M6x35* 8 12 63 M 71 M g 124 140 g1 111 119 k1 437 479 k1Bre 489 539 o 198 240 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. www.pgr.com.tr Note: Dimension which is designated by (...) depends on marks of motor. 67 PSH 2063 PSH 2063 TMA ... PSH 2063 ÇMA ... (kBre) (k) (o) 201 134 (g1) 80 134 60 5 Ø30 k6 Ø11 193,5 (Øg) 13 j 35 17 141 100 112 40 17 Ø11 40 33 45 100 141 50 110 5 79 138 8 65 M10 PSH 2063 TMG/B5... PSH 2063 DG/B5 ... (k1Bre) (k1) (o) 197 226 156 45 c1 f1 76 60 Øe1 38 (g1) 4 70 70 Øa1 Øb1 j6 5 8 50 50 M10 a1 b1 c1 e1 f1 s1 a1 b1 c1 e1 f1 s1 200 130 12 165 3.5 4 x 11 200 130 12 165 3.5 4 x 11 63 M 71 M 80 M 90 S 90 L 100 L g 124 140 159 193 193 217 g1 111 119 127 151 151 160 k/k1 399 / 395 441 / 437 468 / 464 491 / 487 511 / 507 539 / 535 kBre/k1Bre 451 / 447 501 / 497 530 / 526 564 / 560 584 / 580 620 / 616 o 198 240 267 290 310 338 j _ _ _ _ _ 2.5 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. 68 c1 33 Ø50 8(10) Ø30(35)H7 50 f1 70 148 33.3 (38.3) Ø30 k6 Øa1 Øb1 j6 Ø30(35)H7 206.5 121 13 (Øg) Øs1 Note: Dimension which is designated by (...) depends on marks of motor. www.pgr.com.tr PSH 2063 PSH 2063 DG/B14 ... (k1Bre) (k1) 197 (o) Ø140 (g1) Ø30(35)H7 Ø50 8(10) 7 50 148 20(24.5) 141(140) II 67 7 Ø50 Ø30(35)H7 67 3 4 68 30(40) Ø100 I 40(45) Ø30(35)h6 Ø30(35)h6 125(120) 67 Ø30(35)h6 Ø30(35)H7 II 3 67 PSH 2063 DG/KS-KK ... 190 (195) Ø40(45) I 4 50 PSH 2063 DG/KS ... PSH 2063 DG/Ç ... 4 3 148 33.3 (38.3) 74 206.5 (Øg) 13 121 M8x13 76 74 Ø50 Ø95 j6 Ø115 136-137 Konik sıktırma / Shrink disc Altıköşe başlı civata / Hexagonal screw 132 DIN 931 / DIN 933* 10.9Vz Tip/Type Mamax (Nm) sh6 s f6 dxl Zs MA (Nm) KS 30/40 383 2.6 2.2 M6x35* 8 12 KS 35/46 383 3.0 3.2 M6x35* 10 12 63 M 71 M 80 M 90 S 90 L 100 L g 124 140 159 193 193 217 g1 111 119 127 151 151 160 k1 395 437 464 487 507 535 k1Bre 447 497 526 560 580 616 o 198 240 267 290 310 338 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. www.pgr.com.tr Note: Dimension which is designated by (...) depends on marks of motor. 69 PSH 3063 PSH 3063 TMA ... PSH 3063 ÇMA ... (kBre) (k) 201 58 134 (o) (g1) 80 60 5 Ø30 k6 Ø11 193.5 112 (Øg) j 17 35 100 43 40 17 141 134 Ø11 40 33 45 5 110 79 138 8 100 141 50 65 M10 PSH 3063 DG/B5 ... PSH 3063 TMG/B5 ... (k1Bre) (k1) 197 226 156 45 (o) 58 c1 f1 76 60 Øe1 38 (g1) 4 70 70 Øa1 Øb1 j6 Ø30 k6 Øa1 Øb1 j6 Ø30(35)H7 206.5 (Øg) 121 43 Øs1 f1 70 c1 33.3 (38.3) Ø30(35)H7 33 50 50 5 M10 a1 b1 c1 e1 f1 s1 a1 b1 c1 e1 f1 s1 200 130 12 165 3.5 4 x 11 200 130 12 165 3.5 4 x 11 63 M 71 M g 124 140 g1 111 119 k/k1 457 / 453 499 / 495 kBre/k1Bre 509 / 505 559 / 555 o 198 240 j _ 3.5 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. 70 50 8 Ø50 8(10) 148 Note: Dimension which is designated by (...) depends on marks of motor. www.pgr.com.tr PSH 3063 PSH 3063 DG/B14 ... (k1Bre) (k1) 58 (o) (g1) Ø140 Ø30(35)H7 Ø50 8(10) 33.3 (38.3) 50 PSH 3063 DG/Ç ... Ø50 Ø30(35)H7 67 7 67 3 4 68 30(40) Ø100 Ø30(35)h6 II 40(45) 67 Ø30(35)h6 Ø30(35)H7 Ø40(45) Ø30(35)h6 I 67 PSH 3063 DG/KS-KK ... 190 (195) 125(120) 3 50 PSH 3063 DG/KS ... 148 20(24.5) 141(140) II 4 Ø50 7 148 I 4 3 M8x13 76 74 206.5 121 (Øg) 43 Ø115 74 Ø95 j6 197 136-137 Konik sıktırma / Shrink disc 132 Altıköşe başlı civata / Hexagonal screw DIN 931 / DIN 933* 10.9Vz Tip/Type Mamax (Nm) sh6 s f6 dxl Zs MA (Nm) KS 30/40 383 2.6 2.2 M6x35* 8 12 KS 35/46 383 3.0 3.2 M6x35* 10 12 63 M 71 M g 124 140 g1 111 119 k1 453 495 k1Bre 505 555 o 198 240 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. www.pgr.com.tr Note: Dimension which is designated by (...) depends on marks of motor. 71 PSH 2080 PSH 2080 TMA ... PSH 2080 ÇMA ... (kBre) (k) (o) 242 160 (g1) 160 70 100 6 Ø14 140 229 (Øg) 19 130 40 21 171 40 Ø35 k6 21 Ø14 40 38 60 130 179 60 130 5 95 80 10 160 M12 PSH 2080 DG/B5 ... PSH 2080 TMG/B5 ... (k1Bre) (k1) (o) 243 263 184 53 c1 f1 102 70 Øe1 44 5 (g1) 79 79 Øa1 Øb1 j6 Ø35 k6 Øa1 Øb1 j6 254 Ø40(45)H7 146 19 (Øg) Øs1 f1 79 c1 Ø65 38 55 7 55 M12 a1 b1 c1 e1 f1 s1 250 180 15 215 4 4 x 14 a1 b1 c1 e1 f1 s1 4 x 14 200 130 12 165 3.5 4 x 11 230 300 265 20 4 63 M 71 M 80 M 90 S 90 L 100 L 112 M g 124 140 159 193 193 217 232 g1 111 119 127 151 151 160 168 k/k1 440 / 441 482 / 483 509 / 510 532 / 533 552 / 553 580 / 581 625 / 626 kBre/k1Bre 492 / 493 542 / 543 571 / 572 605 / 606 625 / 626 661 / 662 705 / 706 o 198 240 267 290 310 338 383 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. 72 56 10 43.3 (48.8) Ø40(45)H7 12(14) 168 Note: Dimension which is designated by (...) depends on marks of motor. www.pgr.com.tr PSH 2080 PSH 2080 DG/B14 ... (k1Bre) (k1) 243 (o) Ø192 (g1) 84 5 5 254 Ø65 Ø130 j6 84 146 19 (Øg) Ø165 M10x16 Ø40(45)H7 Ø65 43.3 (48.8) 9 55 PSH 2080 DG/Ç ... 25(26) II 9 Ø65 Ø40(45)H7 75 4 5 77 40(40) Ø137 I 50(50) Ø40(45)h6 Ø40(45)h6 135 75 Ø40(45)h6 II 75 PSH 2080 DG/KS-KK ... 220 (220) Ø40(45)H7 I 4 75 55 PSH 2080 DG/KS ... Ø55(60) 168 156 4 168 12(14) 102 136-137 Konik sıktırma / Shrink disc Altıköşe başlı civata / Hexagonal screw 132 DIN 931 / DIN 933* 10.9Vz MA Zs dxl (Nm) Tip/Type Mamax (Nm) sh6 s f6 KS 40/55 779 3.0 2.6 M8x40 8 30 KS 45/55 779 4.1 3.8 M8x40 8 30 63 M 71 M 80 M 90 S 90 L 100 L 112 M g 124 140 159 193 193 217 232 g1 111 119 127 151 151 160 168 k1 441 483 510 533 553 581 626 k1Bre 493 543 572 606 626 662 706 o 198 240 267 290 310 338 383 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. www.pgr.com.tr Note: Dimension which is designated by (...) depends on marks of motor. 73 PSH 3080 PSH 3080 ÇMA ... PSH 3080 TMA ... (kBre) (k) 242 (o) 58 160 (g1) 100 160 70 6 229 21 Ø14 140 (Øg) 49 130 40 171 40 Ø35 k6 21 Ø14 40 38 60 5 95 130 80 160 10 60 130 179 M12 PSH 3080 DG/B5 ... PSH 3080 TMG/B5... (k1Bre) (k1) 243 58 263 184 53 (o) c1 f1 102 70 44 5 79 79 79 (g1) Øa1 Øb1 j6 Ø35 k6 Øa1 Øb1 j6 Ø40(45)H7 254 Øe1 f1 c1 43.3 (48.8) Ø40(45)H7 168 38 55 55 7 M12 a1 b1 c1 e1 f1 s1 250 180 15 215 4 4 x 14 a1 b1 c1 e1 f1 s1 300 230 20 265 4 4 x 14 200 130 12 165 3.5 4 x 11 63 M 71 M g 124 140 g1 111 119 k/k1 498 / 499 540 / 541 kBre/k1Bre 550 / 551 600 / 601 o 198 240 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. 74 56 10 Ø65 12(14) 146 49 (Øg) Øs1 Note: Dimension which is designated by (...) depends on marks of motor. www.pgr.com.tr PSH 3080 PSH 3080 DG/B14 ... (k1Bre) (k1) 58 243 (o) (g1) Ø192 102 Ø40(45)H7 Ø65 12(14) 43.3 (48.8) 55 PSH 3080 DG/Ç ... PSH 3080 DG/KS ... Ø65 Ø40(45)H7 9 75 4 5 77 40(40) Ø137 Ø40(45)h6 II 50(50) 75 Ø40(45)h6 Ø40(45)H7 Ø55(60) Ø40(45)h6 I 75 PSH 3080 DG/KS-KK ... 220 (220) 135 4 75 55 25(26) II 5 254 9 168 I 5 4 M10x16 168 156 84 Ø65 Ø130 j6 146 (Øg) 49 Ø165 84 136-137 Konik sıktırma / Shrink disc 132 Altıköşe başlı civata / Hexagonal screw DIN 931 / DIN 933* 10.9Vz Tip/Type Mamax (Nm) sh6 s f6 dxl Zs MA (Nm) KS 40/55 779 3.0 2.6 M8x40 8 30 KS 45/55 779 4.1 3.8 M8x40 8 30 63 M 71 M g 124 140 g1 111 119 k1 499 541 k1Bre 551 601 o 198 240 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. www.pgr.com.tr Note: Dimension which is designated by (...) depends on marks of motor. 75 PSH 2100 PSH 2100 TMA ... PSH 2100 ÇMA ... (kBre) (k) (o) 290 195 (g1) 195 90 125 5 Ø18 180 293 (Øg) 24 135 70 29 184 48 Ø45 k6 26 Ø18 50 75 135 186 48.5 80 150 5 120 100 14 190 M16 PSH 2100 DG/B5 ... PSH 2100 TMG/B5 ... (k1Bre) (k1) 287 (o) 328 232 57 c1 f1 123 90 Øe1 48 5 (g1) 96 96 96 Øa1 Øb1 j6 Ø45 k6 Øa1 Øb1 h6 316 Ø50(60)H7 182 24 (Øg) Øs1 f1 c1 Ø85 48.5 70 80 5 14 53.8 (64.4) Ø50(60)H7 14(18) 202 70 M16 a1 b1 c1 e1 f1 s1 a1 b1 c1 e1 f1 s1 350 250 20 300 5 4 x 18 250 180 16 215 4 4 x 14 71 M 80 M 90 S 90 L 100 L 112 M 132 S 132 M g 140 159 193 193 217 232 279 279 g1 119 127 151 151 160 168 182 182 k/k1 526 / 523 552 / 549 575 / 572 595 / 592 623 / 620 668 / 665 675 / 672 710 / 707 kBre/k1Bre 586 / 583 614 / 611 648 / 645 668 / 665 704 / 701 748 / 745 783 / 780 818 / 815 o 236 262 285 305 333 378 385 420 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. 76 Note: Dimension which is designated by (...) depends on marks of motor. www.pgr.com.tr PSH 2100 PSH 2100 DG/B14 ... (k1Bre) (k1) (g1) 101 5 5 316 Ø85 101 182 24 (Øg) Ø215 M12x20 Ø50(60)H7 Ø85 14(18) 53.8 (64.4) PSH 2100 DG/Ç ... II 4 92 9 70 PSH 2100 DG/KS-KK ... 92 Ø85 Ø50(60)H7 92 4 5 101 50(60) Ø190 Ø50(60)H7 55(70) Ø50(60)h6 Ø50(60)h6 165(155) I 70 255 (265) Ø65(75) II 9 PSH 2100 DG/KS 26(30) 202 190(185) I 4 92 202 Ø50(60)h6 123 Ø180 j6 (o) 287 Ø238 136-137 Konik sıktırma / Shrink disc 132 Altıköşe başlı civata / Hexagonal screw DIN 931 / DIN 933* 10.9Vz Tip/Type Mamax (Nm) sh6 s f6 dxl Zs MA (Nm) KS 50/62 1604 2.7 2.6 M8x40 10 30 KS 60/76 1604 5.1 4.7 M10x50 10 59 71 M 80 M 90 S 90 L 100 L 112 M 132 S 132 M g 140 159 193 193 217 232 279 279 g1 119 127 151 151 160 168 182 182 k1 523 549 572 592 620 665 672 707 k1Bre 583 611 645 665 701 745 780 815 o 236 262 285 305 333 378 385 420 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. www.pgr.com.tr Note: Dimension which is designated by (...) depends on marks of motor. 77 PSH 3100 PSH 3100 TMA ... PSH 3100 ÇMA ... (kBre) (k) 290 60 195 (o) 90 (g1) 125 195 5 293 Ø18 180 (Øg) 74 29 70 135 184 48 Ø45 k6 26 Ø18 50 48.5 80 5 150 120 190 14 75 135 186 100 M16 PSH 3100 DG/B5 ... PSH 3100 TMG/B5 ... (k1Bre) (k1) 287 60 328 232 57 (o) c1 f1 123 90 Øe1 48 5 96 96 Øa1 Øb1 j6 Ø45 k6 Øa1 Øb1 h6 Ø50(60)H7 316 (Øg) 182 74 Øs1 f1 96 c1 (g1) 53.8 (64.4) Ø50(60)H7 70 5 14 70 M16 a1 b1 c1 e1 f1 s1 a1 b1 c1 e1 f1 s1 350 250 20 300 5 4 x 18 250 180 16 215 4 4 x 14 63 M 71 M 80 M 90 S 90 L g 124 140 159 193 193 g1 111 119 127 151 151 k/k1 548 / 545 590 / 587 617 / 614 640 / 637 660 / 657 kBre/k1Bre 600 / 597 650 / 647 679 / 676 713 / 710 733 / 730 o 198 240 267 290 310 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. 78 80 48.5 Ø85 14(18) 202 Note: Dimension which is designated by (...) depends on marks of motor. www.pgr.com.tr PSH 3100 PSH 3100 DG/B14 ... (k1Bre) (k1) Ø238 (g1) 101 101 5 5 182 123 Ø85 316 (Øg) 74 Ø215 M12x20 9 53.8 (64.4) Ø50(60)H7 14(18) Ø85 202 70 PSH 3100 DG/Ç ... II Ø85 Ø50(60)H7 92 4 5 101 50(60) Ø190 I 55(70) Ø50(60)h6 Ø50(60)h6 165(155) 92 Ø50(60)h6 Ø50(60)H7 II 9 PSH 3100 DG/KS-KK ... 255 (265) Ø65(75) I 4 92 70 PSH 3100 DG/KS 26(30) 202 190(185) 4 92 Ø180 j6 (o) 60 287 136-137 Konik sıktırma / Shrink disc Altıköşe başlı civata / Hexagonal screw 132 DIN 931 / DIN 933* 10.9Vz Tip/Type Mamax (Nm) sh6 s f6 dxl Zs MA (Nm) KS 50/62 1604 2.7 2.6 M8x40 10 30 KS 60/76 1604 5.1 4.7 M10x50 10 59 63 M 71 M 80 M 90 S 90 L g 124 140 159 193 193 g1 111 119 127 151 151 k1 545 587 614 637 657 k1Bre 597 647 676 710 730 o 198 240 267 290 310 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. www.pgr.com.tr Note: Dimension which is designated by (...) depends on marks of motor. 79 PSH 2125 PSH 2125 TMA ... PSH 2125 ÇMA ... (kBre) (k) (o) 354 255 (g1) 150 255 120 8 Ø22 225 356 (Øg) 39 180 82 36 241 60 Ø60 m6 31 Ø22 70 64 92 180 244 200 100 10 155 130 18 250 M20 PSH 2125 DG/B5 ... PSH 2125 TMG/B5 ... (k1Bre) (k1) 426 307 60 c1 f1 (o) 354 151 120 224 Øa1 Øe1 50 6 119 119 f1 119 c1 (g1) 64.4 (74.9) a1 64 89 b1 c1 400 300 450 350 100 10 18 Ø95 Ø60(70)H7 18(20) 250 M20 89 e1 f1 s1 20 350 5 4 x 18 a1 b1 c1 e1 f1 s1 22 400 5 8 x 18 350 250 20 300 5 4 x 18 90 S 90 L 100 L 112 M 132 S 132 M 160 M/L g 193 193 217 232 279 279 323 g1 151 151 160 168 182 182 200 k/k1 619 / 619 639 / 639 667 / 667 712 / 712 719 / 719 754 / 754 859 / 859 kBre/k1Bre 692 / 692 712 / 712 748 / 748 792 / 792 827 / 827 862 / 862 1011 / 1011 o 265 285 313 358 365 400 505 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. 80 Øb1 h6 Ø60 m6 Øa1 Øb1 h6 Ø60(70)H7 388 39 (Øg) Øs1 Note: Dimension which is designated by (...) depends on marks of motor. www.pgr.com.tr PSH 2125 PSH 2125 DG/B14 ... (k1Bre) (k1) (o) 354 Ø292 6 6 388 (Øg) 125 224 39 125 Ø95 Ø230 j6 (g1) Ø265 M12x20 Ø60(70)H7 Ø95 10 89 64.4 (74.9) PSH 2125 DG/Ç ... PSH 2125 DG/KS ... II Ø95 Ø60(70)H7 115 4 6 111 60(70) Ø238 I 60(80) Ø60(70h6 Ø60(70)h6 205 115 Ø60(70)h6 Ø60(70)H7 II 10 PSH 2125 DG/KS-KK ... 315 (330) Ø75(95) I 4 115 89 30 250 235 4 115 250 18(20) 151 136-137 Konik sıktırma / Shrink disc Altıköşe başlı civata / Hexagonal screw 132 DIN 931 / DIN 933* 10.9Vz Tip/Type Mamax (Nm) sh6 s f6 dxl Zs MA (Nm) KS 60/76 3120 2.6 2.4 M10x50 10 59 KS 70/90 3120 4.4 4.1 M12x70* 10 100 90 S 90 L 100 L 112 M 132 S 132 M 160 M/L g 193 193 217 232 279 279 323 g1 151 151 160 168 182 182 200 k1 619 639 667 712 719 754 859 k1Bre 692 712 748 792 827 862 1011 o 265 285 313 358 365 400 505 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. www.pgr.com.tr Note: Dimension which is designated by (...) depends on marks of motor. 81 PSH 3125 PSH 3125 TMA ... PSH 3125 ÇMA ... (kBre) (k) 354 255 (o) 69 120 (g1) 150 255 8 356 Ø22 225 (Øg) 100 36 82 180 241 60 Ø60 m6 31 Ø22 70 64 92 10 200 155 130 250 18 180 244 100 M20 PSH 3125 DG/B5 ... PSH 3125 TMG/B5 ... (k1Bre) (k1) 354 426 307 60 (o) 69 c1 151 120 f1 Øe1 50 6 119 119 Øa1 Øb1 h6 Ø60 m6 Øa1 Øb1 h6 Ø60(70)H7 388 (Øg) 100 224 Øs1 f1 119 c1 (g1) 64.4 (74.9) a1 Ø60(70)H7 64 89 b1 c1 400 300 450 350 89 10 M20 e1 f1 s1 20 350 5 4 x 18 a1 b1 c1 e1 f1 s1 22 400 5 8 x 18 350 250 20 300 5 4 x 18 71 M 80 M 90 S 90 L 100 L g 140 159 193 193 217 g1 119 127 151 151 160 k/k1 659 / 659 685 / 685 708 / 708 728 / 728 756 / 756 kBre/k1Bre 719 / 719 747 / 747 781 / 781 801 / 801 837 / 837 o 236 262 285 305 333 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. 82 100 18 Ø95 18(20) 250 Note: Dimension which is designated by (...) depends on marks of motor. www.pgr.com.tr PSH 3125 PSH 3125 DG/B14 ... (k1Bre) (k1) 354 (o) 69 Ø292 (g1) 125 125 6 6 388 Ø95 Ø230 j6 224 (Øg) 100 Ø265 4 4 115 115 M12x20 151 10 64.4 (74.9) Ø60(70)H7 18(20) Ø95 250 89 89 PSH 3125 DG/KS ... PSH 3125 DG/Ç ... 30 II Ø95 Ø60(70)H7 115 4 6 111 60(70) Ø238 I 60(80) Ø60(70)h6 Ø60(70)h6 205 115 Ø60(70)h6 II Ø60(70)H7 I PSH 3125 DG/KS-KK ... 