docPolipol™ 3401-TAB - Plasto Fiberglass
download 
Şikayet Benzer belgeler
Polipol™ 354
temperatures between 5°C and 20°C. Shelf life is reduced at higher
temperatures. The shelf life of styrene containing unsaturated
polyesters will be significantly reduced when exposed to light. Sto...
Polipol™ 305 - Plasto Fiberglass
temperatures between 5°C and 20°C. Shelf life is reduced at higher
temperatures. The shelf life of styrene containing unsaturated
polyesters will be significantly reduced when exposed to light. Sto...
Polipol™ 391
temperatures between 5°C and 20°C. Shelf life is reduced at higher
temperatures. The shelf life of styrene containing unsaturated
polyesters will be significantly reduced when exposed to light. Sto...
Polipol™ 320-TA - Omnis Kompozit
No logo, graphic, data, colour code or image from this document may be copied or used unless
having the written permission given by Poliya. Poliya and the names of Poliya products
referenced herein...
Polives 702
temperatures between 5°C and 20°C. Shelf life is reduced at higher
temperatures. The shelf life of styrene containing unsaturated
polyesters will be significantly reduced when exposed to light. Sto...
Polives™ 701
Continuous Laminating
Döküm
Casting
RTM
Resin Transfer Moulding
Soğuk Pres
Cold Pres
Sıcak Pres (SMC-BMC)
Hot Press (Sheet-Bulk Moulding Compound)
Pultrüzyon (Profil)
Pultrusion (Profile)
Polijel™ 211 - Omnis Kompozit
temperatures between 5°C and 20°C. Shelf life is reduced at higher
temperatures. The shelf life of styrene containing unsaturated
polyesters will be significantly reduced when exposed to light. Sto...
Polijel™ 210 TOPCOAT 933 WHITE
temperatures between 5°C and 20°C. Shelf life is reduced at higher
temperatures. The shelf life of styrene containing unsaturated
polyesters will be significantly reduced when exposed to light. Sto...
Fleksotix - Omnis Kompozit
significant reduction in gel-time. So; for applications
where shorter gel-times are needed, an addition of 0,1%
Cobalt solution (6% concentration) is advised, which will
give about 10 minutes reduc...
poliya selection guide V11.cdr
El Yatırması
Hand lay-up
Elyaf Püskürtme
Spray-up
Fitil Sarma
Filament Winding
Sürekli Çekme
Continuous Laminating
Döküm
Casting
RTM
Resin Transfer Moulding
Soğuk Pres
Cold Pres
Sıcak Pres (SMC-BMC...
Polipol 3401-TAB contains a blue colored Mek-p indicator, its color
disappears after a couple of minutes when it’s mixed with Mek-p. As
known the addition of Mek-p to resin is done automatically at...
