Untitled
Transkript
Untitled
POR ENG The MULTI-PLUS fabric dyeing machine is suitable for dyeing woven and knitted fabrics. New advantages in processing technology, reduced flotte, narrow chamber size and lower energy consumption. A characteristic of the MULTI-PLUS is reduced width of vessel permitting the use low liquor ratios.Starting at approx. 1:3 for synthetics and 1:5 for cotton fabrics. The machine is avaible in congfigurations of 1 to 10chambers without plaiter. The MULTI-PLUS is avaible in three chamber sizes, with nominal capacities of 150, 200 and 250 kg. Equipped with a reserved tank, chemical tank, dye tank and dosing system. New Dosing System devolep by İDES shortening of dosing time with minimum 40 minutes in one charging in one machine. TUR MULTI-PLUS kumaş boya makinası örgü ve dokuma kumaşların boyanması için uygundur. Düşük flotte değeri, dar hazne boyutu ve düşük enerji ihtiyacı ile proses teknolojisinde yeni avantajlar sağlar. Karakteristik bir MULTI-PLUS ın düşürülmüş tank eni, düşük sıvı kullanım oranı ile çalışmaya izin verir. Başlangıç sentetik kumaşlar için 1:3 ve pamuk kumaşlar için ise 1:5 dir. Makinanın plaitersız olarak 1 den 10 göze kadar kongfiguransları mevcuttur. MULTI-PLUS nominal kapasite olarak 150 - 200 ve 250kg kapasitede 3 hazne boyutuna ayrılmıştır. Rezerve tankı, kimyasal tankı, boya tankı ve dozajlama sistemi ile ekipmanlandırılmıştır. İDES in geliştirmiş olduğu yeni dozajlama sistemi ile dozaj süresinin bir makine için tek şarjda min. 40 dakika kısaltılması sağlanır. 02 www.idesmakina.com.tr Maquinaria para teñido de tela MULTI-PLUS es compatible con para el teñido de tejidos de punto y tejidos. Con su valor disminuido de flotador, tamaño de contenedor apretado y bajo consumo de energía proporciona nuevas ventajas en la tecnología de procesos. Con una anchura disminuida de tanque de un MULTI-PLUS característico, permite trabajar con un nivel de líquido bajo. Para las telas sintéticas este nivel es 1:3 y para las de algodón 1:5. Existen configuraciones del 1 al 10 de la máquina sin plegador. MULTI-PLUS está dividida en 3 tamaños de contenedor con 150, 200 y 250 kg de capacidad. Está equipado con un tanque de reserva para sales sólidas, un tanque químico y un sistema de dosificación. Con el nuevo sistema de dosificación desarrollada por el IDES, se consigue disminuir 40 minutos el tiempo de dosificación para cada máquina y con una única carga. POR ENG TECHNICAL DETAILS • Chamber width of 483 mm, 605 mm or 730 mm • Inner increased length of teflon sheet provides easy fabric transport and soſt treatment of the fabric. • Manuel, pneumatic and butter fly operated valves • Max. Operated tempratures 98°C to 135 °C • Automatic control with industrial PC • Adjustable winch drive combined with programble nozzle pressure permits fabric speeds of 40-423 m/min. • Nozzle combinations; Ø130 mm, Ø154 mm, Ø208 mm alternatively Ø90 mm or Ø250 mm diameter. • Wide and easy fabric loading combination with locking device. DETALHES TÉCNICOS TUR TEKNİK DETAYLAR • 483mm, 605mm veya 730mm hazne genişliği • Kolay kumaş nakli ve yumuşak ön işlem sağlayan boy teflon • Manuel, pnömatik ve kelebek uygulamalı vanalar • Maksimum işletme sıcaklığı 98 °C-135°C arasındadır. • Otomatik kontrollü boyama bilgisayarı • Düze basıncının komuta edilmesini sağlayan ayarlanabilir tambur hız kombinasyonu: 40-423 m/dk. • Düze kombinasyonları; Ø130 mm, Ø154 mm, Ø208 mm ve alternatif olarak Ø90 mm yada Ø250 mm • Geniş ve kolay kumaş yükleme kombinasyonuna sahip kilitleme kapağı 03 www.idesmakina.com.tr • 483mm, 605mm y 730mm de tamaños de contenedor • Teflón longitudinal que permite una transferencia fácil de telas y un pretratamiento suave • Válvulas manuales, neumáticas y de mariposa • La temperatura máxima de funcionamiento es entre 98 °C y 135°C • Teñido automático controlado por ordenador • La combinación de velocidad