315 (330) Ø75(95) 250 235 10 136-137 Konik sıktırma / Shrink disc Altıköşe başlı civata / Hexagonal screw 132 DIN 931 / DIN 933* 10.9Vz Tip/Type Mamax (Nm) sh6 s f6 dxl Zs MA (Nm) KS 60/76 3120 2.6 2.4 M10x50 10 59 KS 70/90 3120 4.4 4.1 M12x70* 10 100 71 M 80 M 90 S 90 L 100 L g 140 159 193 193 217 g1 119 127 151 151 160 k1 659 685 708 728 756 k1Bre 719 747 781 801 837 o 236 262 285 305 333 Not: (...) İşaretli olan ölçüler motor markasına göre farklılık gösterir. www.pgr.com.tr Note: Dimension which is designated by (...) depends on marks of motor. 83 W VE IEC ADAPTÖRÜ SEÇİM TABLOLARI SELECTION OF W AND IEC ADAPTERS PSH İKİ KADEME PSH ÜÇ KADEME www.pgr.com.tr 85 TEKNİK AÇIKLAMALAR TECHNICAL EXPLANATIONS W ve IEC adaptörü için performans tablolarının yapısı Notify about performance tables for W and IEC adapter type PSH 2063 Redüktör Tipi / Gear unit type Motor gövde büyüklüğü ile IEC gövde büyüklüğü aynı olan IEC montajlı redüktörler için Servis faktörü f B motor seçim sayfalarından alınabilir. IEC motor büyüklükleri ve IEC standart çıkışları DIN 50347’ e göredir. Service factor f B could be seen from selection of geared motor tables. Because this value is same for geared motor and geared motor with IEC adapters. Tip Tahvil Helisel Sonsuz Reduction Helical Worm İ1 Z2/Z1 iges Type 626.57* 529.13* 464.67* PSH 2063 12.29 10.38 9.11 51/1 51/1 51/1 W n1= 1400 min Mamax P1max n 2 f B=1 f B According to DIN EN 50347 IEC motor sizes. -1 IEC ƞ fB 1 [min ] -1 [Nm] [kW] [%] 2.2 2.7 3.0 360 360 360 0.17 0.20 0.23 48 49 49 . . . 165.1 189.2 . . . 166 156 2.20 2.20 89 90 63* 63 63 P1max hesaplanırken italik olan değerlerde fB >1 alınmıştır. P1max value which is italic, is calculated when service factor f B is greater than one. Tip W azami tahrik gücü hesaplanırken italik olmayan değerler alınmıştır. P1max ile fB = 1 P1max value which is non-italic is calculated when service factor f B is equal to one. Max.çıkış momenti Max.output torque while service factor f B = 1 DIN 42677' ye göre IEC Adaptöre Bağlanacak Motor Boyutu 45 - 59 According to DIN 42677 IEC motor power depend on pole number of motor. 71* 71* 71* Yıldız işareti : Dikkat Tip W sütunundaki P 1max değerlerini aşmamalıdır. Star sign is shown precautions which is value of P1max must be greater than drive power. 63 63 Rakamlı alanlar IEC adaptörünün, IEC motor büyüklüğü ve tahvil oranına uygun olduğunu belirtir. This area which is colorless is shown IEC adapter is applicable for this IEC motor size and reduction ratio Çıkış Devri Output speed Redüktör Tahvili Reduction ratio Redüktör Tipi Gear unit type www.pgr.com.tr 87 W - IEC Tip Tahvil Helisel Sonsuz Reduction Helical Worm W Mamax P1max n 2 Type PSH 2040 W mm 108...114 + IEC mm 118...124 iges 304.20 237.90 128.70 115.23 100.65 99.45 86.86 76.38 67.50 59.80 52.00 46.77 44.78 42.08 36.75 32.31 28.56 22.00 19.55 17.08 15.01 13.27 10.22 8.80 7.51 6.63 5.11 4.40 İ1 7.80 6.10 7.80 2.95 6.10 2.55 2.23 1.96 1.73 7.80 1.33 6.10 1.15 2.55 2.23 1.96 1.73 1.33 2.55 2.23 1.96 1.73 1.33 1.15 1.96 1.73 1.33 1.15 f B=1 Z2/Z1 39/1 39/1 33/2 39/1 33/2 39/1 39/1 39/1 39/1 23/3 39/1 23/3 39/1 33/2 33/2 33/2 33/2 33/2 23/3 23/3 23/3 23/3 23/3 23/3 23/6 23/6 23/6 23/6 n1= 1400 min f B -1 [min ] [Nm] [kW] 4.6 5.9 10.9 12.1 13.9 14.1 16.1 18.3 20.7 23.4 26.9 29.9 31.3 33.3 38.1 43.3 49.0 63.6 71.6 82.0 93.3 105.5 137.0 159.1 186.4 211.2 274.0 318.2 100 100 100 94 100 92 87 85 82 100 81 100 81 85 81 78 75 73 80 78 75 73 68 65 57 54 48 46 0.10 0.12 0.17 0.22 0.21 0.25 0.27 0.30 0.32 0.31 0.39 0.40 0.45 0.42 0.45 0.49 0.53 0.66 0.74 0.83 0.89 0.98 1.10 1.10 1.10 1.10 1.10 1.10 -1 ƞ W n1= 930 min Mamax P1max n 2 1 f B =1 f B -1 IEC ƞ fB 1 [%] -1 [min ] [Nm] [kW] [%] 49 50 68 53 68 54 54 55 56 78 58 79 59 71 72 72 73 74 81 81 82 82 83 83 87 87 88 88 3.1 3.9 7.2 8.1 9.2 9.4 10.7 12.2 13.8 15.6 17.9 19.9 20.8 22.1 25.3 28.8 32.6 42.3 47.6 54.4 62.0 70.1 91.0 105.7 123.8 140.3 182.0 211.4 104 106 104 101 106 99 95 93 91 104 91 106 92 92 88 85 83 82 86 85 82 81 77 74 62 60 54 52 0.07 0.09 0.12 0.17 0.15 0.19 0.20 0.22 0.24 0.22 0.31 0.28 0.36 0.30 0.33 0.36 0.40 0.50 0.54 0.61 0.66 0.73 0.73 0.73 0.73 0.73 0.73 0.73 48 49 67 51 67 52 52 53 54 78 55 78 56 70 70 71 71 72 80 80 81 81 82 82 86 86 87 87 63* 63* 63* 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 45 - 59 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80 80 80 80 80 80 80 80 80 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* IEC bağlantısı yoktur - No IEC assembling on empty fields 88 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr W - IEC Tahvil Tip W Helisel Sonsuz Reduction Helical Worm PSH 2040 W mm 108...114 + IEC mm 118...124 iges 304.20 237.90 128.70 115.23 100.65 99.45 86.86 76.38 67.50 59.80 52.00 46.77 44.78 42.08 36.75 32.31 28.56 22.00 19.55 17.08 15.01 13.27 10.22 8.80 7.51 6.63 5.11 4.40 İ1 7.80 6.10 7.80 2.95 6.10 2.55 2.23 1.96 1.73 7.80 1.33 6.10 1.15 2.55 2.23 1.96 1.73 1.33 2.55 2.23 1.96 1.73 1.33 1.15 1.96 1.73 1.33 1.15 fB =1 Z2/Z1 -1 39/1 39/1 33/2 39/1 33/2 39/1 39/1 39/1 39/1 23/3 39/1 23/3 39/1 33/2 33/2 33/2 33/2 33/2 23/3 23/3 23/3 23/3 23/3 23/3 23/6 23/6 23/6 23/6 -1 Mamax P1max ƞ n 2 Type n1= 700 min f B W n1= 465 min -1 Mamax P1max ƞ n 2 1 fB =1 -1 f B W n1= 250 min -1 2 1 fB =1 -1 f B [kW] [%] [min ] [Nm] [kW] [%] [min ] [Nm] [kW] [%] 107 109 107 104 109 103 99 98 96 107 97 109 99 95 92 90 87 88 90 88 86 85 82 80 66 63 58 56 0.05 0.07 0.09 0.13 0.12 0.15 0.16 0.18 0.20 0.17 0.26 0.22 0.30 0.24 0.27 0.29 0.32 0.41 0.43 0.47 0.52 0.59 0.55 0.55 0.55 0.55 0.55 0.55 48 48 66 50 67 50 51 52 52 77 53 78 54 69 69 70 70 71 79 80 80 80 81 81 85 86 86 86 112 113 112 111 113 110 105 104 102 112 105 113 108 101 98 95 93 95 95 94 92 90 88 87 70 67 62 61 0.04 0.05 0.06 0.09 0.08 0.11 0.12 0.13 0.15 0.12 0.19 0.15 0.23 0.17 0.19 0.21 0.23 0.30 0.30 0.34 0.38 0.42 0.36 0.36 0.36 0.36 0.36 0.36 47 47 66 49 66 49 49 50 50 77 51 77 52 68 68 68 69 69 78 79 79 79 80 80 84 85 85 85 0.02 0.03 0.04 0.06 0.05 0.06 0.07 0.08 0.09 0.07 0.12 0.09 0.14 0.10 0.11 0.12 0.14 0.18 0.17 0.20 0.22 0.25 0.20 0.20 0.20 0.20 0.20 0.20 47 47 65 48 66 48 48 48 49 77 49 77 50 66 67 67 67 68 78 78 78 78 78 79 84 84 84 84 1.5 2.0 3.6 4.0 4.6 4.7 5.4 6.1 6.9 7.8 8.9 9.9 10.4 11.1 12.7 14.4 16.3 21.1 23.8 27.2 31.0 35.0 45.5 52.8 61.9 70.1 91.0 105.7 0.82 1.1 1.9 2.2 2.5 2.5 2.9 3.3 3.7 4.2 4.8 5.3 5.6 5.9 6.8 7.7 8.8 11.4 12.8 14.6 16.7 18.8 24.5 28.4 33.3 37.7 48.9 56.8 119 120 119 117 120 116 112 112 110 119 114 120 118 107 104 102 101 103 101 100 99 98 96 94 75 72 68 67 fB 1 [min ] [Nm] 2.3 2.9 5.4 6.1 7.0 7.0 8.1 9.2 10.4 11.7 13.5 15.0 15.6 16.6 19.0 21.7 24.5 31.8 35.8 41.0 46.6 52.8 68.5 79.5 93.2 105.6 137.0 159.1 IEC Mamax P1max ƞ n 63* 63* 63* 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 45 - 59 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80 80 80 80 80 80 80 80 80 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* IEC bağlantısı yoktur - No IEC assembling on empty fields 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr 89 W - IEC Tip Tahvil Helisel Sonsuz Reduction Helical Worm W Mamax P1max n 2 Type PSH 3050 W mm 111...117 + IEC mm 121...127 iges 3016.29 2248.25 1969.48 1746.47 1330.71 991.88 868.89 755.93 663.52 586.50 473.94 412.72 333.50 292.73 209.09 182.08 158.10 138.77 122.67 99.12 86.32 76.58 67.22 59.42 48.01 41.81 İ1 59.14 44.08 38.62 34.24 59.14 44.08 38.62 14.82 13.01 11.50 9.29 8.09 14.82 13.01 9.29 8.09 14.82 13.01 11.50 9.29 8.09 14.82 13.01 11.50 9.29 8.09 f B=1 Z2/Z1 51/1 51/1 51/1 51/1 45/2 45/2 45/2 51/1 51/1 51/1 51/1 51/1 45/2 45/2 45/2 45/2 32/3 32/3 32/3 32/3 32/3 31/6 31/6 31/6 31/6 31/6 n1= 1400 min f B -1 [min ] [Nm] [kW] 0.46 0.62 0.71 0.80 1.1 1.4 1.6 1.9 2.1 2.4 3.0 3.4 4.2 4.8 6.7 7.7 8.9 10.1 11.4 14.1 16.2 18.3 20.8 23.6 29.2 33.5 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 190 180 140 130 130 110 110 0.02 0.03 0.03 0.03 0.03 0.04 0.05 0.08 0.09 0.10 0.13 0.14 0.13 0.15 0.20 0.23 0.23 0.26 0.30 0.36 0.37 0.32 0.34 0.37 0.37 0.37 -1 ƞ W n1= 930 min Mamax P1max n 2 1 f B =1 f B -1 IEC ƞ fB 1 [%] -1 [min ] [Nm] [kW] [%] 47 47 47 47 65 66 66 48 48 48 49 49 67 67 68 68 78 78 78 78 79 83 84 84 84 84 0.31 0.41 0.47 0.53 0.70 0.94 1.1 1.2 1.4 1.6 2.0 2.3 2.8 3.2 4.4 5.1 5.9 6.7 7.6 9.4 10.8 12.1 13.8 15.7 19.4 22.2 199 201 202 203 199 201 202 203 203 203 202 203 203 203 202 203 203 203 203 197 187 141 136 135 114 110 0.01 0.02 0.02 0.02 0.02 0.03 0.04 0.05 0.06 0.07 0.09 0.10 0.09 0.10 0.14 0.16 0.16 0.18 0.21 0.25 0.24 0.22 0.24 0.24 0.24 0.24 46 46 47 47 65 65 65 47 47 48 48 48 66 66 67 67 77 77 77 78 78 83 83 83 83 84 63* 63* 63* 63* 63* 63* 63* 63* 63* 63* 63* 63* 63* 63* 63 63 63 63 63 63 63 63 63 63 63 63 45 - 59 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71 71* 71* 71 71 71 IEC bağlantısı yoktur - No IEC assembling on empty fields 90 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr W - IEC Tahvil Tip W Helisel Sonsuz Reduction Helical Worm PSH 3050 W mm 111...117 + IEC mm 121...127 iges 3016.29 2248.25 1969.48 1746.47 1330.71 991.88 868.89 755.93 663.52 586.50 473.94 412.72 333.50 292.73 209.09 182.08 158.10 138.77 122.67 99.12 86.32 76.58 67.22 59.42 48.01 41.81 İ1 59.14 44.08 38.62 34.24 59.14 44.08 38.62 14.82 13.01 11.50 9.29 8.09 14.82 13.01 9.29 8.09 14.82 13.01 11.50 9.29 8.09 14.82 13.01 11.50 9.29 8.09 fB =1 Z2/Z1 -1 51/1 51/1 51/1 51/1 45/2 45/2 45/2 51/1 51/1 51/1 51/1 51/1 45/2 45/2 45/2 45/2 32/3 32/3 32/3 32/3 32/3 31/6 31/6 31/6 31/6 31/6 -1 Mamax P1max ƞ n 2 Type n1= 700 min f B W n1= 465 min -1 Mamax P1max ƞ n 2 1 fB =1 -1 f B W n1= 250 min -1 2 1 fB =1 -1 f B [kW] [%] [min ] [Nm] [kW] [%] [min ] [Nm] [kW] [%] 202 204 205 207 202 204 205 208 208 208 209 209 208 208 209 209 208 208 208 203 193 141 139 138 118 109 0.01 0.01 0.02 0.02 0.02 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.07 0.08 0.11 0.13 0.12 0.14 0.16 0.20 0.21 0.16 0.18 0.19 0.19 0.19 46 46 46 46 65 65 65 47 47 47 48 48 66 66 66 66 77 77 77 77 78 83 83 83 83 83 0.01 0.01 0.01 0.01 0.01 0.02 0.02 0.03 0.03 0.04 0.05 0.05 0.05 0.06 0.08 0.09 0.09 0.10 0.11 0.13 0.12 0.12 0.12 0.12 0.12 0.12 46 46 46 46 65 65 65 47 47 47 47 47 65 66 66 66 77 77 77 77 77 83 83 83 83 83 232 230 229 227 232 230 229 227 229 229 231 232 227 229 231 232 227 229 229 225 199 139 138 137 120 109 0.01 0.01 0.01 0.01 0.01 0.01 0.02 0.02 0.02 0.03 0.03 0.03 0.03 0.04 0.05 0.05 0.06 0.06 0.08 0.07 0.06 0.07 0.07 0.07 0.07 46 46 46 46 65 65 65 46 46 46 47 47 65 65 65 66 77 77 77 77 77 82 82 82 83 83 0.15 0.21 0.24 0.27 0.35 0.47 0.54 0.62 0.70 0.79 1.0 1.1 1.4 1.6 2.2 2.6 2.9 3.4 3.8 4.7 5.4 6.1 6.9 7.8 9.7 11.1 215 207 209 211 215 207 209 219 219 218 216 217 219 219 216 217 219 219 218 211 199 141 139 138 120 109 0.08 0.11 0.13 0.14 0.19 0.25 0.29 0.33 0.38 0.43 0.53 0.61 0.75 0.85 1.2 1.4 1.6 1.8 2.0 2.5 2.9 3.3 3.7 4.2 5.2 6.0 fB 1 [min ] [Nm] 0.23 0.31 0.36 0.40 0.53 0.71 0.81 0.93 1.1 1.2 1.5 1.7 2.1 2.4 3.3 3.8 4.4 5.0 5.7 7.1 8.1 9.1 10.4 11.8 14.6 16.7 IEC Mamax P1max ƞ n 63* 63* 63* 63* 63* 63* 63* 63* 63* 63* 63* 63 63* 63* 63* 63 63 63 63 63 63 63 63 63 63 63 45 - 59 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* IEC bağlantısı yoktur - No IEC assembling on empty fields 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr 91 W - IEC Tip Tahvil Helisel Sonsuz Reduction Helical Worm W Mamax P1max n 2 Type PSH 2050 W mm 110...116 + IEC mm 120...126 iges 524.57 439.88 385.33 341.70 231.43 194.06 170.00 147.90 129.82 114.75 92.73 80.75 65.25 57.27 50.63 40.91 35.63 30.93 27.15 24.00 19.39 16.89 14.77 13.15 11.63 9.39 8.18 7.15 İ1 10.29 8.62 7.56 6.70 10.29 8.62 7.56 2.90 2.55 2.25 1.82 1.58 2.90 2.55 2.25 1.82 1.58 2.90 2.55 2.25 1.82 1.58 1.38 2.55 2.25 1.82 1.58 1.38 f B=1 Z2/Z1 51/1 51/1 51/1 51/1 45/2 45/2 45/2 51/1 51/1 51/1 51/1 51/1 45/2 45/2 45/2 45/2 45/2 32/3 32/3 32/3 32/3 32/3 32/3 31/6 31/6 31/6 31/6 31/6 n1= 1400 min f B -1 [min ] [Nm] [kW] 2.7 3.2 3.6 4.1 6.0 7.2 8.2 9.5 10.8 12.2 15.1 17.3 21.5 24.4 27.7 34.2 39.3 45.3 51.6 58.3 72.2 82.9 94.8 106.5 120.4 149.1 171.1 195.8 185 185 185 185 185 185 185 175 168 168 168 168 168 168 155 155 155 155 155 155 145 120 113 120 113 110 110 105 0.11 0.13 0.14 0.16 0.17 0.21 0.23 0.32 0.35 0.38 0.47 0.52 0.53 0.60 0.62 0.75 0.85 0.91 1.02 1.15 1.32 1.26 1.34 1.50 1.50 1.50 1.50 1.50 -1 ƞ W n1= 930 min Mamax P1max n 2 1 f B =1 f B -1 IEC ƞ fB 1 [%] -1 [min ] [Nm] [kW] [%] 49 49 50 50 67 68 68 54 55 56 57 58 72 72 73 74 75 81 82 82 83 83 84 87 87 88 88 88 1.8 2.1 2.4 2.7 4.0 4.8 5.5 6.3 7.2 8.1 10.0 11.5 14.3 16.2 18.4 22.7 26.1 30.1 34.3 38.8 48.0 55.1 63.0 70.7 80.0 99.0 113.7 130.1 192 192 193 195 192 192 193 188 181 182 185 187 180 181 168 171 172 166 167 168 160 133 127 129 123 121 122 118 0.08 0.09 0.10 0.11 0.12 0.14 0.17 0.24 0.26 0.29 0.36 0.41 0.39 0.44 0.46 0.56 0.65 0.65 0.75 0.84 0.98 0.94 1.02 0.99 0.99 0.99 0.99 0.99 48 48 48 49 67 67 67 52 52 53 54 55 70 70 71 72 72 80 80 81 82 82 82 86 86 87 87 87 63* 63* 63* 63* 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 71* 71* 71* 71* 71* 71* 71* 71* 71* 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 45 - 59 80* 80* 80* 80* 80* 80* 80* 80* 80* 80 80 80 80 80 80 80 80 80 80 80 80 80 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90 90 90 90 90 IEC bağlantısı yoktur - No IEC assembling on empty fields 92 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr W - IEC Tahvil Tip W Helisel Sonsuz Reduction Helical Worm PSH 2050 W mm 110...116 + IEC mm 120...126 iges 524.57 439.88 385.33 341.70 231.43 194.06 170.00 147.90 129.82 114.75 92.73 80.75 65.25 57.27 50.63 40.91 35.63 30.93 27.15 24.00 19.39 16.89 14.77 13.15 11.63 9.39 8.18 7.15 İ1 10.29 8.62 7.56 6.70 10.29 8.62 7.56 2.90 2.55 2.25 1.82 1.58 2.90 2.55 2.25 1.82 1.58 2.90 2.55 2.25 1.82 1.58 1.38 2.55 2.25 1.82 1.58 1.38 fB =1 Z2/Z1 -1 51/1 51/1 51/1 51/1 45/2 45/2 45/2 51/1 51/1 51/1 51/1 51/1 45/2 45/2 45/2 45/2 45/2 32/3 32/3 32/3 32/3 32/3 32/3 31/6 31/6 31/6 31/6 31/6 -1 Mamax P1max ƞ n 2 Type n1= 700 min f B W n1= 465 min -1 Mamax P1max ƞ n 2 1 fB =1 -1 f B W n1= 250 min -1 2 1 fB =1 -1 f B [kW] [%] [min ] [Nm] [kW] [%] [min ] [Nm] [kW] [%] 198 198 198 199 198 198 198 194 188 190 195 198 186 188 176 180 183 172 174 176 168 141 135 134 128 128 130 126 0.06 0.07 0.08 0.09 0.09 0.11 0.13 0.19 0.21 0.23 0.29 0.34 0.30 0.35 0.36 0.45 0.53 0.52 0.59 0.67 0.78 0.75 0.83 0.75 0.75 0.75 0.75 0.75 47 48 48 48 66 66 67 51 51 52 53 53 69 69 70 71 71 79 80 80 81 81 81 85 85 86 86 87 0.04 0.05 0.06 0.06 0.07 0.08 0.09 0.14 0.15 0.17 0.21 0.25 0.22 0.25 0.26 0.33 0.39 0.37 0.42 0.48 0.57 0.54 0.60 0.50 0.50 0.50 0.50 0.50 47 47 47 47 66 66 66 49 49 50 51 51 68 68 68 69 69 78 79 79 79 80 80 84 85 85 85 86 0.02 0.03 0.03 0.04 0.04 0.05 0.05 0.08 0.09 0.10 0.13 0.15 0.13 0.15 0.15 0.20 0.23 0.21 0.24 0.28 0.33 0.33 0.35 0.27 0.27 0.27 0.27 0.27 47 47 47 47 65 65 66 48 48 48 49 49 66 67 67 67 68 78 78 78 78 78 79 83 84 84 84 84 0.89 1.1 1.2 1.4 2.0 2.4 2.7 3.1 3.6 4.1 5.0 5.8 7.1 8.1 9.2 11.4 13.1 15.0 17.1 19.4 24.0 27.5 31.5 35.4 40.0 49.5 56.8 65.0 206 205 207 208 206 205 207 207 201 203 207 211 199 201 187 191 195 183 185 187 178 151 146 141 136 135 137 136 0.48 0.57 0.65 0.73 1.1 1.3 1.5 1.7 1.9 2.2 2.7 3.1 3.8 4.4 4.9 6.1 7.0 8.1 9.2 10.4 12.9 14.8 16.9 19.0 21.5 26.6 30.6 35.0 218 219 220 221 211 219 220 219 212 216 224 229 210 212 199 206 211 194 196 199 193 164 158 139 140 137 135 133 fB 1 [min ] [Nm] 1.3 1.6 1.8 2.0 3.0 3.6 4.1 4.7 5.4 6.1 7.5 8.7 10.7 12.2 13.8 17.1 19.6 22.6 25.8 29.2 36.1 41.4 47.4 53.2 60.2 74.5 85.6 97.9 IEC Mamax P1max ƞ n 63* 63* 63* 63* 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 45 - 59 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80* 80 80 80 80 80 80 80 80 80 80 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90 90 IEC bağlantısı yoktur - No IEC assembling on empty fields 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr 93 W - IEC Tip Tahvil Helisel Sonsuz Reduction Helical Worm W Mamax P1max n 2 Type PSH 3063 W mm 111...117 + IEC mm 121...127 iges 3628.29 2704.42 2374.96 2111.40 1343.24 1140.10 938.40 738.56 604.27 532.19 471.21 395.60 349.65 311.35 254.74 224.36 198.65 178.60 146.13 128.70 113.95 97.18 79.65 65.17 İ1 71.14 53.03 46.57 41.40 62.48 53.03 18.40 14.48 11.85 10.44 9.24 18.40 16.26 14.48 11.85 10.44 9.24 14.48 11.85 10.44 9.24 7.88 14.48 11.85 f B=1 Z2/Z1 51/1 51/1 51/1 51/1 43/2 43/2 51/1 51/1 51/1 51/1 51/1 43/2 43/2 43/2 43/2 43/2 43/2 37/3 37/3 37/3 37/3 37/3 33/6 33/6 n1= 1400 min f B -1 [min ] [Nm] [kW] 0.39 0.52 0.59 0.66 1.0 1.2 1.5 1.9 2.3 2.6 3.0 3.5 4.0 4.5 5.5 6.2 7.0 7.8 9.6 10.9 12.3 14.4 17.6 21.5 380 380 380 380 380 380 380 380 380 380 380 380 380 380 370 370 360 340 330 300 260 230 200 170 0.03 0.04 0.05 0.06 0.06 0.07 0.13 0.16 0.19 0.21 0.24 0.21 0.24 0.27 0.32 0.36 0.37 0.37 0.37 0.37 0.37 0.37 0.37 0.37 -1 ƞ W n1= 930 min Mamax P1max n 2 1 f B =1 f B -1 IEC ƞ fB 1 [%] -1 [min ] [Nm] [kW] [%] 45 46 46 46 64 64 47 48 48 49 49 66 66 66 67 67 68 76 77 77 77 78 84 84 0.26 0.34 0.39 0.44 0.69 0.82 1.0 1.3 1.5 1.7 2.0 2.4 2.7 3.0 3.7 4.1 4.7 5.2 6.4 7.2 8.2 9.6 11.7 14.3 387 390 391 393 388 390 392 396 396 395 394 392 394 396 385 384 373 354 333 296 260 227 198 168 0.02 0.03 0.04 0.04 0.04 0.05 0.09 0.11 0.13 0.15 0.17 0.15 0.17 0.19 0.23 0.25 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 45 45 45 45 64 64 46 47 47 47 48 65 65 66 66 66 66 75 76 76 76 77 83 83 63* 63* 63* 63* 63* 63* 63* 63* 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 45 - 59 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71 71 71 71 71 71 71 71 İşareti belirtilen tahvil oranlarının B14 veya B5 flanşlı gövde bağlantılılar için geçerli olduğunu gösterir. Sign shows that this reduction ratio is valid for geared motor with B14 and B5 flange IEC bağlantısı yoktur - No IEC assembling on empty fields 94 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr W - IEC Tahvil Tip W Helisel Sonsuz Reduction Helical Worm iges İ1 fB =1 Z2/Z1 -1 [min ] [Nm] PSH 3063 W mm 111...117 + IEC mm 121...127 3628.29 2704.42 2374.96 2111.40 1343.24 1140.10 938.40 738.56 604.27 532.19 471.21 395.60 349.65 311.35 254.74 224.36 198.65 178.60 146.13 128.70 113.95 97.18 79.65 65.17 71.14 53.03 46.57 41.40 62.48 53.03 18.40 14.48 11.85 10.44 9.24 18.40 16.26 14.48 11.85 10.44 9.24 14.48 11.85 10.44 9.24 7.88 14.48 11.85 51/1 51/1 51/1 51/1 43/2 43/2 51/1 51/1 51/1 51/1 51/1 43/2 43/2 43/2 43/2 43/2 43/2 37/3 37/3 37/3 37/3 37/3 33/6 33/6 -1 Mamax P1max ƞ n 2 Type n1= 700 min 0.19 0.26 0.29 0.33 0.52 0.61 0.75 0.95 1.2 1.3 1.5 1.8 2.0 2.2 2.7 3.1 3.5 3.9 4.8 5.4 6.1 7.2 8.8 10.7 392 394 397 399 392 394 407 405 405 406 406 407 406 405 395 395 385 363 329 292 260 224 198 168 f B W n1= 465 min -1 Mamax P1max ƞ n 2 1 fB =1 -1 f B W n1= 250 min -1 2 1 fB =1 -1 f B [%] [min ] [Nm] [kW] [%] [min ] [Nm] [kW] [%] 0.02 0.02 0.03 0.03 0.03 0.04 0.07 0.09 0.11 0.12 0.14 0.12 0.13 0.14 0.17 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 45 45 45 45 64 64 46 46 47 47 47 65 65 65 65 66 66 75 75 75 76 76 83 83 0.01 0.02 0.02 0.02 0.02 0.03 0.05 0.06 0.07 0.08 0.10 0.08 0.09 0.10 0.12 0.14 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 45 45 45 45 64 64 45 46 46 46 46 64 65 65 65 65 65 75 75 75 75 75 82 83 0.01 0.01 0.01 0.01 0.01 0.02 0.03 0.04 0.04 0.05 0.05 0.05 0.05 0.06 0.07 0.08 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 45 45 45 45 64 64 45 45 45 45 46 64 64 64 64 64 64 74 74 74 75 75 82 82 426 413 406 406 421 413 424 427 425 423 421 424 425 427 414 412 388 382 329 292 257 221 196 168 0.07 0.09 0.11 0.12 0.19 0.22 0.27 0.34 0.41 0.47 0.53 0.63 0.72 0.80 1.0 1.1 1.3 1.4 1.7 1.9 2.2 2.6 3.1 3.8 454 451 449 447 452 428 437 444 447 448 449 437 440 444 435 430 382 396 325 288 257 221 196 166 fB 1 [kW] 0.13 0.17 0.20 0.22 0.35 0.41 0.50 0.63 0.77 0.87 1.0 1.2 1.3 1.5 1.8 2.1 2.3 2.6 3.2 3.6 4.1 4.8 5.8 7.1 IEC Mamax P1max ƞ n 63* 63* 63* 63* 63* 63* 63* 63* 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 45 - 59 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71* 71 71 71 71 71 İşareti belirtilen tahvil oranlarının B14 veya B5 flanşlı gövde bağlantılılar için geçerli olduğunu gösterir. Sign shows that this reduction ratio is valid for geared motor with B14 and B5 flange IEC bağlantısı yoktur - No IEC assembling on empty fields 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr 95 W - IEC Tip Tahvil Helisel Sonsuz Reduction Helical Worm W Mamax P1max n 2 Type PSH 2063 W mm 110...116 + IEC mm 120...126 iges 626.57 529.13 464.67 413.10 264.14 223.06 195.89 183.60 162.27 144.50 118.23 104.13 92.19 77.40 68.41 60.92 49.84 43.90 38.87 34.94 28.59 25.18 22.29 19.01 15.58 12.75 11.23 9.94 8.48 7.40 İ1 12.29 10.38 9.11 8.10 12.29 10.38 9.11 3.60 3.18 2.83 2.32 2.04 1.81 3.60 3.18 2.83 2.32 2.04 1.81 2.83 2.32 2.04 1.81 1.54 2.83 2.32 2.04 1.81 1.54 1.35 f B=1 Z2/Z1 51/1 51/1 51/1 51/1 43/2 43/2 43/2 51/1 51/1 51/1 51/1 51/1 51/1 43/2 43/2 43/2 43/2 43/2 43/2 37/3 37/3 37/3 37/3 37/3 33/6 33/6 33/6 33/6 33/6 33/6 n1= 1400 min f B -1 [min ] [Nm] [kW] 2.2 2.6 3.0 3.4 5.3 6.3 7.1 7.6 8.6 9.7 11.8 13.4 15.2 18.1 20.5 23.0 28.1 31.9 36.0 40.1 49.0 55.6 62.8 73.6 89.9 109.8 124.7 140.8 165.1 189.2 360 360 360 360 350 360 360 325 310 300 295 295 295 305 295 280 262 250 245 262 245 245 245 215 190 180 175 170 166 156 0.17 0.20 0.23 0.26 0.29 0.35 0.39 0.48 0.51 0.54 0.63 0.70 0.78 0.80 0.87 0.92 1.03 1.11 1.22 1.36 1.53 1.72 1.94 1.97 2.06 2.20 2.20 2.20 2.20 2.20 -1 ƞ W n1= 930 min Mamax P1max n 2 1 f B =1 f B -1 IEC ƞ fB 1 [%] -1 [min ] [Nm] [kW] [%] 48 49 49 50 67 67 68 54 55 56 58 59 60 72 73 73 75 75 76 81 82 83 83 84 87 88 88 89 89 90 1.5 1.8 2.0 2.3 3.5 4.2 4.7 5.1 5.7 6.4 7.9 8.9 10.1 12.0 13.6 15.3 18.7 21.2 23.9 26.6 32.5 36.9 41.7 48.9 59.7 72.9 82.8 93.6 109.7 125.7 375 374 373 375 349 374 373 343 330 322 320 322 325 322 314 301 284 273 270 281 266 268 270 240 204 195 191 187 185 176 0.13 0.15 0.16 0.19 0.19 0.25 0.27 0.35 0.38 0.41 0.49 0.55 0.61 0.58 0.64 0.68 0.77 0.83 0.91 0.98 1.12 1.28 1.44 1.50 1.48 1.45 1.45 1.45 1.45 1.45 47 47 48 48 66 66 67 52 52 53 54 55 56 70 70 71 72 73 74 80 81 81 82 82 86 87 87 88 88 88 63* 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 71* 71* 71* 71* 71* 71* 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 45 - 59 80* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90 90 90 90 90 90 90 90 90 90 80* 80* 80* 80* 80* 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* İşareti belirtilen tahvil oranlarının B14 veya B5 flanşlı gövde bağlantılılar için geçerli olduğunu gösterir. Sign shows that this reduction ratio is valid for geared motor with B14 and B5 flange IEC bağlantısı yoktur - No IEC assembling on empty fields 96 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr W - IEC Tahvil Tip W Helisel Sonsuz Reduction Helical Worm iges İ1 fB =1 Z2/Z1 -1 [min ] [Nm] PSH 2063 W mm 110...116 + IEC mm 120...126 626.57 529.13 464.67 413.10 264.14 223.06 195.89 183.60 162.27 144.50 118.23 104.13 92.19 77.40 68.41 60.92 49.84 43.90 38.87 34.94 28.59 25.18 22.29 19.01 15.58 12.75 11.23 9.94 8.48 7.40 12.29 10.38 9.11 8.10 12.29 10.38 9.11 3.60 3.18 2.83 2.32 2.04 1.81 3.60 3.18 2.83 2.32 2.04 1.81 2.83 2.32 2.04 1.81 1.54 2.83 2.32 2.04 1.81 1.54 1.35 51/1 51/1 51/1 51/1 43/2 43/2 43/2 51/1 51/1 51/1 51/1 51/1 51/1 43/2 43/2 43/2 43/2 43/2 43/2 37/3 37/3 37/3 37/3 37/3 33/6 33/6 33/6 33/6 33/6 33/6 -1 Mamax P1max ƞ n 2 Type n1= 700 min 1.1 1.3 1.5 1.7 2.7 3.1 3.6 3.8 4.3 4.8 5.9 6.7 7.6 9.0 10.2 11.5 14.0 15.9 18.0 20.0 24.5 27.8 31.4 36.8 44.9 54.9 62.3 70.4 82.5 94.6 384 385 385 385 344 385 385 359 343 333 333 338 343 336 327 311 296 286 285 291 277 281 285 254 211 203 200 197 196 187 f B W n1= 465 min -1 Mamax P1max ƞ n 2 1 fB =1 -1 f B W n1= 250 min -1 Mamax P1max ƞ n 2 1 fB =1 -1 f B 1 [kW] [%] [min ] [Nm] [kW] [%] [min ] [Nm] [kW] [%] 0.10 0.11 0.13 0.15 0.15 0.19 0.22 0.29 0.30 0.33 0.39 0.45 0.51 0.46 0.51 0.54 0.61 0.67 0.75 0.77 0.90 1.02 1.17 1.21 1.15 1.10 1.10 1.10 1.10 1.10 46 47 47 47 65 66 66 50 51 51 53 53 54 69 69 70 71 71 72 79 79 80 80 81 86 86 86 87 87 88 0.07 0.08 0.09 0.10 0.10 0.14 0.15 0.21 0.22 0.24 0.29 0.33 0.37 0.33 0.37 0.39 0.44 0.49 0.54 0.56 0.65 0.74 0.83 0.88 0.84 0.73 0.73 0.73 0.73 0.73 46 46 46 46 65 65 65 48 49 49 50 51 51 67 67 68 69 69 70 77 78 78 79 79 84 85 85 86 86 86 423 424 426 428 338 424 426 399 384 376 377 385 393 374 366 351 335 326 327 328 313 320 327 295 238 230 228 227 228 220 0.04 0.05 0.05 0.06 0.05 0.08 0.09 0.12 0.13 0.14 0.17 0.20 0.23 0.19 0.21 0.23 0.26 0.29 0.33 0.33 0.38 0.43 0.50 0.53 0.48 0.40 0.40 0.40 0.40 0.40 45 45 46 46 64 64 64 47 47 47 48 48 49 66 66 66 67 67 67 76 76 77 77 77 83 84 84 84 85 85 0.74 0.88 1.0 1.1 1.8 2.1 2.4 2.5 2.9 3.2 3.9 4.5 5.0 6.0 6.8 7.6 9.3 10.6 12.0 13.3 16.3 18.5 20.9 24.5 29.8 36.5 41.4 46.8 54.8 62.8 403 401 399 401 344 401 399 377 363 355 355 359 363 353 345 332 315 304 301 310 295 298 301 272 225 216 213 209 210 202 0.40 0.47 0.54 0.61 0.95 1.1 1.3 1.4 1.5 1.7 2.1 2.4 2.7 3.2 3.7 4.1 5.0 5.7 6.4 7.2 8.7 9.9 11.2 13.2 16.0 19.6 22.3 25.2 29.5 33.8 IEC fB 63* 71* 63 71* 63 71* 71* 63 71* 63 71* 63 71* 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 45 - 59 80* 80* 80* 80* 80* 80* 80* 80* 80* 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90 90 90 90 90 90 90 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* İşareti belirtilen tahvil oranlarının B14 veya B5 flanşlı gövde bağlantılılar için geçerli olduğunu gösterir. Sign shows that this reduction ratio is valid for geared motor with B14 and B5 flange IEC bağlantısı yoktur - No IEC assembling on empty fields 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr 97 W - IEC Tip Tahvil Helisel Sonsuz Reduction Helical Worm W Mamax P1max n 2 Type PSH 3080 W mm 111...117 + IEC mm 121...127 PSH 2080 W mm 110...116 + IEC mm 120...126 iges İ1 n1= 1400 min f B=1 Z2/Z1 f B -1 [min ] [Nm] [kW] -1 ƞ W n1= 930 min Mamax P1max n 2 1 f B =1 f B -1 IEC ƞ fB 1 [%] -1 [min ] [Nm] [kW] [%] 3356.08 2658.80 2059.27 1199.07 955.78 805.70 705.97 631.62 543.06 481.23 402.93 339.66 297.62 266.27 228.94 193.65 163.25 143.04 127.97 110.03 97.50 65.81 52.13 40.38 23.51 18.74 15.80 13.84 12.38 10.65 9.44 18.74 15.80 13.84 12.38 10.65 18.74 15.80 13.84 12.38 10.65 9.44 51/1 51/1 51/1 51/1 51/1 51/1 51/1 51/1 51/1 51/1 43/2 43/2 43/2 43/2 43/2 31/3 31/3 31/3 31/3 31/3 31/3 0.42 0.53 0.68 1.2 1.5 1.7 2.0 2.2 2.6 2.9 3.5 4.1 4.7 5.3 6.1 7.2 8.6 9.8 10.9 12.7 14.4 770 770 770 770 770 770 770 770 770 770 770 700 610 570 570 450 380 340 300 260 230 0.08 0.09 0.12 0.21 0.26 0.29 0.33 0.36 0.37 0.37 0.37 0.37 0.37 0.37 0.37 0.37 0.37 0.37 0.37 0.37 0.37 45 45 46 47 47 48 49 49 50 50 67 68 68 68 69 78 78 78 79 79 79 0.28 0.35 0.45 0.78 1.0 1.2 1.3 1.5 1.7 1.9 2.3 2.7 3.1 3.5 4.1 4.8 5.7 6.5 7.3 8.5 9.5 786 790 796 804 795 800 804 802 781 739 795 679 601 562 554 448 377 335 299 257 229 0.05 0.06 0.08 0.14 0.18 0.21 0.23 0.27 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 45 45 45 46 46 47 47 47 48 48 66 66 67 67 67 77 77 77 78 78 78 63* 63* 63* 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 71* 71* 71* 71* 71* 71* 71* 71* 71 71 71 71 71 71 71 71 71 71 71 71 71 656.63 520.20 402.90 276.81 234.60 187.00 157.64 138.13 123.58 106.25 94.15 78.83 66.45 58.23 52.10 44.79 37.89 31.94 27.99 25.04 21.53 19.08 15.97 13.99 12.52 10.76 9.54 7.55 12.88 10.20 7.90 12.88 4.60 3.67 3.09 2.71 2.42 2.08 1.85 3.67 3.09 2.71 2.42 2.08 3.67 3.09 2.71 2.42 2.08 1.85 3.09 2.71 2.42 2.08 1.85 1.46 51/1 51/1 51/1 43/2 51/1 51/1 51/1 51/1 51/1 51/1 51/1 43/2 43/2 43/2 43/2 43/2 31/3 31/3 31/3 31/3 31/3 31/3 31/6 31/6 31/6 31/6 31/6 31/6 2.1 2.7 3.5 5.1 6.0 7.5 8.9 10.1 11.3 13.2 14.9 17.8 21.1 24.0 26.9 31.3 36.9 43.8 50.0 55.9 65.0 73.4 87.7 100.1 111.8 130.1 146.8 185.4 710 710 710 710 710 670 670 645 620 590 560 655 630 600 575 550 550 525 510 490 470 455 395 365 345 340 340 295 0.32 0.40 0.51 0.56 0.81 0.92 1.08 1.14 1.20 1.32 1.39 1.63 1.83 1.96 2.10 2.31 2.56 2.87 3.14 3.37 3.72 4.00 4.00 4.00 4.00 4.00 4.00 4.00 49 50 51 68 55 57 58 60 61 62 63 75 76 77 77 78 83 84 85 85 86 86 89 89 90 90 90 91 1.4 1.8 2.3 3.4 4.0 5.0 5.9 6.7 7.5 8.8 9.9 11.8 14.0 16.0 17.9 20.8 24.5 29.1 33.2 37.1 43.2 48.7 58.2 66.5 74.3 86.4 97.5 123.2 740 737 740 740 752 706 714 694 671 643 615 690 672 646 622 600 580 560 549 530 513 500 421 393 373 371 374 330 0.23 0.29 0.36 0.39 0.61 0.68 0.80 0.87 0.92 1.02 1.08 1.18 1.35 1.46 1.55 1.72 1.81 2.08 