del tambor ajustable que permite ajustar la presión de la boquilla: 40-423 m/min. • Combinaciones de la boquilla; Ø130 mm, Ø154 mm, Ø208 mm y como alternativas Ø90 mm ó Ø250mm. • La tapa de cierre que permite con una combinación de carga de tela grande y fácil TUR ENG • Internal winch with adjustable frequency controlled drive motor • Freuency controlled main circulation pump • Easy-changeble filter • Reserve tank with heat exchanger • Additional tanks for chemical and dyestaff with rapid dosing system • Liquor transfer between the additional tanks and reserve tank • Cleaning system for the inner vessel walls • Pneoumatic operated drain and overflow rinsing valves • Frekans ayarlı sürücü motor ile kontrol edilen iç tambur • Frekans kontrollü ana sirkülasyon pompası • Kolay değiştirilebilir filtre • Isı eşanjörü rezerve tankı • Hızlı dozajlama sistemi ile boyar madde ve kimyasallar için ilave tankları • İlave tankı ve rezerve tankı arası sıvı transferi • İç yıkama sistemi • Pnömatik uygulamalı boşaltma ve taşar yıkama vanaları 04 www.idesmakina.com.tr POR • Tambor interior controlado con un motor de accionamiento de frecuencia ajustable • Bomba de circulación principal con control de frecuencia • Filtro fácilmente reemplazable • Tanque de reserva con intercambiador de calor • Tanques adicionales para colorantes y productos químicos con un sistema de dosificación rápida • Transferencia de líquido entre el depósito adicional y tanque de reserva • Sistema de lavado interno • Válvulas pneumáticas para el desagüe y lavado en rebosadero. ENG • Electro-pneoumatic operated power drain valves • Tube-tubesheet heat exchanger for machine • Seam detector • Electronic flowmeter for measurement of the water flow rate • Analog measurement of the liquor level • Compressed air function use for pressuring • Rigid unloading winch • Stainless steel Main panel,control panel • HT draining and cooling system TUR • Elektro-pnömatik uygulamalı pompalı blöf vanaları • Boru demetli ısı eşanjörü -makine • Uç bulma sistemi • Su debisi ölçümü için elektronik flowmetre • Sıvı seviyesi analog ölçümü • Hava yastıklama fonksiyonu • Rijid dış tambur konstrüksiyonu • Paslanmaz çelik ana pano ve kumanda panosu • HT Blöf ve soğutma sistemi 05 www.idesmakina.com.tr POR • Válvula de purga con aplicación electro-neumática y bomba • Termocambiador con haz de tubos • Sistema localizador de extremos • Medidor de flujo electrónico para la medición de flujo de agua • Medición analógica del nivel de líquido • Amortiguación de aire • La construcción rígida del tambor exterior • Panel principal y de control inoxidable • Sistema de purga HT y de refrigeración Compressed Air Line Cold water line Hot Water Line Reverse Osmosis Line Condensate Return Line Saturated Steam Line Soda Dye Chemical Salt 19 P (M.22) (M.19) PM (M.21) Flowmetre (R.2) 4 5 6 7 8 (M.3) 1 1 2 2 3 3 (M.1) 9 10 1 2 3 (M.2) Basınçlı Hava Hattı Soğuk Su Hattı Sıcak Su Hattı Reverse Osmos Hattı Kondens Hattı Doymuş Buhar Hattı Soda Hattı Boya Hattı Kimyasal Hattı Tuz Hattı (Kk.2) (Bk.2) (M.20) M P P (Bk.1) (Kk.1) Dik Rezerve PT 300 Makina PT 300 Esanjor Kimyasal Kabı Boya Kabı (Bk.7) PT 100 PT 100 6.7.1(M.7) M (Kk.6) Esanjor (R.5) (Bk.3) (Kk.3) M PT 100 (M.8) 4.5.1(M.6) (M.10) (Bk.4) (M.25) (R.6) (Bk.5) (Kk.5) PT 100 (Kk.7) (M.4) (M.9) (Bk.8) (Ort.3) (Ort.1) (Ort.4) (Ort.5) (M.23) (R.4) (M.24) Alt Kollektör 20 21 22 (R.1) (R.3) (M.15) (M.18 11 12 13 (Ort.2) (M.17) (M.11) (M.12) (M.13) Cold Drain Hot Drain Cooling water return Line Condensate Line (M.14) (R.7) 06 www.idesmakina.com.tr 17 18 14 15 16 Soğuk Blof Hattı Sıcak Blof Hattı Soğutma Suyu Dönüş Hattı Kondens Hattı 07 www.idesmakina.com.tr İDES MAKİNA TEKSTİL SAN. VE TİC. LTD. ŞTİ. Marmaracık Mah. 3. Sanayi Cad. No:10 B201 Ergene / TEKiRDAĞ Tel : +90 (282) 673 43 20 • Fax : +90 (282) 673 31 86 www.idesmakina.com.tr • E-mail: info@idesmakina.com.tr