2.30 2.48 2.76 2.64 2.64 2.64 2.64 2.64 2.64 2.64 47 48 49 67 52 54 55 56 57 58 59 72 73 74 75 76 82 82 83 83 84 85 88 88 88 89 89 90 63 71* 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 45 - 59 80* 80* 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 90* 90* 90* 90* 90* 90* 90* 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100* 100 100 100 100 100 100 100 100 100 100 112* 112* 112* 112* 112* 112* 112* 112* 112* 112* 112* 112* 112* 112* 112* 112* 112 112 112 112 112 112 112 İşareti belirtilen tahvil oranlarının B14 veya B5 flanşlı gövde bağlantılılar için geçerli olduğunu gösterir. Sign shows that this reduction ratio is valid for geared motor with B14 and B5 flange IEC bağlantısı yoktur - No IEC assembling on empty fields 98 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr W - IEC Tahvil Tip W Helisel Sonsuz Reduction Helical Worm PSH 3080 W mm 111...117 + IEC mm 121...127 PSH 2080 W mm 110...116 + IEC mm 120...126 iges İ1 -1 Mamax P1max ƞ n 2 Type n1= 700 min fB =1 Z2/Z1 -1 f B W n1= 465 min -1 Mamax P1max ƞ n 2 1 fB =1 -1 f B W n1= 250 min -1 IEC Mamax P1max ƞ n 2 1 fB =1 -1 f B fB 1 [min ] [Nm] [kW] [%] [min ] [Nm] [kW] [%] [min ] [Nm] [kW] [%] 3356.08 2658.80 2059.27 1199.07 955.78 805.70 705.97 631.62 543.06 481.23 402.93 339.66 297.62 266.27 228.94 193.65 163.25 143.04 127.97 110.03 97.50 65.81 52.13 40.38 23.51 18.74 15.80 13.84 12.38 10.65 9.44 18.74 15.80 13.84 12.38 10.65 18.74 15.80 13.84 12.38 10.65 9.44 51/1 51/1 51/1 51/1 51/1 51/1 51/1 51/1 51/1 51/1 43/2 43/2 43/2 43/2 43/2 31/3 31/3 31/3 31/3 31/3 31/3 0.21 0.26 0.34 0.58 0.73 0.87 1.0 1.1 1.3 1.5 1.7 2.1 2.4 2.6 3.1 3.6 4.3 4.9 5.5 6.4 7.2 793 800 809 828 825 823 821 821 764 724 798 679 592 554 554 442 377 335 295 254 229 0.04 0.05 0.06 0.11 0.14 0.16 0.19 0.20 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 45 45 45 46 46 46 46 47 47 47 66 66 66 66 67 76 77 77 77 77 78 0.14 0.17 0.23 0.39 0.49 0.58 0.66 0.74 0.86 1.0 1.2 1.4 1.6 1.7 2.0 2.4 2.8 3.3 3.6 4.2 4.8 857 835 823 853 858 862 866 863 748 709 786 669 583 554 545 442 372 331 291 254 226 0.03 0.03 0.04 0.08 0.10 0.11 0.13 0.15 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 45 45 45 45 45 46 46 46 46 46 65 65 65 66 66 76 76 76 76 77 77 0.07 0.09 0.12 0.21 0.26 0.31 0.35 0.40 0.46 0.52 0.62 0.74 0.84 0.94 1.1 1.3 1.5 1.7 2.0 2.3 2.6 918 912 905 874 884 894 902 851 732 693 786 669 583 545 537 442 372 331 291 250 223 0.02 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 44 44 44 45 45 45 45 45 45 45 65 65 65 65 65 76 76 76 76 76 76 63* 63* 63* 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 656.63 520.20 402.90 276.81 234.60 187.00 157.64 138.13 123.58 106.25 94.15 78.83 66.45 58.23 52.10 44.79 37.89 31.94 27.99 25.04 21.53 19.08 15.97 13.99 12.52 10.76 9.54 7.55 12.88 10.20 7.90 12.88 4.60 3.67 3.09 2.71 2.42 2.08 1.85 3.67 3.09 2.71 2.42 2.08 3.67 3.09 2.71 2.42 2.08 1.85 3.09 2.71 2.42 2.08 1.85 1.46 51/1 51/1 51/1 43/2 51/1 51/1 51/1 51/1 51/1 51/1 51/1 43/2 43/2 43/2 43/2 43/2 31/3 31/3 31/3 31/3 31/3 31/3 31/6 31/6 31/6 31/6 31/6 31/6 1.1 1.3 1.7 2.5 3.0 3.7 4.4 5.1 5.7 6.6 7.4 8.9 10.5 12.0 13.4 15.6 18.5 21.9 25.0 28.0 32.5 36.7 43.8 50.0 55.9 65.1 73.4 92.7 757 759 761 731 779 739 742 719 698 674 649 722 698 668 647 629 607 582 568 551 537 528 417 407 388 389 394 351 0.19 0.22 0.28 0.29 0.49 0.55 0.65 0.71 0.76 0.83 0.88 0.95 1.07 1.17 1.24 1.39 1.47 1.65 1.81 1.97 2.20 2.00 2.00 2.00 2.00 2.00 2.00 2.00 47 47 48 66 50 52 53 54 55 56 57 71 72 72 73 74 80 81 82 82 83 83 87 87 87 88 88 89 0.71 0.89 1.2 1.7 2.0 2.5 2.9 3.4 3.8 4.4 4.9 5.9 7.0 8.0 8.9 10.4 12.3 14.6 16.6 18.6 21.6 24.4 29.1 33.2 37.1 43.2 48.7 61.6 797 791 792 731 810 775 787 767 743 716 688 758 740 713 689 668 636 616 606 587 571 559 408 409 406 406 402 377 0.13 0.16 0.21 0.20 0.35 0.41 0.48 0.54 0.57 0.62 0.67 0.68 0.79 0.85 0.92 1.02 1.04 1.19 1.32 1.43 1.59 1.32 1.32 1.32 1.32 1.32 1.32 1.32 46 46 47 66 48 49 50 51 52 53 53 69 69 70 70 71 79 79 80 80 81 81 85 86 86 87 87 88 0.38 0.48 0.62 0.90 1.1 1.3 1.6 1.8 2.0 2.4 2.7 3.2 3.8 4.3 4.8 5.6 6.6 7.8 8.9 10.0 11.6 13.1 15.7 17.9 20.0 23.2 26.2 33.1 833 838 844 720 857 820 832 811 787 767 744 802 783 754 730 715 673 652 641 622 611 604 403 399 401 397 393 390 0.07 0.09 0.12 0.10 0.21 0.24 0.29 0.32 0.34 0.39 0.42 0.40 0.47 0.50 0.54 0.61 0.60 0.68 0.77 0.84 0.94 0.72 0.72 0.72 0.72 0.72 0.72 0.72 45 45 46 65 47 47 48 48 49 49 50 67 67 68 68 69 77 78 78 78 79 79 84 84 85 85 85 86 63 71* 71 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 45 - 59 71* 71* 71* 71* 71* 71* 71* 71* 71 71 71* 71 71 71 71 71 71 71 71 71 71 80* 80* 80* 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 90* 90* 90* 90* 90* 90* 90* 90* 90* 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 100* 112* 100* 112* 100* 112* 100* 112* 100* 112* 100* 112* 100* 112* 100* 112* 100* 112* 100* 112* 100* 112* 100* 112* 100* 112* 100* 112* 100* 112* 100* 112* 100 112* 100 112* 100 112* 100 112* 100 112* 100 112* 100 112* İşareti belirtilen tahvil oranlarının B14 veya B5 flanşlı gövde bağlantılılar için geçerli olduğunu gösterir. Sign shows that this reduction ratio is valid for geared motor with B14 and B5 flange IEC bağlantısı yoktur - No IEC assembling on empty fields 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr 99 W - IEC Tip Tahvil Helisel Sonsuz Reduction Helical Worm W Mamax P1max n 2 Type PSH 3100 W mm 111...117 + IEC mm 121...127 PSH 2100 W mm 110...116 + IEC mm 120...126 iges İ1 n1= 1400 min f B=1 Z2/Z1 f B -1 [min ] [Nm] [kW] -1 ƞ W n1= 930 min Mamax P1max n 2 1 f B =1 f B -1 IEC ƞ fB 1 [%] -1 [min ] [Nm] [kW] [%] 5876.67 4646.67 3735.56 2201.85 1670.37 1506.84 1173.93 660.00 519.44 468.59 365.06 298.69 257.40 182.75 142.38 121.20 109.34 85.18 69.69 53.68 117.53 92.93 74.71 44.04 33.41 30.14 23.48 13.20 10.39 9.37 7.30 5.97 13.20 9.37 7.30 10.39 9.37 7.30 5.97 10.39 50/1 50/1 50/1 50/1 50/1 50/1 50/1 50/1 50/1 50/1 50/1 50/1 39/2 39/2 39/2 35/3 35/3 35/3 35/3 31/6 0.24 0.30 0.37 0.64 0.84 0.93 1.2 2.1 2.7 3.0 3.8 4.7 5.4 7.7 9.8 11.6 12.8 16.4 20.1 26.1 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1510 1510 1510 1420 1310 1190 1190 1080 1080 690 0.09 0.11 0.13 0.23 0.30 0.32 0.42 0.69 0.86 0.94 1.09 1.33 1.22 1.50 1.50 1.50 1.50 1.50 1.50 1.50 45 46 46 47 47 48 48 51 52 53 55 56 70 72 74 80 80 81 82 86 0.16 0.20 0.25 0.42 0.56 0.62 0.79 1.4 1.8 2.0 2.5 3.1 3.6 5.1 6.5 7.7 8.5 10.9 13.3 17.3 1682 1612 1618 1640 1657 1666 1661 1659 1651 1647 1580 1599 1575 1471 1371 1236 1232 1130 1143 696 0.06 0.08 0.09 0.16 0.21 0.23 0.29 0.50 0.62 0.69 0.80 0.98 0.86 0.99 0.99 0.99 0.99 0.99 0.99 0.99 45 45 45 46 46 47 47 49 50 50 52 53 69 70 71 78 79 80 80 85 63* 63* 63* 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 71* 71* 71* 71* 71* 71* 71 71 71 71 71 71 71 71 71 71 71 71 71 71 645.00 510.00 410.00 303.85 241.67 183.33 165.38 128.85 103.85 94.25 71.50 64.50 50.25 42.78 38.59 34.29 30.06 24.23 20.52 18.94 17.09 16.25 13.31 10.73 9.09 7.20 12.90 10.20 8.20 6.08 4.83 3.67 3.31 2.58 2.08 4.83 3.67 3.31 2.58 3.67 3.31 1.76 2.58 2.08 1.76 3.67 3.31 1.39 2.58 2.08 1.76 1.39 50/1 50/1 50/1 50/1 50/1 50/1 50/1 50/1 50/1 39/2 39/2 39/2 39/2 35/3 35/3 39/2 35/3 35/3 35/3 31/6 31/6 35/3 31/6 31/6 31/6 31/6 2.2 2.7 3.4 4.6 5.8 7.6 8.5 10.9 13.5 14.9 19.6 21.7 27.9 32.7 36.3 40.8 46.6 57.8 68.2 73.9 81.9 86.2 105.2 130.5 154.0 194.4 1420 1420 1355 1420 1420 1365 1330 1240 1170 1310 1220 1190 1110 1100 1100 1090 1050 1020 840 720 710 750 710 725 725 680 0.64 0.77 0.89 1.22 1.49 1.78 1.91 2.18 2.47 2.69 3.21 3.42 4.05 4.43 4.92 5.61 5.96 7.10 6.82 6.19 6.77 7.50 7.50 7.50 7.50 7.50 51 52 54 56 58 61 62 65 67 76 78 79 80 85 85 83 86 87 88 90 90 89 91 91 92 92 1.4 1.8 2.3 3.1 3.8 5.1 5.6 7.2 9.0 9.9 13.0 14.4 18.5 21.7 24.1 27.1 30.9 38.4 45.3 49.1 54.4 57.2 69.9 86.7 102.3 129.2 1481 1474 1410 1502 1506 1439 1411 1337 1276 1389 1286 1263 1197 1159 1167 1202 1132 1112 926 721 725 844 712 717 717 680 0.44 0.56 0.67 0.92 1.09 1.35 1.43 1.68 1.91 1.95 2.33 2.51 2.97 3.17 3.55 4.26 4.36 5.26 5.11 4.21 4.64 4.95 4.95 4.95 4.95 4.95 49 50 51 53 55 57 58 60 63 74 75 76 78 83 83 80 84 85 86 88 89 87 89 90 91 91 71 80* 80 71 71 71 71 80 80 80 80 71 71 71 71 71 71 80 80 80 80 80 80 71 80 71 71 80 80 71 80 45 - 59 80* 80 80 80 80 80 80 80 80 80 80 80 80 90* 90* 90* 90* 90* 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90* 90* 90* 90* 90* 90* 90 90 90 90 90 90 100* 112* 100* 100* 100* 100* 100* 100* 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 112* 112* 112* 112* 112* 112* 112* 112* 112 112 112 112 112 112 112 112 112 112 112 112 112 112 132* 132* 132* 132* 132* 132* 132* 132* 132* 132* 132* 132* 132* 132* IEC bağlantısı yoktur - No IEC assembling on empty fields 100 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr W - IEC Tahvil Tip W Helisel Sonsuz Reduction Helical Worm iges İ1 fB =1 Z2/Z1 -1 [min ] [Nm] PSH 3100 W mm 111...117 + IEC mm 121...127 PSH 2100 W mm 110...116 + IEC mm 120...126 -1 Mamax P1max ƞ n 2 Type n1= 700 min f B W n1= 465 min -1 Mamax P1max ƞ n 2 1 fB =1 -1 f B W n1= 250 min -1 2 1 fB =1 -1 f B fB 1 [kW] [%] [min ] [Nm] [kW] [%] [min ] [Nm] [kW] [%] 5876.67 117.53 4646.67 92.93 3735.56 74.71 2201.85 44.04 1670.37 33.41 1506.84 30.14 1173.93 23.48 660.00 13.20 519.44 10.39 9.37 468.59 7.30 365.06 5.97 298.69 257.40 13.20 9.37 182.75 7.30 142.38 121.20 10.39 9.37 109.34 7.30 85.18 5.97 69.69 53.68 10.39 50/1 50/1 50/1 50/1 50/1 50/1 50/1 50/1 50/1 50/1 50/1 50/1 39/2 39/2 39/2 35/3 35/3 35/3 35/3 31/6 0.12 0.15 0.19 0.32 0.42 0.46 0.60 1.1 1.3 1.5 1.9 2.3 2.7 3.8 4.9 5.8 6.4 8.2 10.0 13.0 1760 1712 1655 1664 1690 1703 1710 1695 1698 1700 1619 1642 1610 1518 1405 1271 1272 1158 1174 688 0.05 0.06 0.07 0.12 0.16 0.18 0.23 0.41 0.47 0.54 0.64 0.78 0.67 0.75 0.75 0.75 0.75 0.75 0.75 0.75 45 45 45 46 46 46 47 48 49 49 50 51 68 69 70 78 78 79 79 84 0.08 0.10 0.12 0.21 0.28 0.31 0.40 0.70 0.90 1.0 1.3 1.6 1.8 2.5 3.3 3.8 4.3 5.5 6.7 8.7 1845 1820 1791 1690 1726 1743 1762 1785 1772 1764 1692 1715 1696 1576 1468 1326 1320 1210 1227 688 0.03 0.04 0.05 0.08 0.11 0.12 0.16 0.28 0.36 0.38 0.48 0.59 0.48 0.50 0.50 0.50 0.50 0.50 0.50 0.50 45 45 45 45 46 46 46 47 47 48 48 49 67 68 68 77 77 77 78 84 0.04 0.05 0.07 0.11 0.15 0.17 0.21 0.38 0.48 0.53 0.68 0.84 1.0 1.4 1.8 2.1 2.3 2.9 3.6 4.7 1913 1907 1900 1874 1853 1843 1805 1865 1875 1880 1800 1815 1771 1679 1562 1403 1397 1287 1298 680 0.02 0.02 0.03 0.05 0.06 0.07 0.09 0.16 0.20 0.23 0.27 0.34 0.27 0.27 0.27 0.27 0.27 0.27 0.27 0.27 45 45 45 45 45 45 45 46 46 46 47 47 66 67 67 76 76 76 76 83 12.90 10.20 8.20 6.08 4.83 3.67 3.31 2.58 2.08 4.83 3.67 3.31 2.58 3.67 3.31 1.76 2.58 2.08 1.76 3.67 3.31 1.39 2.58 2.08 1.76 1.39 50/1 50/1 50/1 50/1 50/1 50/1 50/1 50/1 50/1 39/2 39/2 39/2 39/2 35/3 35/3 39/2 35/3 35/3 35/3 31/6 31/6 35/3 31/6 31/6 31/6 31/6 1.1 1.4 1.7 2.3 2.9 3.8 4.2 5.4 6.7 7.4 9.8 10.9 13.9 16.4 18.1 20.4 23.3 28.9 34.1 37.0 41.0 43.1 52.6 65.2 77.0 97.2 1514 1517 1451 1542 1558 1505 1470 1387 1337 1437 1345 1316 1242 1213 1216 1269 1175 1166 978 712 717 897 712 709 709 680 0.36 0.45 0.52 0.73 0.89 1.09 1.18 1.35 1.56 1.55 1.89 2.03 2.38 2.57 2.81 3.48 3.45 4.20 4.11 3.17 3.50 3.75 3.75 3.75 3.75 3.75 48 49 50 51 53 55 55 58 60 72 73 74 76 81 82 78 83 84 85 87 88 86 89 89 90 91 0.72 0.91 1.1 1.5 1.9 2.5 2.8 3.6 4.5 4.9 6.5 7.2 9.3 10.9 12.0 13.6 15.5 19.2 22.7 24.6 27.2 28.6 34.9 43.3 51.2 64.6 1593 1581 1508 1611 1621 1579 1552 1479 1420 1495 1412 1389 1324 1273 1284 1346 1252 1238 1037 704 700 968 696 701 694 665 0.26 0.32 0.36 0.52 0.65 0.79 0.88 1.03 1.19 1.10 1.35 1.45 1.77 1.84 2.02 2.56 2.51 3.04 2.97 2.11 2.32 2.48 2.48 2.48 2.48 2.48 47 47 48 49 50 52 52 54 56 70 71 72 73 79 80 75 81 82 83 86 86 84 87 88 88 89 0.39 0.49 0.61 0.82 1.0 1.4 1.5 1.9 2.4 2.7 3.5 3.9 5.0 5.8 6.5 7.3 8.3 10.3 12.2 13.2 14.6 15.4 18.8 23.3 27.5 34.7 1666 1675 1609 1706 1709 1671 1642 1564 1521 1576 1494 1469 1400 1347 1358 1459 1324 1326 1125 688 692 1051 680 685 678 650 0.15 0.19 0.22 0.31 0.37 0.50 0.53 0.62 0.75 0.65 0.79 0.87 1.05 1.05 1.18 1.55 1.46 1.81 1.80 1.13 1.24 1.35 1.35 1.35 1.35 1.35 46 46 47 47 48 49 49 50 51 68 69 69 70 78 78 72 79 79 80 84 85 81 85 86 86 87 645.00 510.00 410.00 303.85 241.67 183.33 165.38 128.85 103.85 94.25 71.50 64.50 50.25 42.78 38.59 34.29 30.06 24.23 20.52 18.94 17.09 16.25 13.31 10.73 9.09 7.20 IEC Mamax P1max ƞ n 63* 71* 63* 71* 63* 71* 63 71* 63 71* 63 71* 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 63 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 45 - 59 80* 80 80 80 80 80 80 80 80 80 80 80 80 90* 90* 90* 90* 90* 90* 90* 90 90 90 90 90 90 80* 90* 80 90* 90* 100* 112* 90* 80 90* 100* 112* 80 90 100* 112* 80 90 100* 112* 80 90 100* 112* 132* 90 100* 112* 132* 80 90 100* 112* 80 90 100* 112* 80 90 100* 112* 80 90 100 112* 132* 80 90 100 112* 80 90 100 112* 90 100 112 132* 80 90 100 112 132* 90 100 112 132* 90 100 112 132* 80 90 100 112 132 80 90 100 112 80 90 100 112 132* 80 90 100 112 132* 90 100 112 132* 90 100 112 132* 90 100 112 132* IEC bağlantısı yoktur - No IEC assembling on empty fields 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr 101 W - IEC Tip Tahvil Helisel Sonsuz Reduction Helical Worm W Mamax P1max n 2 Type PSH 3125 W mm 111...117 + IEC mm 121...127 iges 7095.12 5055.49 3442.96 2527.75 2057.43 1862.28 1637.95 1475.08 1198.50 928.25 793.81 690.49 607.31 546.92 444.38 380.02 323.00 270.16 236.72 187.50 152.34 130.28 110.99 86.11 69.97 62.60 İ1 150.96 107.56 73.25 53.78 43.78 39.62 34.85 31.38 25.50 19.75 16.89 30.69 26.99 24.31 19.75 16.89 14.39 12.01 10.52 8.33 6.77 5.79 4.93 8.33 6.77 6.06 f B=1 Z2/Z1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 45/2 45/2 45/2 45/2 45/2 45/2 45/2 45/2 45/2 45/2 45/2 45/2 31/3 31/3 31/3 n1= 1400 min f B -1 ƞ W Mamax P1max n 2 1 -1 [min ] [Nm] [kW] 0.20 0.28 0.41 0.55 0.68 0.75 0.85 0.95 1.2 1.5 1.8 2.0 2.3 2.6 3.2 3.7 4.3 5.2 5.9 7.5 9.2 10.7 12.6 16.3 20.0 22.4 3000 3090 3090 3090 3090 3090 3090 3090 3090 3090 3090 2830 2670 3090 2990 2610 2400 2810 2810 2590 2590 2480 2370 1760 1560 1570 0.13 0.19 0.28 0.36 0.45 0.50 0.55 0.61 0.76 0.93 1.10 0.87 0.95 1.22 1.45 1.44 1.52 2.13 2.38 2.75 3.28 3.61 4.00 3.62 3.89 4.00 n1= 930 min f B =1 f B -1 IEC ƞ fB 1 [%] -1 [min ] [Nm] [kW] [%] 47 48 48 49 49 49 50 50 51 52 53 68 68 69 69 70 71 72 73 74 76 77 78 83 84 85 0.13 0.18 0.27 0.37 0.45 0.50 0.57 0.63 0.78 1.0 1.2 1.3 1.5 1.7 2.1 2.4 2.9 3.4 3.9 5.0 6.1 7.1 8.4 10.8 13.3 14.9 3000 3222 3146 3168 3187 3198 3215 3230 3239 3200 3201 2962 2805 3233 3022 2625 2332 2926 2918 2694 2721 2631 2514 1830 1639 1661 0.09 0.13 0.19 0.26 0.31 0.35 0.39 0.43 0.54 0.67 0.79 0.60 0.66 0.86 0.98 0.96 1.03 1.49 1.70 1.96 2.38 2.64 2.64 2.55 2.78 2.64 47 47 48 48 48 48 49 49 49 50 51 67 67 67 68 69 69 70 70 72 73 74 75 81 82 83 71* 71* 71* 71* 71 71 71 71 71 71 71 71 71 71 71 71 71 71 80* 80* 80* 80* 80* 80* 80* 80* 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 45 - 59 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90 90 90 90 90 90 90 90 90 90 100* 100* 100* 100 100 100 100 100 100 112* 112* 112* 112* 112* 112 112* 112* 112 IEC bağlantısı yoktur - No IEC assembling on empty fields 102 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr W - IEC Tahvil Tip W Helisel Sonsuz Reduction Helical Worm PSH 3125 W mm 111...117 + IEC mm 121...127 iges İ1 7095.12 150.96 5055.49 107.56 3442.96 73.25 2527.75 53.78 2057.43 43.78 1862.28 39.62 1637.95 34.85 1475.08 31.38 1198.50 25.50 928.25 19.75 793.81 16.89 690.49 30.69 607.31 26.99 546.92 24.31 444.38 19.75 380.02 16.89 323.00 14.39 270.16 12.01 236.72 10.52 187.50 8.33 152.34 6.77 130.28 5.79 110.99 4.93 86.11 8.33 69.97 6.77 62.60 6.06 fB =1 Z2/Z1 -1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 45/2 45/2 45/2 45/2 45/2 45/2 45/2 45/2 45/2 45/2 45/2 45/2 31/3 31/3 31/3 -1 Mamax P1max ƞ n 2 Type n1= 700 min f B W n1= 465 min -1 Mamax P1max ƞ n 2 1 fB =1 -1 f B W n1= 250 min -1 2 1 fB =1 -1 f B [kW] [%] [min ] [Nm] [kW] [%] [min ] [Nm] [kW] [%] 3000 3388 3204 3206 3235 3252 3276 3299 3325 3315 3306 3027 2875 3324 2977 2587 2298 2998 3001 2772 2786 2705 2599 1884 1678 1705 0.07 0.11 0.14 0.20 0.24 0.27 0.31 0.34 0.41 0.53 0.61 0.48 0.54 0.68 0.74 0.72 0.78 1.18 1.37 1.53 1.89 2.12 2.00 2.00 2.17 2.00 47 47 47 48 48 48 48 48 49 49 50 66 67 67 67 68 68 69 69 70 71 72 73 80 81 82 0.05 0.07 0.11 0.13 0.17 0.18 0.20 0.24 0.29 0.38 0.44 0.33 0.36 0.46 0.47 0.48 0.50 0.84 0.96 1.11 1.37 1.52 1.32 1.34 1.52 1.32 47 47 47 47 47 47 48 48 48 48 49 66 66 66 66 67 67 67 68 68 69 70 71 79 80 80 0.03 0.04 0.06 0.08 0.10 0.11 0.12 0.14 0.16 0.21 0.24 0.19 0.20 0.25 0.26 0.26 0.27 0.49 0.58 0.62 0.77 0.87 0.72 0.72 0.87 0.72 47 47 47 47 47 47 47 47 47 48 48 65 65 66 66 66 66 66 66 67 67 68 68 78 78 78 0.07 0.09 0.14 0.18 0.23 0.25 0.28 0.32 0.39 0.50 0.59 0.67 0.77 0.85 1.0 1.2 1.4 1.7 2.0 2.5 3.1 3.6 4.2 5.4 6.6 7.4 3000 3569 3475 3364 3286 3309 3342 3374 3420 3439 3453 3097 2952 3396 2933 2549 2265 3146 3132 2880 2916 2824 2706 1866 1756 1782 0.04 0.05 0.07 0.10 0.12 0.13 0.15 0.17 0.21 0.27 0.31 0.36 0.41 0.46 0.56 0.66 0.77 0.93 1.1 1.3 1.6 1.9 2.3 2.9 3.6 4.0 3000 3714 3691 3665 3641 3628 3608 3589 3380 3538 3571 3282 3063 3396 2933 2511 2231 3302 3312 3073 3096 2986 2849 1842 1810 1810 fB 1 [min ] [Nm] 0.10 0.14 0.20 0.28 0.34 0.38 0.43 0.47 0.58 0.75 0.88 1.0 1.2 1.3 1.6 1.8 2.2 2.6 3.0 3.7 4.6 5.4 6.3 8.1 10.0 11.2 IEC Mamax P1max ƞ n 71* 71* 71* 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 80* 80* 80* 80* 80* 80* 80* 80* 80* 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 45 - 59 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90* 90 90 90 90 90 90 90 90 90 100* 100* 100* 100* 100 100 100 100 100 112* 112* 112* 112* 112* 112* 112* 112* 112 IEC bağlantısı yoktur - No IEC assembling on empty fields 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr 103 W - IEC Tip Tahvil Helisel Sonsuz Reduction Helical Worm W Mamax P1max n 2 Type PSH 2125 W mm 110...116 + IEC mm 120...126 iges 695.60 495.64 337.55 247.82 201.71 182.58 160.58 144.62 117.50 100.48 87.40 76.88 69.23 56.25 48.10 40.98 35.31 31.79 25.83 22.09 18.82 15.90 14.54 12.92 11.05 9.41 8.44 7.75 7.27 İ1 14.80 10.55 7.18 5.27 4.29 3.88 3.42 3.08 2.50 2.14 3.88 3.42 3.08 2.50 2.14 1.82 3.42 3.08 2.50 2.14 1.82 3.08 1.41 2.50 2.14 1.82 1.63 1.50 1.41 f B=1 Z2/Z1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 45/2 45/2 45/2 45/2 45/2 45/2 31/3 31/3 31/3 31/3 31/3 31/6 31/3 31/6 31/6 31/6 31/6 31/6 31/6 n1= 1400 min f B -1 ƞ W Mamax P1max n 2 1 -1 [min ] [Nm] [kW] 2.0 2.8 4.1 5.6 6.9 7.7 8.7 9.7 11.9 13.9 16.0 18.2 20.2 24.9 29.1 34.2 39.6 44.0 54.2 63.4 74.4 88.1 96.3 108.4 126.7 148.8 165.9 180.6 192.6 2850 2850 2850 2760 2630 2560 2470 2390 2240 2130 2360 2290 2220 2060 1960 1840 1600 1840 1710 1610 1510 1240 1340 1240 1240 1140 1140 1010 940 1.11 1.49 2.07 2.61 2.92 3.13 3.36 3.57 3.93 4.31 4.94 5.39 5.80 6.47 7.11 7.75 7.54 9.63 10.90 11.88 13.07 12.43 14.85 15.00 15.00 15.00 15.00 15.00 15.00 n1= 930 min f B =1 f B -1 IEC ƞ fB 1 [%] -1 [min ] [Nm] [kW] [%] 54 56 59 62 65 66 67 68 71 72 80 81 81 83 84 85 88 88 89 90 90 92 91 92 93 93 93 93 93 1.3 1.9 2.8 3.8 4.6 5.1 5.8 6.4 7.9 9.3 10.6 12.1 13.4 16.5 19.3 22.7 26.3 29.3 36.0 42.1 49.4 58.5 64.0 72.0 84.2 98.8 110.2 120.0 127.9 2968 2960 2985 2932 2781 2700 2615 2549 2419 2319 2489 2424 2368 2225 2134 2024 1694 1962 1847 1753 1661 1300 1506 1314 1297 1254 1234 1129 1057 0.79 1.11 1.56 2.01 2.23 2.36 2.52 2.67 3.03 3.32 3.59 3.94 4.26 4.81 5.32 5.87 5.42 7.00 8.00 8.78 9.66 8.85 11.21 9.90 9.90 9.90 9.90 9.90 9.90 51 53 56 58 60 61 63 64 66 68 77 78 78 80 81 82 86 86 87 88 89 90 90 91 92 92 92 93 93 90* 90* 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 45 - 59 100* 112* 100* 112* 132* 132* 100* 112* 100 112* 100 112* 100 112* 132* 100 112* 132* 100 112 132* 100 112 132* 100 112 132* 100 112 132* 100 112 132* 100 112 132* 100 112 132* 100 112 132* 100 112 132 100 112 132 100 112 132 100 112 132 100 112 132 132 100 112 132 100 112 132 100 112 132 132 132 132 160* 160* 160* 160* 160* 160* 160* 160* 160* 160* 160* 160* 160* 160 160 160 160 160 160 IEC bağlantısı yoktur - No IEC assembling on empty fields 104 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr W - IEC Tahvil Tip W Helisel Sonsuz Reduction Helical Worm iges İ1 fB =1 Z2/Z1 -1 [min ] [Nm] PSH 2125 W mm 110...116 + IEC mm 120...126 695.60 495.64 337.55 247.82 201.71 182.58 160.58 144.62 117.50 100.48 87.40 76.88 69.23 56.25 48.10 40.98 35.31 31.79 25.83 22.09 18.82 15.90 14.54 12.92 11.05 9.41 8.44 7.75 7.27 14.80 10.55 7.18 5.27 4.29 3.88 3.42 3.08 2.50 2.14 3.88 3.42 3.08 2.50 2.14 1.82 3.42 3.08 2.50 2.14 1.82 3.08 1.41 2.50 2.14 1.82 1.63 1.50 1.41 47/1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 47/1 45/2 45/2 45/2 45/2 45/2 45/2 31/3 31/3 31/3 31/3 31/3 31/6 31/3 31/6 31/6 31/6 31/6 31/6 31/6 -1 Mamax P1max ƞ n 2 Type n1= 700 min 1.0 1.4 2.1 2.8 3.5 3.8 4.4 4.8 6.0 7.0 8.0 9.1 10.1 12.4 14.6 17.1 19.8 22.0 27.1 31.7 37.2 44.0 48.1 54.2 63.3 74.4 82.9 90.3 96.3 3041 3044 3056 3023 2891 2820 2729 2648 2513 2427 2599 2530 2459 2311 2233 2136 1767 2008 1918 1834 1753 1285 1599 1300 1283 1251 1220 1196 1122 f B W n1= 465 min -1 Mamax P1max ƞ n 2 1 fB =1 -1 f B W n1= 250 min Mamax P1max ƞ n 2 1 fB =1 -1 [kW] [%] [min ] [Nm] [kW] [%] [min ] [Nm] 0.64 0.86 1.24 1.58 1.83 1.90 2.10 2.18 2.51 2.74 2.90 3.21 3.42 3.85 4.32 4.78 4.36 5.44 6.33 7.00 7.85 6.65 9.05 7.50 7.50 7.50 7.50 7.50 7.50 50 52 54 56 58 59 60 61 63 65 75 75 76 78 79 80 84 85 86 87 87 89 89 90 91 91 91 92 92 0.44 0.63 0.92 1.18 1.34 1.40 1.56 1.65 1.90 2.07 2.10 2.29 2.51 2.85 3.17 3.48 3.14 3.61 4.37 5.04 5.65 4.42 6.64 4.95 4.95 4.95 4.95 4.95 4.95 49 50 51 53 54 55 56 57 59 60 72 73 73 75 76 77 82 83 84 84 85 88 87 88 89 90 90 90 91 0.67 0.94 1.4 1.9 2.3 2.5 2.9 3.2 4.0 4.6 5.3 6.0 6.7 8.3 9.7 11.3 13.2 14.6 18.0 21.1 24.7 29.2 32.0 36.0 42.1 49.4 55.1 60.0 64.0 3068 3177 3196 3152 3010 2950 2874 2807 2678 2579 2720 2665 2608 2462 2373 2263 1862 1960 1949 1917 1857 1271 1725 1271 1255 1238 1207 1207 1189 -1 0.36 0.50 0.74 1.0 1.2 1.4 1.6 1.7 2.1 2.5 2.9 3.3 3.6 4.4 5.2 6.1 7.1 7.9 9.7 11.3 13.3 15.7 17.2 19.3 22.6 26.6 29.6 32.3 34.4 3005 3359 3399 3322 3186 3122 3041 2970 2831 2756 2878 2820 2759 2604 2536 2450 1904 1890 1880 1872 1829 1242 1801 1242 1226 1196 1180 1180 1150 f B 1 [kW] [%] 0.24 0.37 0.54 0.70 0.78 0.88 0.98 1.00 1.15 1.31 1.27 1.39 1.49 1.69 1.92 2.14 1.77 1.95 2.36 2.70 3.11 2.37 3.86 2.70 2.70 2.70 2.70 2.70 2.70 48 48 49 50 51 52 52 53 54 55 69 70 70 71 72 73 80 80 81 82 82 86 84 86 87 87 88 88 88 IEC fB 45 - 59 90* 90* 100* 112* 100* 112* 132* 132* 90 100* 112* 90 100* 112* 90 100* 112* 90 100 112* 132* 90 100 112* 132* 90 100 112* 132* 90 100 112* 132* 90 100 112 132* 90 100 112 132* 90 100 112 132* 90 100 112 132* 90 100 112 132* 90 100 112 132* 90 100 112 132 90 100 112 132 90 100 112 132 90 100 112 132 90 100 112 132 132 90 100 112 132 90 100 112 132 90 100 112 132 132 132 132 160* 160* 160* 160* 160* 160* 160* 160* 160* 160* 160* 160* 160* 160* 160* 160* 160* 160 160 IEC bağlantısı yoktur - No IEC assembling on empty fields 63 IEC bağlantısı yapılır - IEC assembling available on numbered fields 80* IEC bağlantısı yapılacaksa P1max değerleri aşılmamalıdır - Do not exceed the P1max values indicated on fields with asterisk www.pgr.com.tr 105 W - IEC Ölçü Sayfaları Dimension Tables of W - IEC W IEC www.pgr.com.tr 107 İKİ KADEME DOUBLE REDUCTION PSH 2040 TMA ...W 280 170 110 64 23 80 100 100 40 20 Ø9 4 18 144 Ø20 k6 32 5 Ø16 k6 4 80 20 0,5 100 11 80 3 120 24 11 20 40 M5 11 20 28 40 55 27 90 110 87 63 40 32 M6 6 22,5 4 PSH 2040 TMG/B5 ...W 280 115 110 60 64 32 82 5 0,5 Ø16 k6 18 Ø20 k6 1 4 Øa1 40 4 Øe 144 75 Øb1 j6 170 M5 f1 Øs1 c1 40 40 32 M6 6 22,5 4 108 a1 b1 c1 e1 f1 s1 120 80 10 100 3,0 7 160 110 10 130 3,5 9 www.pgr.com.tr İKİ KADEME DOUBLE REDUCTION PSH 2040 DG/B14 ...W 22,8 110 64 6 Ø35 280 170 Ø20 H7 120 60 28 28 60 3 3 40 4 74 32 5 Ø16 k6 0,5 4 M5 82 144 90 18 M6x10 Ø75 PSH 2040 DG/B5 ...W 280 110 60 3 15 3 40 Øe 1 5 Ø16 k6 0,5 82 32 18 Øb1 j6 4 144 60 4 Øa1 170 64 M5 f1 Øs1 22,8 75 6 Ø20 H7 Ø35 120 28 www.pgr.com.tr c1 28 a1 b1 c1 e1 f1 s1 120 80 10 100 3,0 7 160 110 10 130 3,5 9 109 İKİ KADEME DOUBLE REDUCTION tH mH Øa1 uH ØD ØdH m1 Øe1 IH l1 x1 xH xH f1 f1 IH ØD ME Ød1 Øb1 j6 T1 h p m1 t1 q1 w1 u1 Øs1 q v1 o c1 m m c1 k Tip Montaj Ölçüleri (Flanş) Ana Ölçüler Çıkış Şaftı Giriş Şaftı Mounting Dimensions (Flange) Outline Dimensions Output Shaft Input Shaft Type dH* tH* a1 b1 c1 e1 f1 s1 h k m m1 o p q D PSH 2050 DG/B14 + W 132 95 6 115 3 M8 x 13 100 303 60 66 122 188 181 71 7.5 PSH 2080 DG/B14 + W PSH 2100 DG/B14 + W PSH 2125 DG/B14 + W d1 t1 140 95 7 115 3 M8 x 13 121 319 67 74 122 206.5 197 76 13.0 IH mH l1 u1 w1 T1 25 28.3 8 3 30* 33.3* 8* 45 PSH 2063 DG/B14 + W uH* xH v1 x1 q1 ME 45 16 18.0 4 7 40 5 32 M5 132 30 33.3 8 4 35* 38.3* 10* 16 18.0 4 7 40 5 32 M5 192 130 9 165 4 M10 x 16 146 365 75 84 122 254 243 102 19.0 50 50 148 40 43.3 12 5 45* 48.8* 14* 16 18.0 4 7 40 5 32 M5 238 180 9 215 4 M12 x 20 182 459 92 101 172 316 287 123 24.0 65 55 168 50 53.8 14 5 60* 64.4* 18* 24 27.0 5 8 50 8 40 M8 292 230 10 265 4 M12 x 20 224 567 115 125 213 388 354 151 39.0 85 70 202 60 64.4 18 6 70* 74.9* 20* 38 41.0 5 8 80 10 70 M12 95 89 250 *Opsiyonel delik milli şaft *Optional hollow shaft 110 www.pgr.com.tr ÜÇ KADEME TRIPLE REDUCTION tH mH m1 Øe1 uH ØdH ØD Øa1 IH m1 xH xH f1 f1 IH l1 ØD Ød1 ME h p Øb1 T1 x1 t1 q1 w1 u1 Øs1 q z v1 o c1 m m c1 k Montaj Ölçüleri (Flanş) Ana Ölçüler Çıkış Şaftı Giriş Şaftı Mounting Dimensions (Flange) Outline Dimensions Output Shaft Input Shaft Tip Type dH* tH* a1 b1 c1 e1 f1 s1 h k m m1 o p q D PSH 3050 DG/B14 + W PSH 3080 DG/B14 + W PSH 3100 DG/B14 + W PSH 3125 DG/B14 + W d1 t1 v1 x1 IH mH l1 u1 w1 T1 132 95 6 115 3 M8 x 13 100 361 60 66 122 188 181 58 71 37.5 25 28.3 8 30* 33.3* 8* 3 16 18.0 4 7 40 5 32 M5 140 95 7 115 3 M8 x 13 121 377 67 74 122 206.5 197 58 76 43.0 30 33.3 8 4 35* 38.3* 10* 16 18.0 4 7 40 5 32 M5 192 130 9 165 4 M10 x 16 146 423 75 84 122 254 243 58 102 49.0 50 50 148 40 43.3 12 5 45* 48.8* 14* 16 18.0 4 7 40 5 32 M5 238 180 9 215 4 M12 x 20 182 469 92 101 122 316 287 60 123 74.0 65 55 168 50 53.8 14 5 60* 64.4* 18* 16 18.0 4 7 40 5 32 M5 292 230 10 265 4 M12 x 20 224 595 115 125 172 388 354 69 151 100 85 70 202 60 64.4 18 6 70* 74.9* 20* 24 27.0 5 8 50 8 40 M8 45 PSH 3063 DG/B14 + W uH* xH z q1 ME 95 45 89 132 250 *Opsiyonel delik milli şaft *Optional hollow shaft www.pgr.com.tr 111 İKİ KADEME DOUBLE REDUCTION k q m o q1 m l l x c1 x l1 x1 T Ød p Ød1 ME c r1 h a e1 n1 T1 Øs n b r i3 f a e t t1 w u u1 w1 v1 v Tip Montaj Ölçüleri (Ayak) Ana Ölçüler Çıkış Şaftı Giriş Şaftı Mounting Dimensions (Foot) Outline Dimensions Output Shaft Input Shaft Type c a e b n r s f c1 e1 h i i3 k m o p q n1 r1 d t v x d1 t1 v1 x1 I u w T l1 u1 w1 T1 q1 ME PSH 2050 TMA +W 80 100 15 121 122 40 35 11 100 65 54 308 115 122 179 15 117 30 35 186 4 16 18.0 4 7 75 7.5 25 28.0 5 50 8 40 M10 40 5 32 M5 PSH 2063 TMA +W 100 110 17 141 138 40 45 11 112 79 65 323 134 122 193.5 201 17 141 40 35 80 13.0 30 33.0 5 5 16 18.0 4 7 60 8 50 M10 40 5 32 M5 PSH 2080 TMA +W 130 130 21 179 160 40 60 14 140 95 80 364 160 122 229 21 171 40 40 242 100 19.0 35 38.0 5 6 16 18.0 4 7 70 10 60 M12 40 5 32 M5 PSH 2100 TMA +W 135 150 29 186 190 50 75 18 180 120 100 462 195 172 293 26 184 48 70 290 125 24.0 45 48.5 5 5 24 27.0 5 8 90 14 80 M16 50 8 40 M8 PSH 2125 TMA +W 180 200 36 244 250 70 92 22 225 155 130 567 255 213 356 31 241 60 82 354 150 39.0 60 64.0 10 8 38 41.0 5 8 120 18 100 M20 80 10 70 M12 112 www.pgr.com.tr ÜÇ KADEME TRIPLE REDUCTION k q m o z q1 m l l x c1 x l1 T x1 Ød p c r1 h Ød1 ME a e1 n1 T1 Øs n b r f a e t1 i3 t w u u1 w1 v1 v Tip Montaj Ölçüleri (Ayak) Ana Ölçüler Çıkış Şaftı Giriş Şaftı Mounting Dimensions (Foot) Outline Dimensions Output Shaft Input Shaft Type c a e b n r f c1 e1 i s h n1 r1 q k m o z p i3 q1 d t v x d1 t1 v1 x1 I u w T l1 u1 w1 T1 ME 4 16 18.0 4 7 186 58 37.5 25 28.0 5 50 8 40 M10 40 5 32 M5 75 PSH 3050 TMA +W 80 100 15 121 122 40 35 11 100 15 117 30 35 65 54 366 115 122 PSH 3063 TMA +W 100 110 17 141 138 40 45 11 112 17 141 40 35 79 65 5 16 18.0 4 7 381 134 122 193.5 201 58 43.0 30 33.0 5 60 8 50 M10 40 5 32 M5 80 PSH 3080 TMA +W 130 130 21 179 160 40 60 14 140 21 171 40 40 95 80 422 160 122 229 6 16 18.0 4 7 242 58 49.0 35 38.0 5 70 10 60 M12 40 5 32 M5 100 PSH 3100 TMA +W 135 150 29 186 190 50 75 18 180 120 26 184 48 70 100 472 195 122 293 5 16 18.0 4 7 290 60 74.0 45 48.5 5 90 14 80 M16 40 5 32 M5 125 PSH 3125 TMA +W 180 200 36 244 250 70 92 22 225 155 31 241 60 82 130 595 255 172 356 354 69 100 60 64.0 10 8 24 27.0 5 8 120 18 100 M20 50 8 40 M8 150 www.pgr.com.tr 179 113 İKİ KADEME DOUBLE REDUCTION l Øs1 T x1 Øa1 p h ME Ød1 Ød T1 Øb1 h6 l1 Øe1 f1 q1 c1 q m o i2 m1 k t1 t w u u1 w1 v1 v Montaj Ölçüleri (Flanş) Ana Ölçüler Çıkış Şaftı Giriş Şaftı Mounting Dimensions (Flange) Outline Dimensions Output Shaft Input Shaft Tip Type a1 114 b1 c1 e1 f1 s1 h i2 k m1 m o p q d t v I u w T d1 t1 v1 x1 q1 ME l1 u1 w1 T1 25 28.0 5 M10 16 18.0 4 7 50 8 40 40 5 32 M5 PSH 2050 TMG/B5 + W 160 110 10 130 3.5 9 100 50 303 135 63 122 PSH 2063 TMG/B5 + W 200 130 12 165 3.5 11 121 60 319 156 70 122 206.5 197 76 13.0 30 33.0 5 M10 16 18.0 4 7 60 8 50 40 5 32 M5 PSH 2080 TMG/B5 + W 200 130 12 165 3.5 11 146 70 365 184 79 122 254 243 102 19.0 35 38.0 7 M12 16 18.0 4 7 70 10 56 40 5 32 M5 PSH 2100 TMG/B5 + W 250 180 16 215 4 14 182 90 459 232 96 172 316 287 123 24.0 45 48.5 5 M16 24 27.0 5 8 90 14 80 50 8 40 M8 PSH 2125 TMG/B5 + W 350 250 20 300 5 18 224 120 567 307 119 213 388 354 151 39.0 60 64.0 10 M20 38 41.0 5 8 120 18 100 80 10 70 M12 188 181 71 7.5 www.pgr.com.tr ÜÇ KADEME TRIPLE REDUCTION l Øs1 T x1 Øe1 Øa1 Ød p h Ød1 ME T1 Øb1 h6 l1 f1 q1 c1 q z m o i2 m1 k t1 w t u u1 w1 v1 Tip v Montaj Ölçüleri (Flanş) Ana Ölçüler Çıkış Şaftı Giriş Şaftı Mounting Dimensions (Flange) Outline Dimensions Output Shaft Input Shaft Type a1 b1 c1 e1 f1 s1 h i2 k m m1 o p q z d t v I u w T d1 t1 v1 x1 q1 ME l1 u1 w1 T1 188 181 58 71 37.5 25 28.0 5 M10 16 18.0 4 7 50 8 40 40 5 32 M5 PSH 3050 TMG/B5 + W 160 110 10 130 3.5 9 100 50 361 63 135 122 PSH 3063 TMG/B5 + W 200 130 12 165 3.5 11 121 60 377 70 156 122 206.5 197 58 76 43.0 30 33.0 5 M10 16 18.0 4 7 60 8 50 40 5 32 M5 PSH 3080 TMG/B5 + W 200 130 12 165 3.5 11 146 70 423 79 184 122 254 243 58 102 49.0 35 38.0 7 M12 16 18.0 4 7 70 10 56 40 5 32 M5 PSH 3100 TMG/B5 + W 250 180 16 215 4 14 182 90 469 96 232 122 316 287 60 123 74.0 45 48.5 5 M16 16 18.0 4 7 90 14 80 40 5 32 M5 PSH 3125 TMG/B5 + W 350 250 20 300 5 18 224 120 595 119 307 172 388 354 69 151 100 60 64.0 10 M20 24 27.0 5 8 120 18 100 50 8 40 M8 www.pgr.com.tr 115 İKİ KADEME DOUBLE REDUCTION tH uH ØD ØdH mH c1 IH Øe1 IF IH Øs1 m1 Øs1 m1 f1 xH xH f3 f3 x1 l1 Øe1 Øa1 Øb1 h6 p h ME Ød1 ØD T1 mK PSH 2125 Ø450 B5 q1 m q m o k t1 u1 w1 v1 Tip Montaj Ölçüleri (Flanş) Ana Ölçüler Çıkış Şaftı Giriş Şaftı Mounting Dimensions (Flange) Outline Dimensions Output Shaft Input Shaft Type dH* tH* uH* xH a1 b1 c1 e1 h f1 s1 k m m1 mK o IF p q D PSH 2050 DG/B5 + W 200 130 12 165 3.5 11 PSH 2063 DG/B5 + W 200 130 12 165 3.5 11 PSH 2080 DG/B5 + W 250 180 15 300 230 20 215 4 14 265 4 14 PSH 2100 DG/B5 + W 350 250 20 300 5 18 PSH 2125 DG/B5 + W 400 300 20 450 350 22 350 5 18 400 5 18 100 303 60 66 39 122 45 188 181 71 38 122 45 206.5 197 76 IH mH 3 7.5 25 28.3 8 30* 33.3* 8* 45 3 13.0 30 35* 50 146 365 75 84 44 122 53 254 243 102 4 19.0 40 45* 65 182 459 92 101 48 172 57 316 287 123 4 24.0 50 60* 85 224 567 115 125 50 213 60 388 354 151 4 39.0 60 70* 95 121 319 67 74 d1 t1 v1 x1 q1 f3 ME 45 132 33.3 8 38.3* 10* 50 148 43.3 12 48.8* 14* 55 168 53.8 14 64.4* 18* 70 202 64.4 18 74.9* 20* 89 250 l1 u1 w1 T1 3 16 18.0 4 7 40 5 32 M5 4 16 18.0 4 7 40 5 32 M5 5 16 18.0 4 7 40 5 32 M5 5 24 27.0 5 8 50 8 40 M8 6 38 41.0 5 8 80 10 70 M12 *Opsiyonel delik milli şaft *Optional hollow shaft 116 www.pgr.com.tr ÜÇ KADEME TRIPLE REDUCTION tH uH IF IH Øs1 c1 m1 IH Øs1 m1 f1 xH xH f3 f3 T1 h p Ød1 ME ØD x1 Øa1 l1 Øe1 Øb1 h6 Øe1 ØdH ØD mH PSH 3125 Ø450 B5 mK q1 q z m o m k t1 u1 w1 v1 Tip Montaj Ölçüleri (Flanş) Mounting Dimensions (Flange) Ana Ölçüler Çıkış Şaftı Giriş Şaftı Outline Dimensions Output Shaft Input Shaft Type dH* tH* uH* xH a1 b1 c1 e1 f1 h s1 k m m1 mK o IF p q z D PSH 3050 DG /B5 + W 200 130 12 165 3.5 11 PSH 3063 DG/B5 + W 200 130 12 165 3.5 11 PSH 3080 DG/B5 + W 250 180 15 215 300 230 20 265 4 4 14 14 PSH 3100 DG/B5 + W 350 250 20 300 5 18 PSH 3125 DG/B5 + W 400 300 20 350 450 350 22 400 5 5 18 18 d1 t1 v1 x1 q1 f3 ME IH mH 100 361 60 66 39 122 45 188 181 58 71 3 37.5 25 28.3 8 30* 33.3* 8* 45 121 377 67 74 38 122 45 206.5 197 58 76 3 43.0 30 35* 50 146 423 75 84 44 122 53 254 243 58 102 4 49.0 40 45* 65 182 469 92 101 48 122 57 316 287 60 123 4 74.0 50 60* 85 224 595 115 125 50 172 60 388 354 69 151 4 100 60 70* 95 45 33.3 38.3* 50 43.3 48.8* 55 53.8 64.4* 70 64.4 74.9* 89 132 8 10* 148 12 14* 168 14 18* 202 18 20* 250 l1 u1 w1 T1 3 16 18.0 4 7 40 5 32 M5 4 16 18.0 4 7 40 5 32 M5 5 16 18.0 4 7 40 5 32 M5 5 16 18.0 4 7 40 5 32 M5 6 24 27.0 5 8 50 8 40 M8 *Opsiyonel delik milli şaft *Optional hollow shaft www.pgr.com.tr 117 İKİ KADEME DOUBLE REDUCTION PSH 2040 TMA ...IEC (k) (o) 170 Øe2 64 23 80 l1 100 20 Øs2 f2 24 100 t1 3 Ø20 k6 Ø9 Øa2 Øb2 H7 Ød1 11 40 80 20 0,5 80 100 11 144 u1 20 11 120 20 27 87 63 40 32 22,5 M6 6 28 40 55 90 110 4 PSH 2040 TMG/B5 ...IEC (k) Øe2 115 Øs2 l1 f2 t1 Ø20 k6 Ød1 Øb2 H7 Øa2 0,5 82 144 75 u1 Øe 1 60 Øb1 j6 64 Øa1 (o) 170 f1 c1 Øs1 40 40 32 M6 6 22,5 4 63 71 80 90 a1 b1 c1 e1 f1 s1 k 255 255 273 273 120 80 10 100 3,0 7 o 85 85 103 103 160 110 10 130 3,5 9 Motor Bağlantı Ölçüleri Motor Büyüklüğü Motor Frame Size 63 71 80 90 118 Kama Ölçüleri Motor Mounting Dimensions Key a2 b2 e2 f2 s2 d1 l1 t1 u1 140 160 200 200 95 110 130 130 115 130 165 165 3.5 4.0 4.0 4.0 M8 M8 M10 M10 11 14 19 24 23 30 40 50 12.8 16.3 21.8 27.3 4 5 6 8 A A A A 4x4x18 5x5x25 6x6x35 8x7x40 Kaplin Tipi Type of coupling Çiftel KTR DK - 14 DK - 14 DK - 24 DK - 24 BJ - 14 BJ - 14 BJ - 24 BJ - 24 www.pgr.com.tr İKİ KADEME DOUBLE REDUCTION PSH 2040 DG/B14 ...IEC (k) Øe2 (o) 170 Øs2 l1 f2 60 t1 60 3 3 Øa2 Øb2 H7 Ød1 0,5 82 144 90 u1 74 64 M6x10 Ø75 22,8 6 Ø35 Ø20 H7 120 28 28 PSH 2040 DG/B5 ...IEC (k) Øe2 (o) 170 Øs2 60 l1 f2 64 t1 15 3 3 Øa1 Ød1 Øb2 H7 Øa2 0,5 82 144 Øb1 j6 u1 Øe 1 60 f1 c1 Øs1 75 22,8 6 Ø35 Ø20 H7 120 28 28 63 71 80 90 a1 b1 c1 e1 f1 s1 k 255 255 273 273 120 80 10 100 3,0 7 o 85 85 103 103 160 110 10 130 3,5 9 Motor Bağlantı Ölçüleri Motor Büyüklüğü Motor Mounting Dimensions Motor Frame Size a2 63 71 80 90 www.pgr.com.tr Kama Ölçüleri 140 160 200 200 b2 95 110 130 130 e2 115 130 165 165 f2 3.5 4.0 4.0 4.0 s2 M8 M8 M10 M10 d1 11 14 19 24 Key l1 23 30 40 50 t1 12.8 16.3 21.8 27.3 u1 4 5 6 8 A A A A 4x4x18 5x5x25 6x6x35 8x7x40 Kaplin Tipi Type of coupling Çiftel KTR DK - 14 DK - 14 DK - 24 DK - 24 BJ - 14 BJ - 14 BJ - 24 BJ - 24 119 İKİ KADEME DOUBLE REDUCTION tH uH ØD ØdH mH Øa1 IH l1 Øe1 m1 IH m1 xH xH f1 f1 Øe2 Øs2 ØD Øb1 j6 u1 Øa2 Øb2 H7 h p ME Ød1 t1 q1 f2 Øs1 q o c1 m m c1 k Tip Montaj Ölçüleri (Flanş) Ana Ölçüler Şaft Ölçüleri Mounting Dimensions (Flange) Outline Dimensions Shaft Dimensions Type dH* tH* uH* xH a1 b1 c1 e1 f1 s1 h k m m1 o p q q1 ME 188 D IH mH PSH 2050 DG/B14 + IEC - IEC 63 132 95 - IEC 71 - IEC 80 - IEC 90 6 115 3 M8 x 13 100 266 270 286 286 60 66 85 89 105 105 181 71 7.5 25 28.3 8 30* 33.3* 8* PSH 2063 DG/B14 + IEC - IEC 63 - IEC 71 - IEC 80 - IEC 90 - IEC 100 - IEC 63 - IEC 71 - IEC 80 - IEC 90 - IEC 100 - IEC 112 - IEC 71 - IEC 80 - IEC 90 - IEC 100 - IEC 112 - IEC 132 - IEC 90 - IEC 100 - IEC 112 - IEC 132 - IEC 160 140 95 7 115 3 M8 x 13 121 282 286 302 302 327 328 332 348 348 373 373 375 394 394 411 411 443 463 487 487 544 548 67 74 85 206.5 197 89 105 105 130 85 254 243 89 105 105 130 130 88 316 287 107 107 124 124 156 109 388 354 133 133 190 194 76 13.0 30 33.3 8 35* 38.3* 10* PSH 2080 DG/B14 + IEC PSH 2100 DG/B14 + IEC PSH 2125 DG/B14 + IEC 192 130 238 180 9 9 165 215 292 230 10 265 4 M10 x 16 146 4 M12 x 20 182 4 M12 x 20 224 92 115 84 101 125 Motor Bağlantı Ölçüleri Motor Büyüklüğü 50 102 123 b2 e2 f2 s2 d1 l1 t1 u1 140 160 200 200 250 250 300 350 95 110 130 130 180 180 230 250 115 130 165 165 215 215 265 300 3.5 4.0 4.0 4.0 5.0 5.0 5.0 6.0 M8 M8 M10 M10 M12 M12 M12 M16 11 14 19 24 28 28 38 42 23 30 40 50 60 60 80 110 12.8 16.3 21.8 27.3 31.3 31.3 41.3 45.3 4 5 6 8 8 8 10 12 A A A A A A A A 24.0 151 4x4x18 5x5x25 6x6x35 8x7x40 8x7x50 8x7x50 10x8x60 12x8x75 39.0 45 50 132 55 89 5 202 60 64.4 18 70* 74.9* 20* 95 5 168 50 53.8 14 60* 64.4* 18* 70 4 148 40 43.3 12 45* 48.8* 14* 85 Key a2 19.0 65 Kama Ölçüleri Motor Mounting Dimensions Motor Frame Size 63 71 80 90 100 112 132 160 75 45 3 6 250 Kaplin Tipi Type of coupling Çiftel KTR DK - 14 DK - 14 DK - 24 DK - 24 DK - 28 DK - 28 DK - 38 DK - 42 BJ - 14 BJ - 14 BJ - 24 BJ - 24 BJ - 28 BJ - 28 BM - 38 BM - 42 *Opsiyonel delik milli şaft *Optional hollow shaft 120 www.pgr.com.tr ÜÇ KADEME TRIPLE REDUCTION tH Øa1 uH ØD ØdH mH m1 IH IH l1 Øe1 m1 xH xH f1 f1 Øe2 Øs2 ØD Øb1 j6 u1 Øa2 Øb2 H7 Ød1 h p ME t1 q1 Øs1 q z f2 o c1 k Tip m c1 m Montaj Ölçüleri (Flanş) Ana Ölçüler Şaft Ölçüleri Mounting Dimensions (Flange) Outline Dimensions Shaft Dimensions Type a1 b1 c1 e1 f1 s1 h k m m1 o p q q1 z dH* tH* uH* xH D IH mH ME PSH 3050 - IEC 63 132 95 - IEC 71 DG/B14 + IEC 6 115 3 M8x13 100 324 328 60 66 85 89 188 181 71 58 37.5 PSH 3063 - IEC 63 140 95 - IEC 71 DG/B14 + IEC 7 115 3 M8x13 121 340 344 67 74 85 206.5 197 76 89 58 43.0 45 45 132 30 33.3 8 35* 38.3* 10* 4 PSH 3080 - IEC 63 192 130 - IEC 71 DG/B14 + IEC 9 165 4 M10 x 16 146 386 390 75 84 85 89 254 243 102 58 49.0 50 50 148 40 43.3 12 45* 48.8* 14* 5 PSH 3100 DG/B14 + IEC - IEC 63 238 180 - IEC 71 - IEC 80 - IEC 90 9 215 4 M12 x 20 182 432 436 452 452 92 101 85 316 287 123 89 105 105 60 74.0 55 65 168 50 53.8 14 60* 64.4* 18* 5 PSH 3125 DG/B14 + IEC - IEC 71 292 230 10 265 - IEC 80 - IEC 90 - IEC 100 - IEC 112 4 M12 x 20 224 511 115 125 88 388 354 151 530 107 530 107 547 124 547 124 69 100 Motor Bağlantı Ölçüleri Motor Büyüklüğü 63 71 80 90 100 112 85 Key a2 b2 e2 f2 s2 d1 l1 t1 u1 140 160 200 200 250 250 95 110 130 130 180 180 115 130 165 165 215 215 3.5 4.0 4.0 4.0 5.0 5.0 M8 M8 M10 M10 M12 M12 11 14 19 24 28 28 23 30 40 50 60 60 12.8 16.3 21.8 27.3 31.3 31.3 4 5 6 8 8 8 A A A A A A 4x4x18 5x5x25 6x6x35 8x7x40 8x7x50 8x7x50 70 8 8* 3 202 60 64.4 18 70* 74.9* 20* 95 Kama Ölçüleri Motor Mounting Dimensions Motor Frame Size 25 28.3 30* 33.3* 89 6 250 Kaplin Tipi Type of coupling Çiftel KTR DK - 14 DK - 14 DK - 24 DK - 24 DK - 28 DK - 28 BJ - 14 BJ - 14 BJ - 24 BJ - 24 BJ - 28 BJ - 28 *Opsiyonel delik milli şaft *Optional hollow shaft www.pgr.com.tr 121 İKİ KADEME DOUBLE REDUCTION k m q m o l l1 q1 c1 l x Øe2 x Øs2 Øs j p Ød u1 c r1 h f2 T Øa2 Ød1 n Øb2 H7 ME a e1 n1 t1 t b w r u v e Tip Montaj Ölçüleri (Ayak) Ana Ölçüler Şaft Ölçüleri Mounting Dimensions (Foot) Outline Dimensions Shaft Dimensions Type r n c e c1 e1 s i d v x l u w T 25 50 28.0 8 5 4 40 M10 30 60 33.0 8 5 5 50 M10 242 100 19.0 35 70 38.0 10 5 6 60 M12 293 290 125 24.0 45 90 48.5 14 5 5 80 M16 356 354 150 39.0 60 64.0 120 18 10 8 100 M20 ME 186 75 7.5 PSH 2063 - IEC 63 100 110 17 141 138 40 45 11 112 79 17 141 40 35 65 TMA + IEC - IEC 71 85 193.5 201 80 13.0 89 105 105 130 PSH 2080 - IEC 63 130 130 21 179 160 40 60 14 21 171 40 40 TMA + IEC - IEC 71 85 89 105 105 130 130 229 88 107 107 124 124 156 109 133 133 190 194 b f n1 r1 h i3 PSH 2050 - IEC 63 80 100 15 121 122 40 35 11 100 65 15 117 30 35 54 TMA + IEC - IEC 71 - IEC 80 - IEC 90 - IEC 80 - IEC 90 - IEC 100 - IEC 80 - IEC 90 - IEC 100 - IEC 112 PSH 2100 - IEC 71 135 150 29 186 190 50 75 18 26 184 48 70 TMA + IEC - IEC 80 - IEC 90 - IEC 100 - IEC 112 - IEC 132 k m t q1 a 271 115 275 291 291 - IEC 112 - IEC 132 - IEC 160 487 544 548 o p _ _ 85 89 105 105 179 7.5 7.5 _ _ _ _ _ Motor Bağlantı Ölçüleri Motor Büyüklüğü q Kama Ölçüleri Motor Mounting Dimensions Motor Frame Size 122 j _ 286 134 _ 290 306 1.0 306 1.0 331 26.0 _ 140 95 327 160 _ 80 331 _ 347 _ 347 372 4.0 372 4.0 _ 180 120 378 195 _ 100 397 _ 397 _ 414 _ 414 _ 446 PSH 2125 - IEC 90 180 200 36 244 250 70 92 22 225 155 463 255 31 241 60 82 130 487 TMA + IEC - IEC 100 63 71 80 90 100 112 132 160 3 f a Key a2 b2 e2 f2 s2 d1 l1 140 160 200 200 250 250 300 350 95 110 130 130 180 180 230 250 115 130 165 165 215 215 265 300 3.5 4.0 4.0 4.0 5.0 5.0 5.0 6.0 M8 M8 M10 M10 M12 M12 M12 M16 11 14 19 24 28 28 38 42 23 30 40 50 60 60 80 110 t1 u1 12.8 4 16.3 5 21.8 6 27.3 8 31.3 8 31.3 8 41.3 10 45.3 12 A A A A A A A A 4x4x18 5x5x25 6x6x35 8x7x40 8x7x50 8x7x50 10x8x60 12x8x75 Kaplin Tipi Type of coupling Çiftel KTR DK - 14 DK - 14 DK - 24 DK - 24 DK - 28 DK - 28 DK - 38 DK - 42 BJ - 14 BJ - 14 BJ - 24 BJ - 24 BJ - 28 BJ - 28 BM - 38 BM - 42 www.pgr.com.tr ÜÇ KADEME TRIPLE REDUCTION k q z o m q1 m l l1 c1 l x x Øe2 Øs2 T Ød p u1 h Ød1 Øb2 H7 Øa2 ME a c r1 e1 n1 t1 Øs n j f2 r t w i f i3 u a b e v Montaj Ölçüleri (Ayak) Ana Ölçüler Şaft Ölçüleri Mounting Dimensions (Foot) Outline Dimensions Shaft Dimensions Tip Type c a n e b r s f i h d k o m p q j q1 z t v x ME l u w T PSH 3050 - IEC 63 80 100 15 121 122 40 35 11 15 117 30 35 TMA + IEC - IEC 71 100 65 329 115 85 179 186 7.5 75 17.5 54 333 89 58 37.5 25 50 28.0 8 5 40 4 M10 PSH 3063 - IEC 63 100 110 17 141 138 40 45 11 17 141 40 35 TMA + IEC - IEC 71 112 79 344 134 85 193.5 201 1.0 80 89 11.0 65 348 58 43.0 30 60 33.0 8 5 50 5 M10 PSH 3080 - IEC 63 130 130 21 179 160 40 60 14 40 40 21 171 TMA + IEC - IEC 71 140 95 385 160 85 229 242 80 389 89 _ _ 100 58 49.0 35 70 38.0 10 5 60 6 M12 PSH 3100 - IEC 63 135 150 29 186 190 50 75 18 26 184 48 70 TMA + IEC - IEC 71 180 120 435 195 85 293 290 89 100 439 105 455 105 455 _ _ _ _ 125 60 74.0 45 90 48.5 14 5 80 5 M16 PSH 3125 - IEC 71 180 200 36 244 250 70 92 22 31 241 60 82 TMA + IEC - IEC 80 225 155 511 255 88 356 354 130 530 107 530 107 547 124 547 124 _ _ _ _ _ 150 69 60 64.0 10 120 18 100 8 M20 c1 e1 i3 n1 r1 - IEC 80 - IEC 90 - IEC 90 - IEC 100 - IEC 112 Motor Bağlantı Ölçüleri Motor Büyüklüğü 63 71 80 90 100 112 www.pgr.com.tr Kama Ölçüleri Motor Mounting Dimensions Motor Frame Size 100 Key a2 b2 e2 f2 s2 d1 l1 t1 u1 140 160 200 200 250 250 95 110 130 130 180 180 115 130 165 165 215 215 3.5 4.0 4.0 4.0 5.0 5.0 M8 M8 M10 M10 M12 M12 11 14 19 24 28 28 23 30 40 50 60 60 12.8 16.3 21.8 27.3 31.3 31.3 4 5 6 8 8 8 A A A A A A 4x4x18 5x5x25 6x6x35 8x7x40 8x7x50 8x7x50 Kaplin Tipi Type of coupling Çiftel KTR DK - 14 DK - 14 DK - 24 DK - 24 DK - 28 DK - 28 BJ - 14 BJ - 14 BJ - 24 BJ - 24 BJ - 28 BJ - 28 123 İKİ KADEME DOUBLE REDUCTION Øe2 l1 Øs1 l T Øs2 t1 Øa1 Øb1 h6 p Ød u1 h ME Ød1 Øb2 H7 Øa2 Øe1 f1 f2 q1 q c1 m o i2 m1 t w u k v Tip Montaj Ölçüleri (Flanş) Ana Ölçüler Şaft Ölçüleri Mounting Dimensions (Flange) Outline Dimensions Shaft Dimensions Type d h i2 k 130 3.5 9 100 50 266 270 286 286 63 135 12 165 3.5 11 121 60 282 286 302 302 327 - IEC 63 200 130 - IEC 71 - IEC 80 - IEC 90 - IEC 100 - IEC 112 12 165 3.5 11 146 70 328 332 348 348 373 373 - IEC 71 250 180 - IEC 80 - IEC 90 - IEC 100 - IEC 112 - IEC 132 - IEC 90 350 250 - IEC 100 - IEC 112 - IEC 132 - IEC 160 16 215 4 14 182 90 20 300 5 18 224 120 b1 c1 PSH 2050 TMG/B5 + IEC - IEC 63 160 110 - IEC 71 - IEC 80 - IEC 90 10 PSH 2063 TMG/B5 + IEC - IEC 63 200 130 - IEC 71 - IEC 80 - IEC 90 - IEC 100 PSH 2080 TMG/B5 + IEC PSH 2100 TMG/B5 + IEC a1 PSH 2125 TMG/B5 + IEC e1 f1 s1 p t v l u w 25 50 28.0 8 5 M10 40 30 60 33.0 8 5 M10 50 102 19.0 35 70 38.0 10 7 M12 56 287 123 24.0 45 90 48.5 14 5 M16 80 354 151 39.0 60 64.0 120 18 10 M20 100 q q1 ME 85 188 89 105 105 181 71 7.5 70 156 85 206.5 89 105 105 130 197 76 13.0 79 184 85 254 89 105 105 130 130 243 375 96 232 394 394 411 411 443 463 119 307 487 487 544 548 88 316 107 107 124 124 156 109 388 133 133 190 194 Kama Ölçüleri Motor Mounting Dimensions Motor Frame Size 124 o m1 Motor Bağlantı Ölçüleri Motor Büyüklüğü 63 71 80 90 100 112 132 160 m Key a2 b2 e2 f2 s2 d1 l1 t1 u1 140 160 200 200 250 250 300 350 95 110 130 130 180 180 230 250 115 130 165 165 215 215 265 300 3.5 4.0 4.0 4.0 5.0 5.0 5.0 6.0 M8 M8 M10 M10 M12 M12 M12 M16 11 14 19 24 28 28 38 42 23 30 40 50 60 60 80 110 12.8 16.3 21.8 27.3 31.3 31.3 41.3 45.3 4 5 6 8 8 8 10 12 A A A A A A A A 4x4x18 5x5x25 6x6x35 8x7x40 8x7x50 8x7x50 10x8x60 12x8x75 T Kaplin Tipi Type of coupling Çiftel KTR DK - 14 DK - 14 DK - 24 DK - 24 DK - 28 DK - 28 DK - 38 DK - 42 BJ - 14 BJ - 14 BJ - 24 BJ - 24 BJ - 28 BJ - 28 BM - 38 BM - 42 www.pgr.com.tr ÜÇ KADEME TRIPLE REDUCTION l1 Øs1 l Øe2 T Øs2 t1 Øa1 Øb1 h6 p Ød u1 Øa2 Øb2 H7 h Ød1 ME Øe1 f1 q1 f2 q z c1 o m i2 m1 k w u t v Tip Montaj Ölçüleri (Flanş) Ana Ölçüler Şaft Ölçüleri Mounting Dimensions (Flange) Outline Dimensions Shaft Dimensions Type d a1 b1 c1 e1 f1 s1 h i2 k m m1 o p q z q1 ME 188 181 58 71 37.5 206.5 197 58 76 43.0 t v T l u w 25 50 28.0 8 5 M10 40 30 60 33.0 8 5 M10 50 PSH 3050 TMG/B5 + IEC PSH 3063 TMG/B5 + IEC - IEC 63 - IEC 71 160 110 10 130 3.5 9 50 324 63 135 328 85 89 - IEC 63 - IEC 71 200 130 12 165 3.5 11 121 60 340 70 156 344 85 89 PSH 3080 TMG/B5 + IEC PSH 3100 TMG/B5 + IEC - IEC 63 - IEC 71 200 130 12 165 3.5 11 146 70 386 79 184 390 85 89 254 243 58 102 49.0 35 70 38.0 10 7 M12 56 - IEC 63 - IEC 71 - IEC 80 - IEC 90 250 180 16 215 4 14 182 90 432 96 232 436 452 452 85 89 105 105 316 287 60 123 74.0 45 90 48.5 14 5 M16 80 PSH 3125 TMG/B5 + IEC - IEC 71 350 250 - IEC 80 - IEC 90 - IEC 100 - IEC 112 20 300 5 18 224 120 511 119 307 530 530 547 547 88 107 107 124 124 388 354 69 151 100 60 64.0 120 18 10 M20 100 Motor Bağlantı Ölçüleri Motor Büyüklüğü www.pgr.com.tr Kama Ölçüleri Motor Mounting Dimensions Motor Frame Size 63 71 80 90 100 112 100 Key a2 b2 e2 f2 s2 d1 l1 t1 u1 140 160 200 200 250 250 95 110 130 130 180 180 115 130 165 165 215 215 3.5 4.0 4.0 4.0 5.0 5.0 M8 M8 M10 M10 M12 M12 11 14 19 24 28 28 23 30 40 50 60 60 12.8 16.3 21.8 27.3 31.3 31.3 4 5 6 8 8 8 A A A A A A 4x4x18 5x5x25 6x6x35 8x7x40 8x7x50 8x7x50 Kaplin Tipi Type of coupling Çiftel KTR DK - 14 DK - 14 DK - 24 DK - 24 DK - 28 DK - 28 BJ - 14 BJ - 14 BJ - 24 BJ - 24 BJ - 28 BJ - 28 125 İKİ KADEME DOUBLE REDUCTION IF Øe2 l1 Øs1 m1 Øs2 c1 f1 m1 xH xH f3 f3 t1 Øa1 Øb1 h6 p ØD u1 Øb2 H7 Øa2 h ME Ød1 Øe1 Øe1 Øs1 mK f2 q1 m q uH ØdH ØD PSH 2125 Ø450 B5 IH IH Montaj Ölçüleri (Flanş) Ana ölçüler Şaft Ölçüleri Mounting Dimensions (Flange) Outline Dimensions Shaft Dimensions Type dH* a1 b1 c1 e1 200 130 12 165 PSH 2050 DG/B5 + IEC - IEC 63 - IEC 71 - IEC 80 - IEC 90 PSH 2063 DG/B5 + IEC - IEC 63 200 130 - IEC 71 - IEC 80 - IEC 90 - IEC 100 12 PSH 2080 DG/B5 + IEC - IEC 63 250 180 - IEC 71 300 230 - IEC 80 - IEC 90 - IEC 100 - IEC 112 15 20 215 265 PSH 2100 DG/B5 + IEC - IEC 71 350 250 - IEC 80 - IEC 90 - IEC 100 - IEC 112 - IEC 132 - IEC 90 400 300 - IEC 100 450 350 - IEC 112 - IEC 132 - IEC 160 20 20 22 PSH 2125 DG/B5 + IEC tH mH k Tip m o f1 h k m m1 mK IF o 85 45 89 105 105 3.5 11 100 266 60 66 270 286 286 39 3.5 11 121 282 67 74 286 302 302 327 38 4 4 14 146 328 75 84 14 332 348 348 373 373 44 85 53 89 105 105 130 130 300 5 350 400 5 5 18 182 375 92 101 48 88 57 394 107 394 107 411 124 411 124 443 156 18 224 463 115 125 50 109 60 18 487 133 487 133 544 190 548 194 165 p uH* xH D IH mH 25 30* 28.3 33.3* 8 8* 45 45 132 30 35* 33.3 38.3* 8 10* 50 50 148 254 243 102 4 19.0 40 45* 43.3 48.8* 12 14* 65 55 168 316 287 123 4 24.0 50 60* 53.8 64.4* 14 18* 85 60 70* 70 64.4 74.9* 202 18 20* 95 89 250 71 3 7.5 76 3 13.0 85 45 206.5 197 89 105 105 130 388 354 151 4 39.0 Kama Ölçüleri Motor Mounting Dimensions Motor Frame Size tH* q1 f3 ME q 188 181 Motor Bağlantı Ölçüleri Motor Büyüklüğü 63 71 80 90 100 112 132 160 s1 Key a2 b2 e2 f2 s2 d1 l1 t1 u1 140 160 200 200 250 250 300 350 95 110 130 130 180 180 230 250 115 130 165 165 215 215 265 300 3.5 4.0 4.0 4.0 5.0 5.0 5.0 6.0 M8 M8 M10 M10 M12 M12 M12 M16 11 14 19 24 28 28 38 42 23 30 40 50 60 60 80 110 12.8 16.3 21.8 27.3 31.3 31.3 41.3 45.3 4 5 6 8 8 8 10 12 A A A A A A A A 4x4x18 5x5x25 6x6x35 8x7x40 8x7x50 8x7x50 10x8x60 12x8x75 3 4 5 5 6 Kaplin Tipi Type of coupling Çiftel KTR DK - 14 DK - 14 DK - 24 DK - 24 DK - 28 DK - 28 DK - 38 DK - 42 BJ - 14 BJ - 14 BJ - 24 BJ - 24 BJ - 28 BJ - 28 BM - 38 BM - 42 *Opsiyonel delik milli şaft *Optional hollow shaft 126 www.pgr.com.tr ÜÇ KADEME TRIPLE REDUCTION IF m1 l1 Øs1 Øe2 c1 f1 m1 xH xH Øs2 t1 Øa1 ØD Øb1 h6 u1 p Ød1 h Øb2 H7 Øa2 ME Øe1 mK q1 f2 q z f3 Øe1 f3 m Øs1 o m k tH uH ØdH ØD mH IH IH PSH 3125 Ø450 B5 Tip Montaj Ölçüleri (Flanş) Ana Ölçüler Şaft Ölçüleri Mounting Dimensions (Flange) Outline Dimensions Shaft Dimensions Type a1 b1 c1 e1 s1 f1 h k m m1 mK o IF q p dH* tH* uH* xH D IH mH q1 f3 ME z PSH 3050 DG/B5 + IEC PSH 3063 DG/B5 + IEC - IEC 63 - IEC 71 200 130 12 165 3.5 11 100 324 60 66 328 39 85 45 188 181 58 71 3 37.5 89 25 28.3 30* 33.3* 8 8* - IEC 63 - IEC 71 200 130 12 165 3.5 11 121 340 67 74 344 38 85 45 206.5 197 58 76 3 43.0 89 45 45 30 33.3 35* 38.3* 132 8 10* 50 148 PSH 3080 DG/B5 + IEC PSH 3100 DG/B5 + IEC - IEC 63 - IEC 71 250 180 300 230 15 215 20 265 4 4 14 146 386 75 84 14 390 44 85 53 254 243 58 102 4 49.0 89 40 43.3 45* 48.8* 12 14* 65 168 - IEC 63 - IEC 71 - IEC 80 - IEC 90 350 250 20 300 5 18 182 432 92 101 48 85 57 316 287 60 123 4 74.0 436 89 452 105 452 105 50 53.8 60* 64.4* 14 18* 85 202 - IEC 71 400 300 - IEC 80 450 350 - IEC 90 - IEC 100 - IEC 112 20 350 22 400 5 5 18 224 511 115 125 50 88 60 388 354 69 151 4 100 530 107 18 530 107 547 124 547 124 60 64.4 70* 74.9* 18 20* 95 250 PSH 3125 DG/B5 + IEC Motor Bağlantı Ölçüleri Motor Büyüklüğü Motor Mounting Dimensions Motor Frame Size 63 71 80 90 100 112 Kama Ölçüleri Key a2 b2 e2 f2 s2 d1 l1 t1 u1 140 160 200 200 250 250 95 110 130 130 180 180 115 130 165 165 215 215 3.5 4.0 4.0 4.0 5.0 5.0 M8 M8 M10 M10 M12 M12 11 14 19 24 28 28 23 30 40 50 60 60 12.8 16.3 21.8 27.3 31.3 31.3 4 5 6 8 8 8 A A A A A A 4x4x18 5x5x25 6x6x35 8x7x40 8x7x50 8x7x50 50 55 70 89 3 4 5 5 6 Kaplin Tipi Type of coupling Çiftel KTR DK - 14 DK - 14 DK - 24 DK - 24 DK - 28 DK - 28 BJ - 14 BJ - 14 BJ - 24 BJ - 24 BJ - 28 BJ - 28 *Opsiyonel delik milli şaft *Optional hollow shaft www.pgr.com.tr 127 W VE IEC ADAPTÖRLERİN AĞIRLIK TABLOSU WEIGHTS TABLE OF W AND IEC ADAPTERS Ağırlıklar ( Yaklaşık kg ) / Weights (Approx. kg) TİP TYPE 128 IEC W 63 71 80 90 13 13 23 23 27 27 34 44 44 100 112 PSH 2040 9 10 11 PSH 3050 23 24 25 PSH 2050 18 19 20 PSH 3063 27 28 29 PSH 2063 22 23 24 PSH 3080 37 38 39 PSH 2080 32 33 34 37 37 PSH 3100 65 66 67 70 70 PSH 2100 63 - 61 65 65 69 69 PSH 3125 119 - 117 121 121 125 125 PSH 2125 112 - - - 107 114 114 132 160 78 128 138 www.pgr.com.tr SERVOMOTOR ADAPTÖRÜ SERVOMOTOR ADAPTERS SERVOMOTOR MONTAJI İÇİN ADAPTÖR ADAPTER FOR MOUNTING SERVOMOTOR SEP TİPİ TYPE SEP I Ød a Øb2 2 a2 Øe x Øs2 f2 o Motor Büyüklüğü / Motor Size Redüktör Tipi Gear Unit Type a a2 b2 e2 f2 s2 x PSH 2050 PSH 2063 PSH 2080 120 96 80 100 4 M6 15 19 40 124 10 Servo 100 / 160 S PSH 2050 PSH 2063 PSH 2080 165 126 110 130 4 M8 20 24 50 136 35 Servo 130 / 160 S PSH 2100 155 126 110 130 4 M8 20 24 50 150 35 Servo 130 / 250 S PSH 2050 PSH 2063 PSH 2080 186 155 130 165 5 M10 23 32 58 151 95 Servo 165 / 160 S PSH 2100 186 155 130 165 5 M10 23 32 58 166 95 Servo 165 / 250 S PSH 2100 240 192 180 215 5 M12 45 38 80 187 95 Servo 215/ 250 S PSH 2125 240 192 180 215 5 M12 24 38 80 229 310 Servo 215/ 300 S PSH 2125 350 260 250 300 5 M16 26 48 82 231 310 Servo 300/ 300 S SEP tipi servo motor bağlantı adaptörünün bağlantısı kamalı olarak yapılmaktadır. SEK tiplerinde ise servo motor adaptörünün bağlantısı setuskur civata sıktırması ile yapılmaktadır. Servo motor bağlantı adaptörünün bağlantı flanşının farklı olması durumunda yüksek adetteki siparişler üretime alınır. www.pgr.com.tr Şaft Ebatı Silindir M knom Adaptör Tipi Shaft Size Cylinder [Nm] Adapter Type o d I For connecting SEP adapter which is shown above on this page, servo motor’s output shaft is designed with locking key. For connecting SEK type adapter, connecting is supplied with a clamp coupling sleeve. An intermediate flange is required when other servo motor types are used with IEC adapter. Offers are manufactured gladly by PGR. 129 TORK KOLU TORQUE ARM PSH 2040 DG/TK ... PSH 2125 DG/TK PSH 3050 DG/TK ... PSH 3125 DG/TK 90° L 135° 45° R f1 m1 c m1 xH h1 Ød a Ød1 180° 225° h a 270° k øs Ød1 b j6 øe NOT : PSH 2040 için sadece 90° - 180° - 270° NOTE : Only 90° - 180° - 270° for PSH 2040 Tip Montaj Ölçüleri Type Mounting Dimensions a b j6 c d d1 f1 h h1 k s e m1 xH PSH 2040 DG/TK 110 60 10 35 10,5 - 32 8 36 6,6 75 60 3 PSH 2050 DG/TK PSH 3050 DG/TK 130 130 95 95 14 14 40 40 10,5 10,5 3 3 32 32 10 10 36 36 9 9 115 115 66 66 3 3 PSH 2063 DG/TK PSH 3063 DG/TK 160 160 95 95 14 14 40 40 10,5 10,5 3 3 32 32 11,5 11,5 36 36 9 9 115 115 74 74 4 4 PSH 2080 DG/TK PSH 3080 DG/TK 200 200 130 130 13,5 13,5 40 40 10,5 10,5 4 4 32 32 9 9 36 36 11 11 165 165 84 84 5 5 PSH 2100 DG/TK PSH 3100 DG/TK 250 250 180 180 16 16 60 60 16,5 16,5 4 4 56 56 20,5 20,5 60 60 14 14 215 215 101 101 5 5 PSH 2125 DG/TK PSH 3125 DG/TK 310 310 230 230 18 18 60 60 16,5 16,5 4 4 56 56 29,5 29,5 60 60 14 14 265 265 125 125 6 6 Sipariş verirken tork kolunun pozisyonunu belirtiniz.(Örn. 180°) Tork kolu L yada R tarafına bağlanabilir. 130 Ana Ölçüler Outline Dimensions Determine position of torque arm when commission.( e.g. 180°) Determine mounted and connecting position for instance side L or side R of gear unit when you commission. www.pgr.com.tr Y Y MERKEZLEME PİMİ GUIDE PINS Øs1 H11 t Øs1 X Øs1 PSH 2050 DG ... PSH 3100 DG TİP / TYPE www.pgr.com.tr X PSH 2125 DG ... PSH 3125 DG H11 s1 x t X Y PSH 2050 DG PSH 3050 DG 2 X Ø 8 X 12 56.14 12.45 PSH 2063 DG PSH 3063 DG 2 X Ø 8 X 12 56.14 12.45 PSH 2080 DG PSH 3080 DG 2 X Ø 10 X 15 80.54 17.86 PSH 2100 DG PSH 3100 DG 2 X Ø 12 X 20 104.95 23.27 PSH 2125 DG PSH 3125 DG 4 X Ø 12 X 20 111.75 71.19 131 KONİK SIKTIRMA SHRINK DISC S = h6 veya f6 ile konik sıktırmanın güvenirliliği. S = Assurance of shrink disc (with h6 and f6 tolerance) M A = Civatayı sıkmak için gerekli olan tork M = Screw torque for tightening A Z s = Vida miktarı Z s = Amount of screw M amax = max. izin verilebilir çıkış momenti M amax = maximum allowable output moment Konik sıktırma, genellikle kullanıcı milinin karşı tarafına montaj edilmelidir. Şaft çapı ISO h6 veya f6’ya göre imal edilmelidir. (f6= Kolay montaj) When customer shaft is installed to the gear unit, shrink disc should be mounted on opposite side of it. Customer diameter shaft should be machined according to ISO h6 or f6 tolerances. (f6= For easy assembling) Hexagonal Screw Altıköşe Başlı Civata DIN 931 / DIN 933* 10.9Vz Konik Sıktırma Shrink Disc Redüktör Tipi Gearbox Type 132 Tip Type Mamax [Nm] sh6 sf6 dxl Zs MA [Nm] PSH 2050 KS-KK KS 25 / 35 182 2.8 2.3 M5 X 25 8 7 PSH 2050 KS-KK KS 30 / 40 182 5.4 4.7 M6 X 35* 8 12 PSH 2063 KS-KK KS 30 / 40 383 2.6 2.2 M6 X 35* 8 12 PSH 2063 KS-KK KS 35 / 46 383 3.0 3.2 M6 X 35* 10 12 PSH 2080 KS-KK KS 40 / 55 779 3.0 2.6 M8 X 40 8 30 PSH 2080 KS-KK KS 45 / 55 779 4.1 3.8 M8 X 40 8 30 PSH 2100 KS-KK KS 50 / 62 1604 2.7 2.6 M8 X 40 10 30 PSH 2100 KS-KK KS 60 / 76 1604 5.1 4.7 M10 X 50 10 59 PSH 2125 KS-KK KS 60 / 76 3120 2.6 2.4 M10 X 50 10 59 PSH 2125 KS-KK KS 70 / 90 3120 4.4 4.1 M12 X 70* 10 100 www.pgr.com.tr KORUMA KAPAĞI COVER hHB mHB www.pgr.com.tr TİP / TYPE hHB mHB PSH 2050 DG/KK PSH 3050 DG/KK 38 98 PSH 2063 DG/KK PSH 3063 DG/KK 38 105 PSH 2080 DG/KK PSH 3080 DG/KK 42 117 PSH 2100 DG/KK PSH 3100 DG/KK 50 142 PSH 2125 DG/KK PSH 3125 DG/KK 54 169 133 ØD IP 66 UYGULAMASI PROTECTION IP 66 L 134 TİP / TYPE ØD L PSH 2050 PSH 3050 81 25 PSH 2063 PSH 3063 86 28 PSH 2080 PSH 3080 105 35 PSH 2100 PSH 3100 136 40 PSH 2125 PSH 3125 151 40 www.pgr.com.tr MEKANİK KEÇE MECHANICAL SEAL MEKANİK KEÇE MECHANICAL SEAL Özellikle aşırı çalışmalarda ve çok kötü çalışma koşulla- Seals are important for prevent oil leakage from gear unit and protect from environment. In hazardous environment and extreme operation conditions sealing must be considered. For th at reason mechanical seals are applicable for using at hazardous environment, submerged operation. rında uygundur. Daldırmalı veya sulu çalışma ortamlarından etkilenmemektedir. Bu keçe tipi dış çevre koşullarından kesin koruma sağlar. www.pgr.com.tr 135 ÇEKTİRME FIXING AND FORCING ELEMENTS Çektirme elemanları Çektirme elemanlar, şaft montajlı dişli ünitelerinde opsiyonel olarak bulunur. Kullanım Şartları: -Kullanılacak milin merkezinde DIN 332/2 standardında bir delik açılmalı. -Mil, faturalı yada faturasız olsa da,çektirme elemanları ile sabitlenebilir. -I ‘deki montaj kullanıldığında,mil,şaftın içinde bulunan segman ile tutturulur.( Parça A ) -II ‘deki montaj kullanıldığında,milin üzerinde bulununan bilezik (manşon) kullanılarak doğrudan delik mil üzerine tutturulur.( Parça B ) A I II B Fixing elements This is used for shaft mounted designs and it should be specified when ordering because there are some requirements for use. Using conditions: -Centre bore must be machined appropriately DIN 332/2. -Solid shaft could be mounted either with a shaft shoulder (II) or without shaft shoulder (I) -Solid shaft which is without shaft shoulder is mounted with using retainin ring (A) -Solid shaft which is with shaft shoulder is mounted with using spacer 6 7 3 1 4 8 5 2 9 ØD Ød2 Ød II Ød3 1 9 I s3 L s DEMONTAJ DISASSEMBLY a L I L= max. kullanıcı şaft boyu L= maximum length of the solid shaft MONTAJ ASSEMBLY 1) Kullanıcı mili 2) Rondela DIN 127 3) * İç Segman DIN 472 4) * Çektirme civatası 5) Alyan başlı civata DIN 912 6) * Yaylı rondela 7) * Somun 8) Delik mil 9) Disk 1) Customer’s shaft 2) Washer DIN 127 3) * Circlip DIN 472 4) * Jacking screw 5) Socket head screw DIN 912 6) * Thrust washer 7) * Jacking nut 8) Hollow shaft 9) Disc *Dikkat, yıldızlı ürünler PGR tarafından temin edilmez. *Star signs are shown this item are not provided by PGR DEMONTAJ: 1) Alyanbaşlı civatayı sökünüz. (poz.5) 2) Diski çıkarınız. (poz.9) 3) Yaylı rondelayı takınız. (poz.6) 4) Somunu yerleştiriniz. (poz.7) 5) Segmanı takınız. (poz.3) 6) Çektirme civatasını basarak çevirerek kullanıcı milini şafttan ayırınız. (poz.4) DISASSEMBLING: 1) Loosen the socket head screw (5) 2) Remove disc (9) 3) Immerse thrust washer (6) 4) Tuck jacking nut (7) 5) Mount circlip (3) 6) Remove solid shaft from hollow shaft with using jacking screw (4) REQUIREMENTS: Solid shaft which is connected to the hollow shaft, must have machined with a centre bore according to DIN 332/2. Consider that ‘Lmax ’ length is important for jacking not using solid shaft’s length must not greater than ‘L max ’. KOŞULLAR: Kullanıcı mili DIN 332/2' e göre merkezine diş açılmış delik gerekmektedir. Müşteri mili "L" uzunluğunu geçmemelidir aksi halde çektirme elementi uygulanamaz. (poz. 5,6,7) MONTAJ: 1) Kullanıcı milini şaftın içerisine yerleştiriniz. (poz.8) 2) Diski (poz.9) şaftın içerisine yerleştiriniz. 3) Disk ile alyan başlı civata ve rondelayı sabitleyiniz. (poz.2-5) Yukarıdaki bütün ölçüler Sonsuz-helisel - Tip W, Tip IEC ve Sonsuz - helisel dişli motorları için geçerlidir. 136 ASSEMBLING: 1) Immerse customer shaft to the hollow shaft (8) 2) Mount disc to the hollow shaft (9) 3) Fasten disc and washer (2) by tightening socket head screw (5) Dimensions which are shown above of this page are used for all type of helical - worm gear units. ( Type W, IEC adapter and helical - worm geared motor. ) www.pgr.com.tr ÇEKTİRME ÖLÇÜ TABLOSU DIMENSION TABLE OF FIXING ELEMENT PSH 2040 DG/Ç ... PSH 2125 DG/Ç Tip / Type PSH 2040 DG/Ç PSH 2050 DG/Ç PSH 2063 DG/Ç PSH 2080 DG/Ç PSH 2100 DG/Ç PSH 2125 DG/Ç www.pgr.com.tr 1 L 2 100 A6 l 20 x 1.5 M10 110 A10 l 25 x 1.2 110 A10 l 30 x 1.2 125 A10 120 A12 135 A16 135 A16 165 155 3 4 5 6 7 8 d x mH a D 9 d2 s d3 s3 M6 X 30 19.9 3 19.9 10 M10 20 X 120 15 30 M12 M10 X 45 24.9 3 24.9 12 M12 25 X 132 20 38 M12 M10 X 45 29.9 3 29.9 12 M12 30 X 132 20 40 l 35 x 1.5 M12 M10 X 45 29.9 3 12 12 M12 30 X 148 20 40 l 40 x 1.75 M16 M12 X 55 34.9 3 16 16 M16 35 X 148 24.5 45 l 40 x 1.75 M16 M16 X 70 39.9 4 39.9 16 M16 40 X 168 25 55 l 45 x 2.0 M16 M16 X 70 44.9 4 44.9 16 M16 45 X 168 26 60 A16 l 50 x 2.0 M20 M16 X 70 49.9 4 49.9 20 M20 50 X 202 26 65 A20 l 60 x 2.0 M24 M20 X 70 59.9 5 59.9 24 M24 60 X 202 30 75 205 A20 l 60 x 2.0 M24 M20 X 90 59.9 5 59.9 24 M24 60 X 250 30 75 205 A20 l 70 x 2.5 M24 M20 X 90 69.9 5 69.9 24 M24 70 X 250 30 95 137 GENEL PARÇA LİSTESİ GENERAL PART LIST OF PSH PSH 2040 - PSH 2125 DG Gövdeden Montajlı / Case Mounted 12 16 4 14 15 11 19 13 15 18 26 25 27 28 2 14 28 1 27 25 24 3 23 20 Sonsuz Çark Vida Z2 Dişlisi Z1 Dişlisi Çıkış Şaftı Şaft Keçesi Segman Layner Bilyalı Rulman Conta Gövde Kapağı Yağ Tapası Havalandırma Tapası Rondela Alyan Başlı Civata Kama Yağ Kapağı Gövde Conta Rondela Segman Kama Segman Layner Rondela Rulman Burç Alyan Başlı Civata Rondela Disk Şaft Keçesi Worm whell Worm gear Driving gear Driving pinion Hollow Shaft Shaft Seal Circlip Shim Ball Bearing Gasket Gearcase Cover Drain plug Vent plug Washer Socket Head Screw Key Locking Cap Gear Case Gasket Supporting Disc Circlip Key Circlip Shim Supporting Disc Angular ball bearing Spacer Socket Head Screw Washer Disc Shaft Seal 29 8 10 9 8 17 22 1 2 3 4 5 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 23 24 25 26 27 28 29 30 31 32 33 9 30 5 31 7 32 33 7 33 10 13 15 138 www.pgr.com.tr GENEL PARÇA LİSTESİ GENERAL PART LIST OF PSH PSH 2040 - PSH 2125 Ayak Montajlı / Foot Mounted 16 12 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 20 4 14 15 11 19 13 15 18 26 25 27 28 2 1 8 28 27 25 3 24 22 Sonsuz Çark Vida Z2 Dişlisi Z1 Dişlisi Çıkış Mili Kama Şaft Keçesi Segman Layner Bilyalı Rulman Conta Gövde Kapağı Yağ Tapası Havalandırma Tapası Rondela Alyan Başlı Civata Kama Yağ Kapağı Gövde Conta Yağ Kapağı Rondela Segman Kama Segman Layner Rondela Rulman Worm whell Worm gear Driving gear Driving pinion Output Shaft Key Shaft Seal Circlip Shim Ball Bearing Gasket Gearcase Cover Drain plug Vent plug Washer Socket Head Screw Key Locking Cap Gear Case Gasket Locking Cap Supporting Disc Circlip Key Circlip Shim Supporting Disc Angular Ball Bearing 23 14 5 6 9 17 10 21 13 7 8 9 15 10 www.pgr.com.tr 139 GENEL PARÇA LİSTESİ GENERAL PART LIST OF PSH PSH 2040 - PSH 2125 Flanş Montajlı / Flange Mounted 12 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 4 14 15 11 19 13 15 18 26 25 27 28 2 14 28 27 25 24 3 22 23 Sonsuz Çark Vida Z2 Dişlisi Z1 Dişlisi Çıkış Mili Kama Şaft Keçesi Segman Layner Bilyalı Rulman Conta Gövde Kapağı Yağ Tapası Havalandırma Tapası Rondela Alyan Başlı Civata Kama Yağ Kapağı Gövde Conta Yağ Kapağı Rondela Segman Kama Segman Layner Rondela Rulman Worm whell Worm gear Driving gear Driving pinion Output Shaft Key Shaft Seal Circlip Shim Ball Bearing Gasket Gearcase Cover Drain plug Vent plug Washer Socket Head Screw Key Locking Cap Gear Case Gasket Locking Cap Supporting Disc Circlip Key Circlip Shim Supporting Disc Angular ball bearing 20 1 5 6 8 9 17 10 21 7 13 15 8 9 10 140 www.pgr.com.tr GENEL PARÇA LİSTESİ GENERAL PART LIST OF PSH PSH 2040 - PSH 2125 PSH 3050 - PSH 3125 Delik Milli - Tork Kollu (DG/TK) Hollow shaft - Torque arm 55 53 54 5 6 5 6 7 53 54 55 56 57 Çift çıkış mili Kama Çıkış mili keçesi Tork kolu Alyan başlı civata Vibrasyon sönümleyeci Flanş Konik sıktırma Output shaft, two sides Key Shaft seal Torque arm Socket head screw Vibration dampening connector Flange Shrink disc connector 7 Çift Çıkış Mili Konik Sıktırma B5 Flanşı 57 www.pgr.com.tr 54 56 141 GENEL PARÇA LİSTESİ GENERAL PART LIST OF PSH PSH 3050 - PSH 3125 Ayak Montajlı / Foot Mounted Gövdeden Montajlı / Case Mounted 10 6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 142 11 12 7 16 8 13 3 14 2 1 18 17 5 9 15 4 20 19 21 Z2 Dişlisi Input Gear Z1 Dişlisi Input Pinion Civata Bolt Conta Gasket Supporting disc Rondela Third Reduction gearcase İndirgeyici Gövdesi Ball bearing Rulman Key Kama Ball bearing Rulman Circlip Segman Key Kama Segman Circlip Intermediate shaft, plain İndirgeyici Mili Çakma İndirgeyici Mili Yekpare Intermediate shaft, Gearcut Circlip Segman Circlip Segman Shim Layner Circlip Segman Circlip Segman Tapa Plug Rondela Washer www.pgr.com.tr GENEL PARÇA LİSTESİ GENERAL PART LIST OF PKD IEC 63 - 112 1 3 2 4 22 5 67 9 20 19 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 17 18 19 20 21 22 23 10 11 23 18 13 14 Segman Kama Şaft keçesi Rondela Altıköşe başlı civata Segman Rulman Burç Segman Rulman Segman Kama Kama Kaplin Setuskur civata Iec mili çakma Iec mili yekpare Rondela Yağ tapası Iec gövdesi Layner Circlip Key Shaft seal Washer Hexagon screw Circlip Clutch shaft bearing Spacer Circlip Clutch shaft bearing Circlip Key Key Coupling Set screw Clutch shaft Clutch pinion shaft Washer Oil plug IEC adapter Shim 17 IEC 132 - 160 1 2 3 4 22 www.pgr.com.tr 5 21 7 9 20 10 11 19 18 23 13 14 9 17 8 143 GENEL PARÇA LİSTESİ GENERAL PART LIST OF PKD PSH 2040 - PSH 2125 PSH 3050 - PSH 3125 1 2 3 6 16 21 144 4 5 20 19 7 18 9 17 1 2 3 4 5 6 7 9 12 13 16 17 18 19 20 21 13 Segman Kama Şaft keçesi Rondela Altıköşe başlı civata Segman Rulman Rulman Kama Yağ tutucu Layner W mili çakma W mili yekpare Yağ tapası Rondela W gövdesi Circlip Key Shaft seal Washer Hexagon screw Circlip Input shaft bearing Input shaft bearing Key Oil flinger Shim Input shaft, plain Input shaft, gearcut Drain plug Washer Input bearing housing 12 www.pgr.com.tr www.pgr.com.tr 145 146 www.pgr.com.tr www.pgr.com.tr 147 148 www.pgr.com.tr www.pgr.com.tr 149 150 www.pgr.com.tr www.pgr.com.tr 151 X x 152 www.pgr.com.tr www.pgr.com.tr 153 154 www.pgr.com.tr x www.pgr.com.tr 155 X X X X X X X X X X X X X X X X X X X X X X X X X X X 156 www.pgr.com.tr X x x x x x x x x x x x X X X X X X X X X www.pgr.com.tr 157 158 www.pgr.com.tr www.pgr.com.tr 159 X 160 www.pgr.com.tr X www.pgr.com.tr 161 162 www.pgr.com.tr www.pgr.com.tr 163 BİR FAZLI - QM TİP 164 www.pgr.com.tr o www.pgr.com.tr 165 X 166 www.pgr.com.tr www.pgr.com.tr 167 168 www.pgr.com.tr www.pgr.com.tr 169 170 www.pgr.com.tr 32 a 32 b 32 a 32 b B14 flanşı (32 b) 24 a 24 b FREN PARÇA LİSTESİ VE ÖZELLİKLERİ 1 Elektro mıknatıs øH 7 M 3 Tork yayı 1 øG N 2 Endüvi plakası 9 4 Disk O 6 P 5 Kamalı burç øD 3 4 7 Ayar halkası øF øE øC øB øA 8 8 Ayar somunu 9 Bağlantı cıvataları Tip Fren Modeli K2 K3 K4 K5 K6 K7 K7/D 12 16 20 40 60 90 180 (Nm) 5 Motorun Max. Hızı (rpm) 3000 Giriş Gücü 5 K1 Statik Fren Momenti Max. Ses 2 L 6 O-ring 3000 3000 3000 3000 3000 K8 K8/D K9 200 400 300 K9/D K9/T 600 900 3000 3000 1500 1500 1500 1500 1500 (W) 15 20 25 30 45 50 55 55 60 60 65 65 65 (≤dB-A) 68 69 68 69 70 70 70 70 70 69 69 69 70 (Kg.) 1,1 1,85 2,55 2,84 4,8 7 12 15 14,3 18 23 28 34 A 84 104 114 124 148 159 189 189 218 218 248 248 248 B 72 90 103 112 132 145 170 170 196 196 230 230 230 C 61 77 88 98 119 128 151 151 176 176 204 204 204 D 3XM4 3xM5 3xM5 3xM6 3xM6 3xM8 3xM8 3xM8 6xM10 6xM10 6xM10 6xM10 9xM10 E 35 44 62 69 79 80 90 90 F 10-11 12 G 20 26 26 42 60 60 60 60 60 60 60 60 60 H 50 61 61 79 104 104 104 104 104 104 104 104 104 I 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 L 18 20 20 20 25 30 30 60 40 60 40 60 80 M (max) 9 9 9 9,5 18 16 14 14 18 18 18 18 18 N 4 4 4 5,5 8 8 8 8 8 8 8 8 8 O 0,2 0,2 0,2 0,2 0,3 0,3 0,3 0,3 0,3 0,4 0,4 0,4 0,4÷0,5 P 38,5 41,5 47 46,5 64 69,5 79 101,5 78 98 80 105 130 Ağırlık Delik toleransı K3’e kadar H7, diğerleri +0,01/-0,01 11-14 11-15 15 14-25 103 103 132 132 132 24-25 25-30 25-30 25 H40 34 H60 44-45 44-45 44-45 24-34 28 34 34 34 H60 48 48 48 48-50 Not • Fren alıştırılmadan önce statik fren momenti tabloda verilen değerlere göre ± % 20 değişiklik gösterebilir. www.pgr.com.tr 171 www.pgr.com.tr 173 174 www.pgr.com.tr www.pgr.com.tr 175 176 www.pgr.com.tr www.pgr.com.tr 177 178 www.pgr.com.tr www.pgr.com.tr 179 X x 180 www.pgr.com.tr www.pgr.com.tr 181 182 www.pgr.com.tr x www.pgr.com.tr 183 THREE PHASE - QSX TYPES min -1 X X X X X X X X X X X X X X X X X X X X X X X X X X 184 www.pgr.com.tr THREE PHASE - QSX TYPES min -1 x x x x x x x x x x x X X X X X X X X X www.pgr.com.tr 185 THREE PHASE - QS TYPES 186 www.pgr.com.tr THREE PHASE TYPES min -1 www.pgr.com.tr 187 THREE PHASE TYPES X 188 www.pgr.com.tr THREE PHASE TYPES X www.pgr.com.tr 189 THREE PHASE TYPES 190 www.pgr.com.tr SINGLE PHASE - QM TYPE www.pgr.com.tr 191 SINGLE PHASE - QM TYPE 192 www.pgr.com.tr SINGLE PHASE - QM TYPE o www.pgr.com.tr 193 BRAKE MOTOR - QB TYPE X 194 www.pgr.com.tr BRAKE MOTOR - QB TYPE min -1 www.pgr.com.tr 195 196 www.pgr.com.tr www.pgr.com.tr 197 198 www.pgr.com.tr 32 a B5 Flange 32 b B14 flange (B3 Flange) 24 a Drive Shaft (plain) 24 b Drive Shaft (gearcut) 32 a 32 b 32 a 32 b B14 flange (32 b) 24 a 24 b BRAKE PART LIST AND PROPERTIES 1 Electromagnet øH 7 M 3 Torque springs 1 øG N 2 Armature plate 9 4 Disc O 6 P 5 Splined hub øD 3 4 7 Adjuster ring øF øE øC øB øA 8 8 Adjuster nuts 9 Fixing screws Tipo Brake Model K2 K3 K4 K5 K6 K7 K7/D 12 16 20 40 60 90 180 (Nm) 5 Max Speed of the motor (rpm) 3000 Input Power 5 K1 Static Braking Torque Max noisiness 2 L 6 O-ring 3000 3000 3000 3000 3000 K8 K8/D K9 200 400 300 K9/D K9/T 600 900 3000 3000 1500 1500 1500 1500 1500 (W) 15 20 25 30 45 50 55 55 60 60 65 65 65 (≤dB-A) 68 69 68 69 70 70 70 70 70 69 69 69 70 (Kg.) 1,1 1,85 2,55 2,84 4,8 7 12 15 14,3 18 23 28 34 A 84 104 114 124 148 159 189 189 218 218 248 248 248 B 72 90 103 112 132 145 170 170 196 196 230 230 230 C 61 77 88 98 119 128 151 151 176 176 204 204 204 D 3XM4 3xM5 3xM5 3xM6 3xM6 3xM8 3xM8 3xM8 6xM10 6xM10 6xM10 6xM10 9xM10 E 35 44 62 69 79 80 90 90 F 10-11 12 G 20 26 26 42 60 60 60 60 60 60 60 60 60 H 50 61 61 79 104 104 104 104 104 104 104 104 104 I 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 L 18 20 20 20 25 30 30 60 40 60 40 60 80 M (max) 9 9 9 9,5 18 16 14 14 18 18 18 18 18 N 4 4 4 5,5 8 8 8 8 8 8 8 8 8 O 0,2 0,2 0,2 0,2 0,3 0,3 0,3 0,3 0,3 0,4 0,4 0,4 0,4÷0,5 P 38,5 41,5 47 46,5 64 69,5 79 101,5 78 98 80 105 130 Weight Tollerance hole till size K3 H7, others +0,01/-0,01 11-14 11-15 15 14-25 103 103 132 132 132 24-25 25-30 25-30 25 H40 34 H60 44-45 44-45 44-45 24-34 28 34 34 34 H60 48 48 48 48-50 Note • The brake before running in, the static braking torque value could change by +20% from the reported value. www.pgr.com.tr 199 TPS GEAR SRL Via Emilia 9/14 35043 Monselice (PD) Italy T. +39 0429 773883 F. +39 0429 772028 info@tpsgear.it www.tpsgear.it